Chlorine is a widely used oxidizing agent in desalination to control bacteria that cause biofouling. The lack of chlorine resistance in commercial desalination membranes urged the development of an alternate polymer material. In this study, commercially available copolymer (SES0005, AquafoneTM), resistant to dissolved chlorine in water, has theoretical IEC of 2.08 meq.g-1 is blended with 0.5-15 %(w/w) TiO2 nanoparticles of <25 nm diameter and 45-55 m2.g-1 surface area by using ball milling device. SEM-EDS (Scanning Electron Microscope-Energy Dispersive Spectroscopy) result supports TiO2 content and uniform distribution. The chlorine stability of membranes was evaluated in sodium hypochlorite solution from 100 to 2000 ppm (pH 9). TGA and FT-IR analysis were performed for these membranes. The 1.5 %(w/w) TiO2 nano-enhanced membrane water retention is 23 % which is ∼53 % higher than that of pristine (15 %) membrane. Tensile strength of pristine and 0.5 %(w/w) TiO2 nano-enhanced membrane is 23, and 44 MPa, respectively. TiO2 nanoparticle addition improved dimensional and mechanical properties. This study attempts to correlate the SES polymer-TiO2 interactions with the characterization techniques.
ZhangN.LiuH.L.LiJj, et al.Preparation and properties of SPAES-TiO2 hybrid membranes for direct methanol fuel cell. Chin J. Polym. SciEnglish Ed2009; 27: 895–902.
2.
KimYJLeeKSJeongMH, et al.Highly chlorine-resistant end-group cross-linked sulfonated-fluorinated poly(arylene ether) for reverse osmosis membrane. J Memb Sci2011; 378: 512–519.
3.
XieWCookJParkHB, et al.Fundamental salt and water transport properties in directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers. Polymer2011; 52: 2032–2043.
4.
ZhangXHuZZhangS, et al.Preparation and properties of cross-linked multiblock sulfonated poly(arylene ether sulfone) membranes for fuel cell applications. J App Polym Sci2011; 121: 1707–1716.
5.
LeeCHMcCloskeyBDCookJ, et al.Disulfonated poly(arylene ether sulfone) random copolymer thin film composite membrane fabricated using a benign solvent for reverse osmosis applications. J Memb Sci2012; 389: 363–371.
6.
LiuYYueXZhangS, et al.Synthesis of sulfonated polyphenylsulfone as candidates for antifouling ultrafiltration membrane. Sep Purif Technol2012; 98: 298–307.
7.
WangFHicknerMKimYS, et al.Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes. J Memb Sci2002; 197: 231–242.
8.
ZouM.FangJ.LiuJ, et al.Synthesis and preparation of sulfonated hyperbranched poly(arylene ether sulfone)/poly(ether sulfone) blend membranes for proton exchange membranes. Solid State Ionics2012; 220: 23–31.
9.
AndrewMMukundanTMcGrathJE. Sulfonated poly(arylene ether sulfone) copolymers - acid and salt form: potential biofunctional polymers. J Bioact Compat Polym2004; 19: 315–329.
10.
Di VonaMLSgrecciaETamilvananM, et al.High ionic exchange capacity polyphenylsulfone (SPPSU) and polyethersulfone (SPES) cross-linked by annealing treatment: Thermal stability, hydration level and mechanical properties. J Memb Sci2010; 350: 134–141.
11.
HanJKimKKimJ, et al.Cross-linked highly sulfonated poly(arylene ether sulfone) membranes prepared by in-situ casting and thiol-ene click reaction for fuel cell application. J Memb Sci2019; 579: 70–78.
12.
DaryaeiAJangESRoy ChoudhuryS, et al.Structure-property relationships of cross-linked disulfonated poly(arylene ether sulfone) membranes for desalination of water. Polymer (Guildf)2017; 132: 286–293.
13.
Martinez-MorlanesMJDe La Torre-GamarraCPerez-PriorMT, et al.Sulfonated polysulfone/TiO2(B) nanowires composite membranes as polymer electrolytes in fuel cells. Polymers (Basel)2021; 13: 1–19.
14.
SafarpourMKhataeeAVatanpourV. Thin film nanocomposite reverse osmosis membrane modified by reduced graphene oxide/TiO2 with improved desalination performance. J Memb Sci2015; 489: 43–54.
15.
RenJXuJJuM, et al.Long-term durable anion exchange membranes based on imidazole-functionalized poly(ether ether ketone) incorporating cationic metalorganic framework. Adv Powder Mater2022; 1: 100017.
16.
ThuyavanYLAnantharamanNArthanareeswaranG, et al.Preparation and characterization of TiO2-sulfonated polymer embedded polyetherimide membranes for effective desalination application. Desalination2015; 365: 355–364.
17.
KimSHKwakSYSohnBH, et al.Design of TiO2 nanoparticle self-assembled aromatic polyamide thin-film-composite (TFC) membrane as an approach to solve biofouling problem. J Memb Sci2003; 211: 157–165.
18.
LuoMWenQLiuJ, et al.Fabrication of SPES/Nano-TiO2 composite ultrafiltration membrane and its anti-fouling mechanism. Chin J. Chem. Engg2011; 19(1): 45–51.
19.
ParvizianFAnsariFBandehaliS. Oleic acid-functionalized TiO2 nanoparticles for fabrication of PES-based nanofiltration membranes. Chem Eng Res Des2020; 156: 433–441.
20.
KhorshidiBBiswasIGhoshT, et al.Robust fabrication of thin film polyamide-TiO2 nanocomposite membranes with enhanced thermal stability and anti-biofouling propensity. Sci Rep2018; 8: 1–10.
21.
MatindiCNHuMKadanyoS, et al.Tailoring the morphology of polyethersulfone/sulfonated polysulfone ultrafiltration membranes for highly efficient separation of oil-in-water emulsions using TiO2 nanoparticles. J Memb Sci2021; 620: 118868.
22.
RahimpourAMadaeniSSTaheriA, et al.Coupling TiO2 nanoparticles with UV irradiation for modification of polyethersulfone ultrafiltration membranes. J Memb Sci2008; 313: 158–169.
23.
AhmadALAbdulkarimAAOoiB, et al.Recent development in additives modifications of polyethersulfone membrane for flux enhancement. Chem Eng J2013; 223: 246–267.
24.
FontJMuntasellJCesariE. Poly(butylene terephthalate) poly(ethylene terephthalate) mixtures formed by ball milling. Mater Res Bull1999; 34: 157–165.
25.
ZhangGSchlarbAKTriaS, et al.Tensile and tribological behaviors of PEEK/nano-SiO2 composites compounded using a ball milling technique. Compos Sci Technol2008; 68: 3073–3080.
26.
StolleASzuppaTLeonhardtSES, et al.Ball milling in organic synthesis: Solutions and challenges. Chem Soc Rev2011; 40: 2317–2329.
27.
SchneiderFSzuppaTStolleA, et al.Energetic assessment of the suzuki–miyaura reaction: a curtate life cycle assessment as an easily understandable and applicable tool for reaction optimization. Green Chem2009; 11: 1894–1899.
28.
ZhouLZhangHZhangZ, et al.Homogeneous nanoparticle dispersion prepared with impurity-free dispersant by the ball mill technique. Particuology2013; 11: 441–447.
29.
XieWParkH-BCookJ, et al.Advances in membrane materials: desalination membranes based on directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers. Water Sci Technol2010; 613: 619–624.
30.
HarrisonWLWangFMechamJB, et al.Influence of the bisphenol structure on the direct synthesis of sulfonated poly(arylene ether) copolymers. I. J Poly Sci A: Poly Chem2003; 41: 2264–2276.
31.
PatelHAMansorNGadipelliS, et al.Superacidity in nafion/MOF hybrid membranes retains water at low humidity to enhance proton conduction for fuel cells. ACS App Mat Int2016; 8: 30687–30691.
32.
DouZZhongSZhaoC, et al.Synthesis and characterization of a series of SPEEK/TiO2 hybrid membranes for direct methanol fuel cell. J Appl Polym Sci2008; 109: 1057–1062.
33.
GuanRZouHLuD, et al.Polyethersulfone sulfonated by chlorosulfonic acid and its membrane characteristics. Eur Polym J2005; 41: 1554–1560.
34.
GeiseGMLeeHSMillerDJ, et al.Water purification by membranes: the role of polymer science. J Polym Sci B Polym Phys2010; 48: 1685–1718.
Ortiz-MedinaJInukaiSArakiT, et al.Robust water desalination membranes against degradation using high loads of carbon nanotubes. Sci Rep2018; 8: 1–12.
37.
RoySLaneOKazerooniD, et.al.Synthesis and characterization of post-sulfonated poly(arylene ether sulfone) membranes for potential applications in water desalination Synthesis and characterization of post-sulfonated poly ( arylene ether sulfone ) membranes for potential applications in water desalination. Polymer2019; 177: 250–261.
38.
ShimuraTMiyatakeKWatanabeM. Poly(arylene ether) ionomers containing sulfofluorenyl groups: effect of electron-withdrawing groups on the properties. Eur Polym. J2008; 44: 4054–4062.
39.
WonMKwonSKimTH. High performance blend membranes based on sulfonated poly(arylene ether sulfone) and poly(p-benzimidazole) for PEMFC applications. J Ind Engg Chem2015; 29: 104–111.
40.
PrashanthaKParkSG. Nanosized TiO2-filled sulfonated polyethersulfone proton conducting membranes for direct methanol fuel cells. J Appl Polym Sci2005; 98: 1875–1878.
41.
LeeHFHuangYCWangPH, et al.Synthesis of highly sulfonated polyarylene ethers containing alternating aromatic units. Mater Today Commun2015; 3: 114–121.
42.
KrishnanNNLeeHJKimHJ, et al.Sulfonated poly(ether sulfone)/sulfonated polybenzimidazole blend membrane for fuel cell applications. Eur Polym. J2010; 46: 1633–1641.
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
