FengKTangBWuP. Sulfonated graphene oxide–silica for highly selective Nafion-based proton exchange membranes. J Mater Chem A2014; 2: 16083–16092.
2.
LiHCuiZZhaoC. Synthesis and property of a novel sulfonated poly (ether ether ketone) with high selectivity for direct methanol fuel cell applications. J Membr Sci2009; 343: 164–170.
3.
ForouzandehFLiXBanhamD. Improving the corrosion resistance of proton exchange membrane fuel cell carbon supports by pentafluorophenyl surface functionalization. J Power Sources2018; 378: 732–741.
4.
MauritzKMooreR. State of understanding of Nafion. Chem Rev2004; 104: 4535.
5.
Schmidt-RohrKChenQ. Parallel cylindrical water nanochannels in Nafion fuel-cell membranes. Nat Mater2008; 7: 75–83.
6.
WangHLiXZhuangX. Modification of Nafion membrane with biofunctional SiO2 nanofiber for proton exchange membrane fuel cells. J Power Sources2017; 340: 201–209.
7.
MakinouchiTTanakaMKawakamiH. Improvement in characteristics of a Nafion membrane by proton conductive nanofibers for fuel cell applications. J Membr Sci2017; 530: 65–72.
8.
ParkaCLeeCDGuiveraM. Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs). Prog Polym Sci2011; 36: 1443–1498.
9.
RanJWuLHeY. Ion exchange membranes: new developments and applications. J Membr Sci2017; 522: 267–291.
10.
OnoYGotoRHaraM, et al.High proton conduction of organized sulfonated polyimide thin films with planar and bent backbones. Macromolecules2018; 51: 3351–3359.
11.
ChristianiLSasakiKNishiharaM. Aliphatic SPI charge transfer complex hybrid films for high temperature polymer electrolyte membrane fuel cells. J Appl Polym Sci2018; 135: 46087.
12.
WeiHChenGCaoL. Enhanced hydrolytic stability of sulfonated polyimide ionomers using bis (naphthalic anhydrides) with low electron affinity. J Mater Chem A2013; 1: 10412.
IulianelliABasileA. Sulfonated PEEK-based polymers in PEMFC and DMFC applications: a review. Int J Hydrogen Energy2012; 37: 15241–15255.
15.
WangJLiaoJYangL. Highly compatible acid-base blend membranes based on sulfonated poly (ether ether ketone) and poly (ether ether ketone-alt-benzimidazole) for fuel cells application. J Membr Sci2012; 415–416: 644–653.
16.
ChaeKKimKChoiM. Sulfonated polyether ether ketone (SPEEK)-based composite proton exchange membrane reinforced with nanofibers for microbial electrolysis cells. Chem Eng J2014; 254: 393–398.
17.
HanJKimKChoiSW. Cross-linked highly sulfonated poly (arylene ether sulfone) membranes prepared by in-situ casting and thiol-ene click reaction for fuel cell application. J Membr Sci2019: 579: 70–78.
18.
LeeSNAFYimSD. Synthesis and characterization of multi-block poly (arylene ether sulfone) membranes with highly sulfonated blocks for use in polymer electrolyte membrane fuel cells. J Membr Sci2016; 518: 50–59.
19.
KimKHeoPHwangW. Cross-linked sulfonated poly (arylene ether sulfone) containing a flexible and hydrophobic bishydroxy perfluoropolyether cross-linker for high-performance proton exchange membrane. ACS Appl Mater Interfaces2018; 10: 21788–21793.
20.
KimaKHeocPHanaJ. End-group cross-linked sulfonated poly (arylene ether sulfone) via thiol-ene click reaction for high-performance proton exchange membrane. J Power Sources2018; 401: 20–28.
21.
ChenSPanHChangZ. Synthesis and study of pyridine-containing sulfonated polybenzimidazole multiblock copolymer for proton exchange membrane fuel cells. Ionics2018; 25: 1–11.
22.
LiWGuoXAiliD. Sulfonated copolyimide membranes derived from a novel diamine monomer with pendant benzimidazole groups for fuel cells. J Membr Sci2015; 481: 44–53.
23.
ZhangXChenSWangL. Graft-crosslinked copolymers based on poly (arylene ether ketone)-GC-sulfonated Poly (arylene ether sulfone) for PEMFC applications. Macromol Rapid Commun2011; 32: 1108–1113.
LeeKHChuJYYooDJ. Enhanced performance of a sulfonated poly (arylene ether ketone) block copolymer bearing pendant sulfonic acid groups for polymer electrolyte membrane fuel cells operating at 80% relative humidity. ACS Appl Mater Interfaces2018; 10: 20835–20844.
27.
ZhouLZhuJChenDY. Tetra-alkylsulfonate functionalized poly (aryl ether) membranes with nanosized hydrophilic channels for efficient proton conduction. J Energy Chem2020; 40: 57–64.
28.
LiuWWangZDuX. Poly (arylene ether ketone) with an ultrahigh-selectivity hydrophilic phase proton transport channel by grafting sulfonated benzotriazole groups onto pendant chains. ACS Sustain Chem Eng2020; 8: 6505–6516.
29.
ZhaoYLiXWangZY, et al.Preparation of graft poly (arylene ether sulfone)-based copolymer with enhanced phase-separated morphology as proton exchange membranes via atom transfer radical polymerization. Polymers2019; 11: 1297.
30.
LiHQLiuXJWangZ. Proton exchange membranes with cross-linked interpenetrating network of sulfonated polyvinyl alcohol and poly (2-acrylamido-2-methyl-1-propanesulfonic acid): excellent relative selectivity. J Membr Sci2020; 595: 117511.
XuJNiHZhangH. Direct polymerization of a novel sulfonated poly (arylene ether ketone sulfone)/sulfonated poly (vinyl alcohol) cross-linked membrane for direct methanol fuel cell applications. J Membr Sci2015; 492: 505–517.
33.
XiaYFLiuBWangYH. Effects of covalent bond interactions on properties of polyimide grafting sulfonated polyvinyl alcohol proton exchange membrane for vanadium redox flow battery applications. J Power Sources2019; 433: 126680.
34.
ZhangXXXiaYFWangYH. Preparation of sulfonated polysulfone/sulfonated titanium dioxide hybrid membranes for DMFC applications. J Appl Polym Sci2020; 137:48938.
35.
YuHLXiaYFWangYH. Improved chemical stability and proton selectivity of semi interpenetrating polymer network amphoteric membrane for vanadium redox flow battery application. J Appl Polym Sci2021; 138: 49803.
GindtBPAbebeDGTangZJ. Nanoporous polysulfone membranes via a degradable block copolymer precursor for redox flow batteries. J Mater Chem A2016; 4: 4288.
38.
MoritaniTKurumaIShibataniK. Tacticity of poly (vinyl alcohol) studied by nuclear magnetic resonance of hydroxyl protons. Macromolecules1972; 5: 577–580.
39.
DongHXiaoKJTangX. Preparation and characterization of polyurethane (PU)/polyvinylidene fluoride (PVDF) blending membrane. Desalin Water Treat2016; 57: 3405–3413.
40.
YuHLXiaYFZhangH. Preparation of sulfonated polyimide/polyvinyl alcohol composite membrane for vanadium redox flow battery applications. Polym Bull2020. DOI: 10.1007/s00289-020-03314-0.
41.
YangT. Composite membrane of sulfonated poly (ether ether ketone) and sulfated poly (vinyl alcohol) for use in direct methanol fuel cells. J Membr Sci2009; 342: 221–226.
42.
XuJMWangZZhangHX. Direct polymerization of novel functional sulfonated poly (arylene ether ketone sulfone)/sulfonated poly (vinyl alcohol) with high selectivity for fuel cells. RSC Adv2016; 6: 27725.
