In this work, the monomer N, N′-bis(4-fluorobenzamide)dicyclohexyl methane (BFDCM) was synthesized successfully by 4-fluorobenzoylchloride and 4,4′-diaminodicyclohexylmethane through interfacial reaction, and then the monomer BFDCM and 1,4-benzenediol (HQ) or 4.4′-biphenol (BH) were used to prepare the novel poly(arylene ether amide) (HQ-BFDCM and BH-BFDCM) containing an aliphatic ring in the main chain by nucleophilic substitution in NMP solution. These two polymers exhibited the inherent viscosities ranging from 0.828 to 1.044 dL g−1, high glass-transition temperatures (Tg) of 214.1–235.0 °C, and weight-loss temperature (T5%) of 425.2–441.3 °C. The polymers HQ-BFDCM and BH-BFDCM could completely or partly dissolve in some polar solutions, such as NMP, DMF, and so on, and they showed moderate corrosion resistance. Additionally, the obtained polymers HQ-BFDCM and BH-BFDCM exhibited good optical property, and the optical transmittances of HQ-BFDCM and BH-BFDCM were 74% and 80% at 450 nm, respectively, which showed that they could be applied to the heat-resistant optical films.
LiuBDaiYRobertsonGP, et al.A comparative structure-property study of methylphenylated and fluoromethylphenylated poly(aryl ethers) and their gas permeabilities and permselectivities. Polymer2005; 46: 11279–11287.
3.
ShuklaDNegiYSUppadhyayaJS, et al.Synthesis and modification of poly(ether ether ketone) and their properties: a review. Polym Rev2012; 52: 189–228.
4.
ZhaoZWuALuanS, et al.Preparation and characterization of a positively charged nanofiltration membrane based on poly(arylene ether sulfone) with tertiary amine groups. J Polym Res2015; 22: 168.
5.
ZhanYYangXGuoH, et al.Cross-linkable nitrile functionalized graphene oxide/poly(arylene ether nitrile) nanocomposite films with high mechanical strength and thermal stability. J Mater Chem2012; 22: 5602–5608.
6.
ChenLPuZJYangJ, et al.Synthesis and properties of sulfonated polyarylene ether nitrile copolymers for PEM with high thermal stability. J Polym Res2013; 20(1–8): 45.
7.
LuJYanGZhangG, et al.Synthesis and property investigation of poly(arylene ether)s with pendant cyclohexyl units. J Polym Res2017; 24: 152.
8.
XiaJZhangJLiaoG, et al.Copolymerization and blending of poly(phthalazinone ether ketone)s to improve their melt processability. J Appl Polym Sci2007; 103: 2575–2580.
9.
da Silva BurgalJPeevaLGKumbharkarS, et al.Organic solvent resistant poly(ether-ether-ketone) nanofiltration membranes. J Membr Sci2015; 479: 105–116.
10.
DevauxJDelimoyDDaoustD, et al.On the molecular weight determination of a poly(aryl-ether-ether-ketone) (PEEK). Polymer1985; 26: 1994–2000.
11.
ZhengPPuZJiaK, et al.Crystallized polyarylene ether nitrile blends with improved thermal, mechanical, dielectric properties, and processability. Polym Compos2015; 38: 126–131.
12.
ChenYRenFDaiJG, et al.Poly(ether ether ketone)s containing benzene pendant in the molecular chain: synthesis, characterization and optical properties. High Perform Polym2021; 33: 546–553.
13.
SrinivasanSAMcGrathJE. Amorphous bisphenol A based poly(arylene ether) modified cyanate ester networks. High Perform Polym1993; 5(4): 259–274.
14.
ShaverATYinKBorjiginH, et al.Fluorinated poly(arylene ether ketone)s for high temperature dielectrics. Polymer2016; 83: 199–204.
15.
LiuBHuWChenC, et al.Soluble aromatic poly(ether ketone)s with a pendant 3,5-ditrifluoromethylphenyl group. Polymer2004; 45: 3241–3247.
16.
LiYZhangGWangX, et al.Synthesis and properties of copolymers of poly(ether ether sulfone)/semiaromatic polyamides (PEES/PA). Polym Eng Sci2015; 56: 44–50.
17.
ZhengPXuMLiuX, et al.Sulfonated poly(arylene ether nitrile)s containing cross-linkable nitrile groups for proton exchange membranes. Solid State Ionics2018; 316: 110–117.
18.
ShengS-RZhangWHuangS-P, et al.A novel class of organosoluble poly(arylene ether nitrile) copolymers containing methyl substituent and cardo xanthene moiety. Polym Adv Technol2012; 23: 441–446.
19.
TangHPuZHuangX, et al.Novel blue-emitting carboxyl-functionalized poly(arylene ether nitrile)s with excellent thermal and mechanical properties. Polym Chem2014; 5: 3673–3679.
20.
ChenLPuZJYangJ, et al.Synthesis and properties of PEKN with bisphenol-A moiety copolymer. China Plastics Industry2012; 40: 10–13.
21.
HsiaoS-HChangY-H. New soluble aromatic polyamides containing ether linkages and laterally attached p-terphenyls. Eur Polym J2004; 40: 1749–1757.
22.
TamboliABMaldarNN. Synthesis and characterization of processable aromatic poly(ether ether ketone amide)s modified by phenoxy and 1,3 ketone moiety linkages. Polym Bull2020; 77: 6591–6605.
23.
TamboliABMaldarNN. Soluble aromatic polyamides containing pendant pentadecyl substituted methoxy phenyl unit. J Polym Res2019; 26: 139.
24.
ZhangGYanG-MYuT, et al.Semiaromatic polyamides containing carboxyl unit: synthesis and properties. IN Eng Chem Res2017; 56: 9275–9284.
25.
RenHHLiPCWuYN, et al.Semi‐aromatic copoly(ether ether amide): Synthesis and properties. J Appl Polym Sci2021; 138: 50940.
26.
ZhangGZhouY-XKongY, et al.Semiaromatic polyamides containing ether and different numbers of methylene (2-10) units: synthesis and propertieserent numbers of methylene (2–10) units: synthesis and properties. RSC Adv2014; 4: 63006–63015.
27.
ZhangGHuangG-SLiD-S, et al.Facile Synthesis of Processable Semiaromatic Polyamides Containing Thioether Units. IN Eng Chem Res2011; 50: 7056–7064.
28.
ZhangGCaoS-JRenH-H, et al.Semi-aromatic polyamides containing methylene and thioether units: synthesis and membrane properties. RSC Adv2016; 6: 99184–99194.
29.
WakitaJSekinoHSakaiK, et al.Molecular design, synthesis, and properties of highly fluorescent polyimides. J Phys Chem B2009; 113: 15212–15224.
WuZYanGLuJ, et al.Thermal plastic and optical transparent polyimide derived from isophorone diamine and sulfhydryl compounds. IN Eng Chem Res2019; 58: 6992–7000.
32.
ZhangGZhouY-xLiY, et al.Investigation of the synthesis and properties of isophorone and ether units based semi-aromatic polyamides. RSC Adv2015; 5: 49958–49967.
33.
YanG-mZhangGRenH-h, et al.Synthesis and characterization of semiaromatic polyamides with dicyclohexane units. RSC Adv2016; 6: 76490–76497.
34.
ZhaoYSchiraldiDA. Thermal and mechanical properties of polyhedral oligomeric silsesquioxane (POSS)/polycarbonate composites. Polymer2005; 46: 11640–11647.
35.
LiuHLiuDYaoF, et al.Fabrication and properties of transparent polymethylmethacrylate/cellulose nanocrystals composites. Bioresour Technology2010; 101: 5685–5692.
