Abstract
Drawing self-cleaning technology into polymer membranes offers an extensive solution to overcome the membrane fouling obstacle. Herein, the GO-ZnO-Ag nano-hybrid particles with photocatalytic activity prepared via the microwave hydrothermal method were immobilized in poly(m-phenylene isophthalamide) (PMIA) membranes. Not only was the thorny issue in catalyst recovery avoided, but also the satisfactory photocatalytic self-cleaning performance of the polymer membrane was awarded. GO and noble metal silver nanoparticles (AgNPs) acted as a conductive electron transfer carrier and an electron host, respectively, which hindered the recombination rate of excited electrons and holes on ZnO under UV light. The UV-driven PMIA membrane photodegradation rates of MB and Cr(VI) were up to 97.2% and 94.3%, respectively, at 150 min on photodegradation kinetics. Also, MB was completely degraded at 180 min. For MB and Cr(VI) mix solutions, their degradation efficiencies were 78.1% and 71%, respectively. The BSA rejection rate of the modified polymer membrane was 93.8%, and the water flux was 408.8 (L·m−2·h−1). Permeability was maintained at a high level after repeated use. Therefore, the newly designed PMIA/GO-ZnO-Ag series membranes could expand the application of polymers in wastewater disposal industry.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
