Abstract
A set of anthracene containing polyfluorenes (PFs) having 9,10-diphenylanthracene with alkyl substituents and aniline containing fluorenes were prepared. Commonly, light-emitting polymers were synthesized using expensive palladium-like catalysts. In the present work, palladium was replaced by copper as a cost-effective PF synthesis catalyst, which is also suitable for large-scale polymer synthesis. Synthesized PFs emit light in the blue region with a bandgap of 2.87–2.90 eV. Thermally stable PFs had a decomposition temperature of more than 305°C and a glass transition temperature of 125–138°C. PFs were soluble in organic solvents and had a molecular weight of around 21,700–25,500. The electrochemical study of these PFs showed low level of highest occupied molecular orbital (HOMO) energy of −5.16 to −5.26 eV, which was significantly higher than that of PF (5.7 eV). These findings suggested that the resulting PFs could be used as a component of the light-emitting diode.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
