Restricted accessResearch articleFirst published online 2020-8
Curing behavior,thermal,and mechanical properties of N,N ′-(4,4′-diphenylmethane)bismaleimide/2,2′-diallylbisphenol A/3-allyl-5,5-dimethylhydantoin resin system
The 3-allyl-5,5-dimethylhydantoin (ADMH) was synthesized and characterized by Fourier transform infrared spectroscopy, 1H-nuclear magnetic resonance (NMR), and 13C-NMR spectroscopy. Then, the ADMH was used to modify the N,N′-(4,4′-diphenylmethane)bismaleimide (BDM)/2,2′-diallylbisphenol A (DABPA) resin to obtain the BDM/DABPA/ADMH resin system (BDA). The curing behavior was investigated by non-isothermal differential scanning calorimetry and the activation energy () was obtained by Kissinger and Ozawa models. The thermomechanical property was measured by dynamic mechanical analysis. Analysis of the data revealed the complexity of the curing reaction, which was firstly dominated by the Ene reaction of allyl and C=C double bond at low and medium temperatures and was further governed by the Diels–Alder reaction and the anionic imide oligomerization occurred at high temperatures. The results demonstrated that 1-BDA had the best thermal and mechanical properties exhibiting excellent modification effect of ADMH.
ChenXYuanLZhangZ, et al.New glass fiber/bismaleimide composites with significantly improved flame retardancy, higher mechanical strength and lower dielectric loss. Compos Part B: Eng2015; 71: 96–102.
2.
LiuPQuCWangD, et al.High-performance bismaleimide resins with low cure temperature for resin transfer molding process. High Perform Polym2016; 29(3): 298–304.
3.
LiuMDuanYYanW, et al.Diazonium functionalization of graphene nanosheets and impact response of aniline modified graphene/bismaleimide nanocomposites. Mater Design2014; 53(1): 466–474.
4.
RadueMSVarshneyVBaurJW, et al.Molecular modeling of cross-linked polymers with complex cure pathways: a case study of bismaleimide resins. Macromolecules2018; 51(5): 1830–1840.
5.
HummelDOHeinenKUStenzenbergerH, et al.Infrared spectroscopic determination of the kinetic data of the polymerization of aliphatic bismaleimides. J Appl Polym Sci1974; 18(7): 2015–2024.
6.
ChenYGuoHGengC, et al.Effect of poly(ether ether ketone) and allyl compounds on microstructure and properties of bismaleimide. J Mater Sci: Mater El2019; 30(2): 991–1000.
7.
QuCZhaoLWangD, et al.Bis[4-(4-maleimidephen-oxy)phenyl)]propane/N, N-4,4′-bismaleimidodiphenylmethyene blend modified with diallyl bisphenol A. J Appl Polym Sci2014; 131(12): 40395.
8.
DeviKANairCPRNinanKN. Diallyl bisphenol A-Novolac epoxy system cocured with bisphenol-a-bismaleimide—cure and thermal properties. J Appl Polym Sci2010; 106(2): 1192–1200.
9.
Ambika DeviKReghunadhan NairCPNinanKN. Diallyl bisphenol A—novolac epoxy system cocured with bisphenol-A-bismaleimide—cure and thermal properties. J Appl Polym Sci2007; 106(2): 1192–1200.
10.
IredaleRJWardCHamertonI.Modern advances in bismaleimide resin technology: a 21st century perspective on the chemistry of addition polyimides. Prog Polym Sci2017; 69: 1–21.
11.
GouriCReghunadhan NairCPRamaswamyR, et al.Thermal decomposition characteristics of Alder-ene adduct of diallyl bisphenol A novolac with bismaleimide: effect of stoichiometry, novolac molar mass and bismaleimide structure. Eur Polym J2002; 38(3): 503–510.
12.
XiongXRongRPingC, et al.Preparation and properties of modified bismaleimide resins based on phthalide-containing monomer. J Appl Polym Sci2013; 130(2): 1084–1091.
13.
HsiaoSHYangCPChenSH. Synthesis and thermal properties of bismaleimides with ortho -linked aromatic units. J Polym Res1999; 6(3): 141–148.
14.
LiuSWangYChenP, et al.Synthesis and properties of bismaleimide resins containing phthalide cardo and cyano groups. High Perform Polym2018; 31(4): 462–471.
15.
GopalaAWuHHarrisF, et al.Investigation of readily processable thermoplastic-toughened thermosets. I. BMIs toughened via a reactive solvent approach. J Appl Polym Sci2015; 69(3): 469–477.
16.
RakuttDFitzerEStenzenbergerHD. The fracture toughness and morphology spectrum of bismaleimide/polyetherimide moulding compounds. High Perform Polym1990; 2(2): 133–147.
17.
WangYKouKZhuoL, et al.Thermal, mechanical and dielectric properties of BMI modified by the Bis allyl benzoxazine. J Polym Res2015; 22(4): 51.
18.
JenaRKYueCYSkMM, et al.A novel high performance bismaleimide/diallyl bisphenol A (BMI/DBA)–epoxy interpenetrating network resin for rigid riser application. RSC Adv2015; 5(97): 79888–79897.
19.
HanYZhouHGeK, et al.Toughness reinforcement of bismaleimide resin using functionalized carbon nanotubes. High Perform Polym2014; 26(8): 874–883.
20.
SipautCSMansaRFPadavettanV, et al.The effect of surface modification of silica nanoparticles on the morphological and mechanical properties of bismaleimide/diamine matrices. Adv Polym Technol2015; 34(2).
21.
FasceDPWilliamsRJJ. Polycondensation of bismaleimides with aromatic diamines. Polym Bull1995; 34(5): 515–522.
22.
JiangHWangRFarhanS, et al.Optimization and preparation of an allyl phenoxy-modified bismaleimide resin. High Perform Polym2015; 28(6): 669–681.
23.
WangKWangYChenP, et al.Novel bismaleimide resins modified by allyl compound containing liquid crystalline structure. Adv Polym Technol2016; 37(1): n/a–n/a.
24.
MengJXiaoH. Synthesis and exfoliation of bismaleimide–organoclay nanocomposites. Polymer2004; 45(26): 9011–9018.
25.
QinHMatherPTBaekJB, et al.Modification of bisphenol-A based bismaleimide resin (BPA-BMI) with an allyl-terminated hyperbranched polyimide (AT-PAEKI). Polymer2006; 47(8): 2813–2821.
26.
HuXFanJYueCY, et al.Enhancement of the processibility of bismaleimide resins via copolymerisation with allyl organo-boron compounds. J Mater Process Tech1999; 89-90: 544–549.
27.
ZhaoLLiuPLiangG, et al.The origin of the curing behavior, mechanical and thermal properties of surface functionalized attapulgite/bismaleimide/diallyl bisphenol composites. Appl Surf Sci2014; 288: 435–443.
PanNWangYRenX, et al.Graphene oxide as a polymeric N-halamine carrier and release platform: highly-efficient, sustained-release antibacterial property and great storage stability. Mater Sci Eng: C2019; 103: 109877.
30.
WeiXWangZZhangZ, et al.Surface modification of commercial aromatic polyamide reverse osmosis membranes by graft polymerization of 3-allyl-5,5-dimethylhydantoin. J Membrane Sci2010; 351(1-2): 222–233.
31.
ZhangZWangZWangJ, et al.Enhancing chlorine resistances and anti-biofouling properties of commercial aromatic polyamide reverse osmosis membranes by grafting 3-allyl-5,5-dimethylhydantoin and N, N′-methylenebis(acrylamide). Desalination2013; 309: 187–196.
32.
WangLXieJGuL, et al.Preparation of antimicrobial polyacrylonitrile fibers: blending with polyacrylonitrile-co-3-allyl-5,5-dimethylhydantoin. Polym Bull2006; 56(2): 247–256.
33.
WelXZhiWZheZ, et al.Surface modification of commercial aromatic polyamide reverse osmosis membranes by graft polymerization of 3-allyl-5,5-dimethylhydantoin. J Membrane Sci2010; 351(1): 222–233.
34.
ZheZZhiWWangJ, et al.Enhancing chlorine resistances and anti-biofouling properties of commercial aromatic polyamide reverse osmosis membranes by grafting 3-allyl-5,5-dimethylhydantoin and N, N′-methylenebis(acrylamide). Desalination2013; 309(3): 187–196.
35.
KumarSSamalSKMohantyS, et al.Study of curing kinetics of anhydride cured petroleum-based (DGEBA) epoxy resin and renewable resource based epoxidized soybean oil (ESO) systems catalyzed by 2-methylimidazole. Thermochim Acta2017; 654: 112–120.
36.
DhanalakshmiJPPitchaimariGAlamS, et al.High-temperature matrix resins based on bispropargyl ethers (BPEs)—part 2: curing kinetics of structurally diverse BPEs and their blends with bismaleimide. High Perform Polym2014; 26(7): 691–702.
WangFHuangZLiuY, et al.Novel cardanol-containing boron-modified phenolic resin composites: non-isothermal curing kinetics, thermal properties, and ablation mechanism. High Perform Polym2016; 29(3): 279–288.
39.
OzawaT. Kinetic analysis of derivative curves in thermal analysis. J Thermal Anal1970; 2(3): 301–324.
40.
OzawaT. Critical investigation of methods for kinetic analysis of thermoanalytical data. J Thermal Anal1975; 7(3): 601–617.
41.
ChenCLiYGuY, et al.An improved simplified approach for curing kinetics of epoxy resins by nonisothermal differential scanning calorimetry. High Perform Polym2017; 30(3): 303–311.
42.
ParkerCOEmmonsWDRolewiczHA, et al.Chemistry of dinitroacetonitrile—I: preparation and properties of dinitroacetonitrile and its salts. Tetrahedron1962; 17(1): 79–87.
43.
NoblePBorgardtFGReedWL. Chemistry of the aliphatic polynitro compounds and their derivatives. Chem Rev1964; 64(1): 19–57.
44.
SunYSunG.Novel regenerable N-halamine polymeric biocides. I. Synthesis, characterization, and antibacterial activity of hydantoin-containing polymers. J Appl Polym Sci2001; 80(13): 2460–2467.
45.
MorganRJShinEERosenbergB, et al.Characterization of the cure reactions of bismaleimide composite matrices. Polymer (Guildf)1997; 38(3): 639–646.
46.
PhelanJCChongSPS.Cure characterization in bis(maleimide)/diallylbisphenol A resin by fluorescence, FT-IR, and UV-reflection spectroscopy. Macromolecules1997; 30(22): 6845–6851.
47.
BalakrishnanPSBalajiKMurugavelSC. Synthesis and chemical curing kinetics of epoxy resin containing α,β-unsaturated carbonyl moiety in the main chain. High Perform Polym2011; 23(3): 263–270.
48.
ZhaoXHuangZSongP, et al.Curing kinetics and mechanical properties of fast curing epoxy resins with isophorone diamine and N-(3-aminopropyl)-imidazole. J Appl Polym Sci2019; 136(37): 47950.
49.
WangHJianWGuoH, et al.A novel high temperature vinylpyridine-based phthalonitrile polymer with a low melting point and good mechanical properties. Polym Chem2018; 9(8):976–983. DOI: 10.1039.C7PY01990D.
50.
YuXYNaitoKKangC, et al.Synthesis and properties of a high-temperature naphthyl-based phthalonitrile polymer. Macromol Chem Phys2013; 214(3): 361–369.
51.
ZhouXQiuSCaiW, et al.Construction of hierarchical MoS2@TiO2 structure for the high performance bimaleimide system with excellent fire safety and mechanical properties. Chem Eng J2019; 369: 451–462.
52.
YeWWeiWFeiX, et al.Six-arm star-shaped polymer with cyclophosphazene core and poly(ε-aprolactone) arms as modifier of epoxy thermosets. J Appl Polym Sci2017; 134(2): 44384.
53.
ShanSChenXXiZ, et al.The effect of nitrile-functionalized nano-aluminum oxide on the thermomechanical properties and toughness of phthalonitrile resin. High Perform Polym2017; 29(1): 113–123.
