Low-viscosity novel bismaleimide was mixed with surface-modified Si 3N4 nanoparticles to form nanocomposites using high shear and ultrasonic process. Impact strength, flexural strength, and storage modulus of the nanocomposites with various contents of Si3N4 nanoparticles were investigated. The mechanical properties were optimal with 3.0% mass fraction of surface-modified Si3N4 nanoparticles. In comparison to the neat bismaleimide resin the impact and flexural strengths of the nanocomposites increased by 52.3% and 20.9%, respectively, and the storage modulus showed a 54% increase at room temperature while the glass-transition temperature of nanocomposites was slightly decreased with the addition of Si3N4 nanoparticles. Surface-modified Si3N 4 nanoparticles as fillers reinforced the toughness of the bismaleimide resin, which was confirmed by scanning electronic microscope.
Liu, X.Y. , Yu, Y.F. and Li , S.J. (2006). Viscoelastic Phase Separation in Polyethersulfone Modified Bismaleimide Resin , European Polymer Journal, 42: 835-842.
3.
Cheng, Q.F. , Fang, Z.P. and Yi, X.S. ( 2008). Ex Situ Concept for Toughening the RTMable BMI Matrix Composites, Part I: Improving the Interlaminar Fracture Toughness, Journal of Applied Polymer Science, 109: 1625-1634.
4.
Iijima, T., Hayashi, N. and Oyama, T. ( 2004). Modification of Bismaleimide Resin by Soluble Poly (Ester Imide) Containing Trimellitimide Moieties, Polymer International , 53: 1417-1425.
5.
Iijima, T., Yuasa, N. and Tomoi, M. ( 2001). Modification of Three-component Bismaleimide Resin by Poly (Phthaloyl Diphenyl Ether) and Related Copolymers, Journal of Applied Polymer Science, 82: 2991-3000.
6.
Zhang, B.Y. , Li. P. and Chen, X.B. ( 1998). Studies of Modified Bismaleimide Resins, Part 1: The Influence of Resin Composition on Thermal and Impact Properties, Journal of Materials Science, 33: 5683-5687.
7.
Iijima, T., Ono, H. and Tomoi, M. ( 2001). Modification of Bismaleimide Resins by Poly (Ethylene Phthalate-co-ethylene Terephthalate), Poly (Ethylene Phthalate-co-ethylene 4,4'-Biphenyl Dicarboxylate), and Poly (Ethylene Phthalate-co-ethylene 2,6-Naphthalene Dicarboxylate), Journal of Applied Polymer Science, 81: 2352-2367.
8.
Devi, K.A., Nair, C.P.R. and Ashari, G.V. ( 2008). Properties of Glass Laminates of Novolac Epoxy - Diallyl Bisphenol A-bismaleimide Resins, Polymers & Polymer Composites , 16: 199-208.
9.
Nair, C.P.R. , Francis, T., Vijayan, T.M. and Krishnan, K. ( 1999). Sequential Interpenetrating Polymer Networks from Bisphenol A Based Cyanate Ester and Bismaleimide: Properties of the Neat Resin and Composites , Journal of Applied Polymer Science, 74: 2737-2746.
10.
Wetzel, B., Rosso, P., Haupert, F. and Friedrich, K. ( 2006). Epoxy Nanocomposites - Fracture and Toughening Mechanisms , Engineering Fracture Mechanics, 73: 2375-2398.
11.
Kontou, E. and Niaounakis, M. ( 2006). Thermo-mechanical Properties of LLDPE/SiO2 Nanocomposites , Polymer, 47: 1267-1280.
12.
Ma, J., Mo, M.S. and Du, X.S. ( 2008). Effect of Inorganic Nanoparticles on Mechanical Property, Fracture Toughness and Toughening Mechanism of Two Epoxy Systems , Polymer, 49: 3510-3523.
13.
Zhu, A.P. , Cai, A.Y. and Zhou, W.D. (2008). Effect of Flexibility of Grafted Polymer on the Morphology and Property of Nanosilica/PVC Composites , Applied Surface Science, 254: 3745-3752.
14.
Su, H.L. , Hsu, J.M. and Pan , J.P. (2007). Silica Nanoparticles Modified with Vinyltriethoxysilane and Their Copolymerization with N,N'-bismaleimide-4,4'-diphenylmethane , Journal of Applied Polymer Science, 103: 3600-3608.
15.
Chen, C.G., Justice, R.S. and Schaefer, D.W. ( 2008). Highly Dispersed Nanosilica-epoxy Resins with Enhanced Mechanical Properties, Polymer, 49: 3805-3815.
16.
Vejayakumaran, P., Rahman, I.A. and Sipaut, C.S. (2008). Structural and Thermal Characterizations of Silica Nanoparticles Grafted with Pendant Maleimide and Epoxide Groups, Journal of Colloid and Interface Science, 328: 81-91.
17.
Yan, H.X. , Li, P.B. and Ning, R.C. (2008). Tribological Properties of Bismaleimide Composites with Surface-modified SiO2 Nanoparticles, Journal of Applied Polymer Science, 110: 1375-1381.
18.
Liang, G.Z. and Hu, X.L. (2004). Aluminum-borate-whiskers-reinforced Bismaleimide Composites. 1: Preparation and Properties, Polymer International, 53: 670-674.
19.
Cao, J.Q. , Wang, Y.X., Yu , J.F. and Xia , J.Y. (2004). Preparation and Radiolabeling of Surface-modified Magnetic Nanoparticles with Rhenium-188 for Magnetic Targeted Radiotherapy, Journal of Magnetism and Magnetic Materials , 277: 165-174.
20.
Du, K., Fu, W.Y., Wei, R.H., Yang, H.B. and Xu, J. ( 2008). Ultrasonic-Assisted Synthesis of Highly Dispersed MoO3 Nanospheres Using 3-Mercaptopropyltrimethoxysilane, Ultrasonics Sonochemistry, 15: 233-238.
21.
John, C.P. and Chong, S.P.S. ( 1997). Cure Characterization in Bismaleimide/Diallylbisphenol A Resin by Fluorescence, FT-IR and UV-reflection Spectroscopy, Macromolecules, 30: 6845-6851.
22.
Zhang, H. and Tang, L.C. ( 2008). Fracture Behaviours of In Situ Silica Nanoparticle-filled Epoxy at Different Temperatures, Polymer, 49: 3816-3825.
23.
Miyagawa, H. , Misra, M. and Drzal, L.T. (2005). Novel Biobased Nanocomposites from Functionalized Vegetable Oil and Organically-modified Layered Silicate Clay, Polymer, 46: 445-453.
