A graphene oxide (GO) immobilized with layered double hydroxide (CoAl-LDH/GO) nanohybrid was prepared via a hydrothermal method and characterized by transmission electron microscopy, field emission scan electronic microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and thermogravimetric analysis (TGA). The TGA results show that the immobilization of CoAl-LDH nanoparticles on GO surface greatly promotes the thermal stability of GO. More importantly, the incorporation of the CoAl-LDH/GO nanohybrid into PF foams leads to not only a great improvement in their mechanical strengths but also a reduction in their brittleness and friability. Specifically, compared to neat phenolic (PF) foam, at only 0.9 phr (parts per hundred of resin by mass) of CoAl-LDH/GO, the compressive and flexural strengths of the modified PF foam increase by 54.8% and 35.2%, respectively, and pulverization ratio decreases by 55.2%. The addition of the CoAl-LDH/GO nanohybrid also results in an increase in the limiting oxygen index and a decrease in the peak heat release of the modified PF foam in cone calorimeter test. Moreover, the thermal stability of the PF foam is enhanced by the addition of the nanohybrid.
SilvaMCTakahashiJAChaussyD. Composites of rigid polyurethane foam and cellulose fiber residue. J Appl Polym Sci2010; 117(6): 3665–3672.
3.
AuadMLZhaoLShenH. Flammability properties and mechanical performance of epoxy modified phenolic foams. J Appl Polym Sci2007; 104(3): 1399–1407.
4.
WilliamsMKWeiserESFesmireJE. Effects of cell structure and density on the properties of high performance polyimide foams. Polym Adv Technol2005; 16(2–3): 167–174.
5.
ShiLLiZMXieBH. Flame retardancy of different-sized expandable graphite particles for high-density rigid polyurethane foams. Polym Int2006; 55(8): 862–871.
6.
ZhangHKuoYYGereckeAC. Co-release of hexabromocyclododecane (HBCD) and nano- and microparticles from thermal cutting of polystyrene foams. Environ Sci Technol2012; 46(20): 10990–10996.
7.
LefebvreJBastinBLeBrasM. Thermal stability and fire properties of conventional flexible polyurethane foam formulations. Polym Degrad Stab2005; 88(1): 28–34.
8.
ShenHLavoieAJNuttSR. Enhanced peel resistance of fiber reinforced phenolic foams. Compos A Appl Sci Manuf2003; 34(10): 941–948.
YangHWangXYuanH. Fire performance and mechanical properties of phenolic foams modified by phosphorus-containing polyethers. J Polym Res2012; 19(3): 9831.
11.
MaYWangJXuY. Preparation and characterization of phenolic foams with eco-friendly halogen-free flame retardant. J Therm Anal Calorim2013; 114(3): 1143–1151.
12.
PilatoL. Phenolic resins: 100 years and still going strong. React Funct Polym2013; 73(2): 270–277.
13.
GaoMYangYLXuZQ. Mechanical and flame retardant properties of phenolic foam modified with polyethylene glycol as toughening agent. Adv Mater Res2013; 803: 21–25.
14.
HorikawaTOgawaKMizunoK. Preparation and characterization of the carbonized material of phenol-formaldehyde resin with addition of various organic substances. Carbon2003; 41(3): 465–472.
15.
YuanHXingWYangH. Mechanical and thermal properties of phenolic/glass fiber foam modified with phosphorus-containing polyurethane prepolymer. Polym Int2013; 62(2): 273–279.
YangZYuanLGuY. Improvement in mechanical and thermal properties of phenolic foam reinforced with multiwalled carbon nanotubes. J Appl Polym Sci2013; 130(3): 1479–1488.
18.
ChaeHKSiberio-PerezDYKimJ. A route to high surface area, porosity and inclusion of large molecules in crystals. Nature2004; 427(6974): 523–527.
19.
LiuXShaoXYWangLY. Thermal stability and mechanical properties of solution mixing-processed co-polyamide-graphene composites at extremely low graphene loading. High Perform Polym2016. DOI:10.1177/0954008316674344
20.
SangBLiZWLiXH. Graphene-based flame retardants: a review. J Mater Sci2016; 51(18): 8271–8295.
21.
YanDXuLChenC. Enhanced mechanical and thermal properties of rigid polyurethane foam composites containing graphene nanosheets and carbon nanotubes. Polym Int2012; 61(7): 1107–1114.
22.
BaoCSongLWilkieCA. Graphite oxide, graphene, and metal-loaded graphene for fire safety applications of polystyrene. J Mater Chem2012; 22(32): 16399–16406.
23.
BaoCSongLXingW. Preparation of graphene by pressurized oxidation and multiplex reduction and its polymer nanocomposites by masterbatch-based melt blending. J Mater Chem2012; 22(13): 6088–6096.
24.
HuangGChenSTangS. A novel intumescent flame retardant-functionalized graphene: nanocomposite synthesis, characterization, and flammability properties. Mater Chem Phys2012; 135(2): 938–947.
25.
BaoCGuoYYuanB. Functionalized graphene oxide for fire safety applications of polymers: a combination of condensed phase flame retardant strategies. J Mater Chem2012; 22(43): 23057–23063.
26.
LiXYWangZZWuL. Preparation of a silica nanospheres/graphene oxide hybrid and its application in phenolic foams with improved mechanical strengths, friability and flame retardancy. RSC Adv2015; 5(121): 99907–99913.
27.
GaoZWangJLiZ. Graphene nanosheet/Ni2+/Al3+ layered double-hydroxide composite as a novel electrode for a supercapacitor. Chem Mater2011; 23(15): 3509–3516.
28.
Manzi-NshutiCWangDHossenloppJM. Aluminum-containing layered double hydroxides: the thermal, mechanical, and fire properties of (nano)composites of poly(methyl methacrylate). J Mater Chem2008; 18(26): 3091–3102.
29.
DuLQuB. Structural characterization and thermal oxidation properties of LLDPE/MgAl-LDH nanocomposites. J Mater Chem2006; 16(16): 1549–1554.
30.
WangDYDasACostaFR. Synthesis of organo cobalt–aluminum layered double hydroxide via a novel single-step self-assembling method and its use as flame retardant nanofiller in PP. Langmuir2010; 26(17): 14162–14169.
31.
HummersWSOffemanRE. Preparation of graphitic oxide. J Am Chem Sci1958; 80(6): 1339–1339.
32.
HuangSZhuGNZhangC. Immobilization of Co–Al layered double hydroxides on graphene oxide nanosheets: growth mechanism and supercapacitor studies. ACS Appl Mater Interfaces2012; 4(4): 2242–2249.
33.
JeongHKLeeYPLahayeRJWE. Evidence of graphitic AB stacking order of graphite oxides. J Am Chem Sci2008; 130(4): 1362–1366.
34.
ZhangWMaCFangJ. Asymmetric electrochemical capacitors with high energy and power density based on graphene/CoAl-LDH and activated carbon electrodes. RSC Adv2013; 3(7): 2483–2490.
35.
WangXZhouSXingW. Self-assembly of Ni–Fe layered double hydroxide/graphene hybrids for reducing fire hazard in epoxy composites. J Mater Chem A2013; 1(13): 4383–4390.
36.
WangDYLeuteritzAWagenknechtU. Self-assembling organomodified Co/Al based layered double hydroxides (LDH) via one-step route. Nonferrous Met Soc2009; 19(6): 1479–1482.
37.
MarcanoDCKosynkinDVBerlinJM. Improved synthesis of graphene oxide. ACS Nano2010; 4(8): 4806–4814.
38.
Mar BernalMPardo-AlonsoSSolorzanoE. Effect of carbon nanofillers on flexible polyurethane foaming from a chemical and physical perspective. RSC Adv2014; 4(40): 20761–20768.
39.
SongSAChungYSKimSS. The mechanical and thermal characteristics of phenolic foams reinforced with carbon nanoparticles. Compos Sci Technol2014; 103: 85–93.
40.
HuXChengWNieW. Flame retardant, thermal, and mechanical properties of glass fiber/nanoclay reinforced phenol-urea-formaldehyde foam. Polym Compos2016; 37(8): 2323–2332.
41.
ZhouJYaoZChenY. Fabrication and mechanical properties of phenolic foam reinforced with graphene oxide. Polym Compos2014; 35(3): 581–586.
42.
YangHWangXYuB. A novel polyurethane prepolymer as toughening agent: preparation, characterization, and its influence on mechanical and flame retardant properties of phenolic foam. J Appl Polym Sci2013; 128(5): 2720–2728.
