Abstract
In order to improve the interfacial compatibility between the fibers and epoxy resins, polyimide (PI) fibers were modified using oxygen plasma with various treatment powers. The properties of PI fibers before and after surface modification were comparatively characterized according to their chemical composition, surface morphology, surface free energy, single filament tensile strength, and interfacial shear strength (IFSS). Most of the fiber properties, including the ratio of oxygen to nitrogen, oxygen concentration, surface free energy, and IFSS firstly increased with the plasma power, and then decreased when the plasma power was higher than 120 W. With a plasma power of 120 W, the oxygen concentration and the ratio of oxygen to carbon atoms (O/C) was 26% (22% for untreated fiber) and 0.38 (0.28 for untreated fiber), respectively. Meanwhile, the values of surface free energy and IFSS were 89% and 30% higher than those for untreated fiber, respectively. Furthermore, the values of single filament tensile strength for modified fibers were only 2.3% lower than those for pristine one. These results indicated that the compatibility between PI fibers and epoxy resins was greatly improved without compromising mechanical properties.
Get full access to this article
View all access options for this article.