In this present work, porous mullites (PM0–5) were synthesized through a template-assisted method using various weight percentages of pluronic (P-123). PM5 obtained using 10 wt% of P-123 was found to show maximum porosity (3.8 Å) and low dielectric constant value (2.4). PM5 was functionalized using glycidyl-terminated silane and denoted as FPM and various weight percentages of FPM were reinforced with polybenzoxazine (PBZ) matrix in order to develop FPM/PBZ nanocomposites. The thermal studies indicate that 1.5 wt% of FPM/PBZ nanocomposite showed improved thermal stability with 34% char yield at 800°C and 162°C as glass transition temperature. It also exhibits low dielectric constant (2.6) than that of the neat PBZ matrix and other FPM/PBZ nanocomposites. The microscopic analysis confirms the homogenous dispersion of FPM into the PBZ polymer that has a porous morphology. The results suggest that the as-synthesized mesoporous mullite with low dielectric constant (k), synthesized via template-assisted method can be used as a reinforcement to decrease the dielectric constant of polymeric material, which is of industrial significance.
SchneiderHSchreuerJHildmannB. Structure and properties of mullite—A review. J Eur Ceram Soc2008; 28: 329–344.
3.
DingSZengYPJiangD. Fabrication of mullite ceramics with ultrahigh porosity by gel freeze drying. J Am Ceram Soc2007; 90(7): 2276–2279.
4.
EbrahimpourODuboisCChaoukiJ. Fabrication of mullite-bonded porous SiC ceramics via a sol–gel assisted in situ reaction bonding. J Eur Ceram Soc2014; 34: 237–247.
5.
YangFLiCLinY. Effects of sintering temperature on properties of porous mullite/corundum ceramics. Mater Lett2012; 73: 36–39.
6.
BareaROsendiMIMiranzoP. Fabrication of highly porous mullite materials. J Am Ceram Soc2005; 88(3): 777–779.
7.
LucianaCSTiagoCMBLianaRA. Review of mullite synthesis routes by sol–gel method. J Sol-Gel Sci Technol2010; 55: 111–125.
8.
MarianoTHRodrigoMAndreaCM. Porous mullite ceramics formed by direct consolidation using native and granular cold-water-soluble starches. J Am Ceram Soc2014; 97(4): 1074–1082.
9.
MiaoX. Porous mullite ceramics from natural topaz. Mater Lett1999; 38: 167–172.
10.
GarciaEOsendiMIMiranzoP. Porous mullite templated from hard mullite beads. J Eur Ceram Soc2011; 31: 1397–1403.
11.
YangZYuJLiC. Preparation of textured porous Al2O3 ceramics by slip casting in a strong magnetic field and its mechanical properties. Cryst Res Technol2015; 50(8): 645–653.
12.
XueWHuangYXieZ. Al2O3 ceramics with well-oriented and hexagonally ordered pores: the formation of microstructures and the control of properties. J Eur Ceram Soc2012; 32: 3151–3159.
13.
CuiXTangSZhouH. Mesoporous alumina materials synthesized in different gel templates. Mater Lett2013; 98: 116–119.
14.
KohYHLeeEJYoonBH. Effect of polystyrene addition on freeze casting of ceramic/camphene slurry for ultra-high porosity ceramics with aligned pore channels. J Am Ceram Soc2006; 89(12): 3646–3653.
15.
HaJ-HAhmadRSongI-H. A novel method of coating a particle-stabilized alumina foam on a porous alumina substrate. Mater Lett2012; 88: 40–42.
16.
KrukMJaroniecMKoCH. Characterization of the porous structure of SBA-15. Chem Mater2000; 12: 1961–1968.
17.
ZhangFMengYGuD. A facile aqueous route to synthesize highly ordered mesoporous polymers and carbon frameworks with ia3hd bicontinuous cubic structure. J Am Chem Soc2005; 127: 13508–13509.
18.
KumarDSchumacherKHohenescheCD. Mcm-41, mcm-48 and related mesoporous adsorbents: their synthesis and characterisation. Colloids Surf A Physicochem Eng Aspects2001; 187: 109–116.
19.
MoisesCAVadimGV. Ordered meso- and macroporous binary and mixed metal oxides. Eur J Inorg Chem2005; 2005: 27–43.
20.
YangPZhaoDDavidMI. Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks. Lett Nat1998; 396: 152–155.
21.
WangGZhangLDaiH. P123-assisted hydrothermal synthesis and characterization of rectangular parallelepiped and hexagonal prism single-crystalline MgO with three-dimensional wormhole like mesopores. Inorg Chem2008; 47: 4015–4022.
22.
IshidaHRimdusitS. Very high thermal conductivity obtained by boron nitride filled polybenzoxazine. Thermochim Acta1998; 320: 177–186.
23.
TakeichiTKawauchiTTarekAG. High performance polybenzoxazines as a novel type of phenolic resin. Soc Polym Sci2008; 40(12): 1121–1131.
24.
GhoshNNKiskanBYagciY. Polybenzoxazines—new high performance thermosetting resins: synthesis and properties. Prog Polym Sci2007; 32: 1344–1391.
25.
DueramaeIJubsilpCTakeichiT. High thermal and mechanical properties enhancement obtained in highly filled polybenzoxazine nanocomposites with fumed silica. Composites B2014; 56: 197–206.
26.
RimdusitSTiptipakornSJubsilpC. Polybenzoxazine alloys and blends: some unique properties and applications. React Funct Polym2013; 73: 369–380.
27.
JubsilpCTakeichiTRimdusitS. Property enhancement of polybenzoxazine modified with dianhydride. Polym Degrad Stabil2011; 96: 1047–1053.
28.
PrabunathanPSethuramanKAlagarM. Development of bio-based F-SBA-15 reinforced epoxy nanocomposites for low-k dielectric applications. High Perform Polym2014; 26: 283–289.
29.
NingXChinIH. Phenolic materials via ring-opening polymerization: synthesis and characterization of bisphenol-A based benzoxazines and their polymers. J Polym Sci A Polym Chem1994; 32: 1121.
30.
XuGMaYCuiH. Preparation of porous mullite–corundum ceramics with controlled pore size using bioactive yeast as pore-forming agent. Mater Lett2014; 116: 349–352.
31.
YangFLiCLinY. Effects of sintering temperature on properties of porous mullite/corundum ceramics. Mater Lett2012; 73: 36–39.
32.
SheJHOhjiT. Fabrication and characterization of highly porous mullite ceramics. Mater Chem Phys2003; 80: 610–614.
33.
DingSZengYPJiangD. Fabrication of mullite ceramics with ultrahigh porosity by gel freeze drying. J Am Ceram Soc2007; 90(7): 2276–2279.
XuGMaYCuiH. Preparation of porous mullite–corundum ceramics with controlled pore size using bioactive yeast as pore-forming agent. Mater Lett2014; 116: 349–352.
37.
TalouMHMorenoRCamerucciAM. Porous mullite ceramics formed by direct consolidation using native and granular cold-water-soluble starches. J Am Ceram Soc2014; 97(4): 1074–1082.
38.
XomeritakisGBraunbarthCMSmarslyB. Aerosol-assisted deposition of surfactant-templated mesoporous silica membranes on porous ceramic supports. Micropor Mesopor Mater2003; 66: 91–101.
39.
KanimozhiKDevarajuSVengatesanMR. Studies on synthesis and characterization of surface-modified mullite fibre-reinforced epoxy nanocomposites. High Perform Polym2013; 25(6): 658–667.
40.
SunYYZhangZQWongCP. Influence of interphase and moisture on the dielectric spectroscopy of epoxy/silica composites. Polymer2005; 46: 2297–2305.
41.
RevathiRPrabunathanPKumarM. Studies on graphene oxide–reinforced polybenzoxazine nanocomposites. High Perform Polym. Epub ahead of print 11 May 2015. DOI: 10.1177/0954008315585013.
42.
RevathiRPrabunathanPKumarM. Optical and thermomechanical behavior of benzoxazine functionalized zno reinforced polybenzoxazine nanocomposites. Polym Compos. Epub ahead of print 13 August 2015. DOI 10.1002/pc.23758.
43.
DevarajuSPrabunathanPSelviM. Low dielectric and low surface free energy flexible linear aliphatic alkoxy core bridged bisphenol cyanate ester based POSS nanocomposites. Polym Chem2013; 1(19): 1–10.
44.
DevarajuSVengatesanMRAshok KumarA. Polybenzoxazine–silica (PBZ–SiO2) hybrid nanocomposites through in situ sol–gel method. J Sol-Gel Sci Technol2011; 60: 33–40.
45.
Kanimozhi1KPrabunathanPSelvarajV. Bio-based silica-reinforced caprolactam-toughened epoxy nanocomposites. High Perform Polym. Epub ahead of print 30 March 2015. DOI: 10.1177/0954008315576780.
