In this study, the nanocomposites based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3,4)HB) and three kinds of aluminum-containing layered double hydroxides (LDHs) were prepared via melting intercalation. The thermal stability, thermal combustion and thermomechanical properties for these systems were systematically investigated. Both x-ray diffractometry and transmission electron microscopy analyses for P(3,4)HB/LDH system confirm that P(3,4)HB/magnesium–aluminum (MgAl) system has a main exfoliated microstructure and P(3,4)HB/ZnAl system has an intercalated or partially exfoliated microstructure, while P(3,4)HB/NiAl system has an intercalated or phase separated microstructure. The microscale combustion calorimetry results show that the peak of heat release rate for P(3,4)HB/LDH systems, as an important parameter for the assessment of fire hazard of materials, is significantly reduced with the addition of LDHs. The storage modulus of three systems with small amount of LDHs measured by dynamic mechanical analysis is remarkably enhanced. The increment in the storage modulus of P(3,4)HB/LDH nanocomposites will increase with the increase in the atomic number of M2+ of LDHs.
CongCBZhangSYXuRWLuWCYuDS. The influence of 4HB content on the properties of poly(3-hydroxylbutyrate-co-4-hydroxylbutyrate) based on melt molded sheets. J Appl Polym Sci2008; 109: 1962–1967.
5.
PhilipSKeshavarzTRoyI. Polyhydroxyalkanoates: biodegradable polymers with a range of applications. J Chem Technol Biotechnol2007; 82: 233–247.
6.
ChenGQWuQ. The application of polyhydroxyalkanoates as tissue engineering materials. Biomaterials2005; 26: 6565–6578.
7.
KiliarisPPapaspyridesCD. Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy. Prog Polym Sci2010; 35: 902–958.
RaySSBousminaM. Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci2005; 50: 962–1079.
10.
MelinteVBuruianaTMihaiABuruianaEC. Carboxylic polyurethane/organoclay nanocomposites and their properties. High Perform Polym2011; 23: 238–247.
11.
XingWYSongLLvXQWangXHuY. Preparation, combustion and thermal behaviors of UV-cured coatings containing organically modified alpha-ZrP. J Polym Res2011; 18: 179–185.
12.
Manzi-NshutiCWangDYHossenloppJMWilkieCA. Aluminum-containing layered double hydroxides: the thermal, mechanical, and fire properties of (nano)composites of poly- (methyl methacrylate). J Mater Chem2008; 18: 3091–3102.
13.
DuLCQuBJ. Structural characterization and thermal oxidation properties of LLDPE/MgAl-LDH nanocomposites. J Mater Chem2006; 16: 1549–1554.
14.
NyamboCSongtipyaPManiasEJimenez-GascocMMWilkieCA. Effect of MgAl-layered double hydroxide exchanged with linear alkyl carboxylates on fire-retardancy of PMMA and PS. J Mater Chem2008; 18: 4827–4838.
15.
ZubiturMMugicaAAreizagaJCortázarM.Morphology and thermal properties relationship in poly(p-dioxanone)/layered double hydroxides nanocomposites. Colloid Polym Sci2010; 288: 809–818.
16.
SaberO. Improvement of optical properties and thermal stability of poly vinyl alcohol using salicylic acid confined in nanohybrid material. Polym Bull2012; 68: 209–222.
17.
MiyataSOkadaA. Synthesis of hydrotalcite-like compounds and their physicochemical properties-systems Mg2+-Al3+-SO42− and Mg2+-Al3+-CrO42–. Clays Clay Miner1977; 25: 14–18.
18.
ChitrakarRMakitaYSonodaAHirotsuT. Synthesis of a novel layered double hydroxides [MgAl4(OH)12](Cl)2·2.4H2O and its anion-exchange properties. J Hazard Mater2011; 185: 1435–1439.
19.
ZhaoCXLiuYWangDYWangDLWangYZ. Synergistic effect of ammonium polyphosphate and layered double hydroxide on flame retardant properties of poly(vinyl alcohol). Polym Degrad Stabil2008; 93: 1323–1331.
20.
ZhangMDingPQuBJ. Thermal, and mechanical properties of intumescent flame retardant PP/LDH nanocomposites with different divalent cations. Polym Compos2009; 30: 1000–1006.
21.
WuGDWangXLLiJPZhaoNWeiWSunYH. A new route to synthesis of sulphonato-salen-chromium(III) hydrotalcites: highly selective catalysts for oxidation of benzyl alcohol to benzaldehyde. Catal Today2008; 131: 402–407.
22.
KameshimaaYSasakiaHIsobeaTNakajimaaAOkadaK. Synthesis of composites of sodium oleate/Mg–Al-ascorbic acid-layered double hydroxides for drug delivery applications. Int J Pharm2009; 381: 34–39.
23.
HsuSFWuTMLiaoCS. Isothermal crystallization kinetics of poly(3-hydroxybutyrate)/layered double hydroxide nanocomposites. J Polym Sci Part B: Polym Phys2006; 44: 3337–3347.
24.
WuTMHsuSFShihYFLiaoCS. Thermal degradation kinetics of biodegradable poly(3-hydroxybutyrate)/layered double hydroxide nanocomposites. J Polym Sci Part B: Polym Phys2008; 46: 1207–1213.
25.
HsuSFWuTMLiaoCS. Nonisothermal crystallization behavior and crystalline structure of poly(3-hydroxybutyrate)/layered double hydroxide nanocomposites. J Polym Sci Part B: Polym Phys2007; 45: 995–1002.
26.
ZhangRHuangHYangWXiaoXFHuY. Preparation and characterization of bio-nanocomposites based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) and CoAl layered double hydroxide using melt intercalation. Compos A2012; 43: 547–552.
27.
KotalMKuilaTSrivastavaSKBhowmickAK. Synthesis and characterization of polyurethane/Mg-Al layered double hydroxide nanocomposites. J Appl Polym Sci2009; 114: 2691–2699.
28.
WangYFGaoHZ. Compositional and structural control on anion sorption capability of layered double hydroxides (LDHs). J Colloid Interface Sci2006; 301: 19–26.
29.
IslamMPatelR. Synthesis and physicochemical characterization of Zn/Al chloride layered double hydroxide and evaluation of its nitrate removal efficiency. Desalination2010; 256: 120–128.
30.
QuanHZhangBQZhaoQYuenRKKLiRKY. Facile preparation and thermal degradation studies of graphite nanoplatelets (GNPs) filled thermoplastic polyurethane (TPU) nanocomposites. Compos A2009; 40: 1506–1513.
31.
PradhanSCostaFRWagenknechtUJehnichenDBhowmickAKHeinrichG. Elastomer/LDH nanocomposites: synthesis and studies on nanoparticle dispersion, mechanical properties and interfacial adhesion. Eur Polym J2008; 44: 3122–3132.
32.
WangXHuYSongLXuanSYXingWYBaiZM. Flame retardancy and thermal degradation of intumescent flame retardant poly(lactic acid)/starch biocomposites. Ind Eng Chem Res2011; 50: 713–720.
