Fabrication and Properties of Polyamide-6,6-functionalized Carboxylic Multi-walled Carbon Nanotube Composite Fibers

Abstract

Polyamide-6,6 (PA66)-functionalized carboxylic multi-walled carbon nanotubes (CMWNTs) were fabricated by in situ polymerization. The composite was melt-spun into fibers. The structures and properties of the PA66-functionalized multi-walled carbon nanotubes (PFNTs) were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), etc. CMWNTs were seen to be uniformly scattered throughout the matrix. Aggregation of CMWNTs was not observed in the fracture surface of the composite fiber. The CMWNTs were not completely pulled out from the matrix, implying strong interactions as a result of functionalization. The incorporation of CMWNTs into PA66 did not have a significant effect on the thermal decomposition temperature of the composites. The effect of CMWNT was on the crystallographic form of the composite. The grain sizes of crystals increased as the CMWNT content increased. The storage modulus significantly increased with the increase in CMWNT content. The tensile strength and modulus of the fibers were significantly improved whereas the strain on the fiber decreased with the increased content of CMWNT.

Keywords

Carbon nanotubes functionalization polymerization fiber mechanical properties

Get full access to this article

View all access options for this article.

References

Iijima, S. (1991). Helical Microtubules of Graphitic Carbon, Nature, 354: 56-58.

Ruoff, R.S. and Lorents, D.C. (1995). Mechanical and Thermal Properties of Carbon Nanotubes, Carbon, 33: 925-930.

Wong, E.W. and Sheehan, P.E. (1997). Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes, Science, 277: 1971-1975.

Xie, X.L. , Mai, Y.W. and Zhou, X.P. (2005). Dispersion and Alignment of Carbon Nanotubes in Polymer Matrix: A Review, Mater. Sci. Engng, R49: 89-112.

Hill, D.E. , Lin, Y. , Rao , A.M. , Allard, L.F. and Sun , Y.P. (2002). Functionalization of Carbon Nanotubes with Polystyrene, Macromolecules , 35: 9466-9471.

Gao, J.B. , Itkis, M.E. , Yu , A.P. , Bekyarova, E. , Zhao, B. and Haddon, R.C. (2005). Continuous Spinning of a Single-walled Carbon Nanotube-Nylon Composite Fiber , J. Am. Chem. Soc., 127: 3847-3854.

Meng, Q.J. , Zhang, X.X. and Bai , S.H. (2007). Poly (1, 3-propylene glycol- hexanedioic acid) Grafted Hydroxyl Multi-wall Carbon Nanotube, J. Appl. Polym. Sci., 106: 2018-2024.

Kumar, S. , Dang, T.D. , Arnold, F.E. , Bhattacharyya, A.R. , Min, B.G. , Zhang, X.F. , Vaia, R.A. , Park, C. , Adams, W.W. , Hauge, R.H. , Smalley, R.E. , Ramesh, S. and Willis, P.A. ( 2002). Synthesis, Structure, and Properties of PBO/SWNT Composites , Macromolecules, 35: 9039-9043.

Kim, H.S. , Jin, H.J. , Myung, S.J. , Kang, M.S. and Chin, I.J. (2006). Carbon Nanotube-adsorbed Electro-spun Nanofibrous Membranes of Nylon 6, Macromolec . Rapid Commun., 27: 146-151.

10.

Phang, I.Y. , Ma, J.H. , Shen, L. , Liu , T.X. and Zhang, W.D. (2006). Crystallization and Melting Behavior of Multi-walled Carbon Nanotube-reinforced Nylon-6 Composites, Polym. Intl, 55: 71-79.

11.

Sengupta, R. , Ganguly, A. , Sabharwal , S. , Chaki, T.K. and Bhowmick, A.K. (2007). MWNT Reinforced Polyamide-66 films: Preparation, Characterization and Properties , J. Mater. Sci., 42: 923-934.

12.

Liu, J. , Rinzler, A.G. , Dai , HJ , Hafner, J.H. , Bradley, R.K. , Boul, P.J. , Lu , A. , Iverson, T. , Shelimov, K. , Huffman, C.B. , Rodriguez-Macias , F. , Shon, Y.S. , Lee , T.R. , Colbert, D.T. and Smalley, R.E. ( 1998). Fullerene Pipes, Science, 280: 1253-1256.

13.

Marshall, M.W. , Popa-Nita, S. and Shapter, J.G. (2006). Measurement of Functionalized Carbon Nanotube Carboxylic Acid Groups using a Simple Chemical Process, Carbon, 44: 1137-1141.

14.

Qiu, J. , Wang, G.J. , Qu , Z.H. and Chang, L. (2006). Relationship between Oxidation Treatment Method and Carboxylic Group Content on the Surface of MWCNTs, New Carbon Material, 21: 269-272 (in Chinese).

15.

Kong, H. , Gao, C. and Yan, D.Y. ( 2004). Controlled Functionalization of Multi-walled Carbon Nanotubes by in situ Atom Transfer Radical Polymerization, J. Am. Chem. Soc., 126: 412-413.

16.

Baskaran, D. , Mays, J.W. and Bratcher, M.S. ( 2005). Polymer Adsorption in the Grafting Reactions of Hydroxyl Terminal Polymers with Multi-walled Carbon Nanotubes, Polymer , 46: 5050-5057.

17.

Baskaran, D. , Mays, J.W. and Bratcher, M.S. ( 2005). Noncovalent And Nonspecific Molecular Interactions Of Polymers With Multiwalled Carbon Nanotubes, Chem. Mater., 17: 3389-3397.

18.

Min, B.G. , Sreekumar, T.V. , Uchida, T. and Kumar, S. (2005). Oxidative Stabilization of PAN/SWNT Composite Fiber, Carbon , 43: 599-604.