Effect of Fiber Material on the Energy Absorption Behavior of Thermoplastic Composite Tubes

Abstract

The primary objective of this work is to identify the effect of fiber material on the energy-absorption characteristics of thermoplastic composite tubes. PEEK matrix composite tubes reinforced with AS4 carbon fiber, IM7 carbon fiber, and S2 glass fiber have been investigated. Seven fiber orientations (0) were used: unidirectional fibers parallel (0°) to the axis of the tube, ±5°, ±10°, ±15°, ±20°, ±25° and ±30°. A ±45° chamfer was ground onto one end of each specimen to initiate progressive crushing. The ±30° AS4/PEEK, ±30° IM7/PEEK, and ±25° and ±30° S2/PEEK tubes failed catastrophically, whereas all the other tube specimens crushed progressively in splaying mode. The energy absorption capability of all three types of tubes varied with the fiber orientation. The carbon-fiber-reinforced tubes displayed 20% higher specific energy absorption capability than the glass-fiber-reinforced tubes. Among the carbon-fiber-reinforced tubes, for intermediate fiber orientations, the AS4/PEEK tubes absorbed slightly higher energy than the IM7/PEEK tubes. Efforts have been made to relate the energy absorption capability to the failure processes in the crush zone.

Keywords

composite materials tubes energy absorption crushing performance glass fibers AS4 carbon fibers IM7 carbon fibers PEEK

References

1. Hull, D. 1991. "A Unified Approach to Progressive Crushing in Fiber Reinforced Composite Tubes," Composites Science and Technology, 40:377-421.

2. Hull, D. 1988. "Energy Absorbing Composite Structures' Science and Technology Review, University of Wales, 3:23-30.

3. Ramakrishna, S. and D. Hull . 1993. "Energy Absorption Capability of Epoxy Composite Tubes with Knitted Carbon Fiber Fabric Reinforcement," Composites Science and Technology, 49:349-356.

4. Sigalas, J. , M. Kumosa and D. Hull . 1991. "Trigger Mechanisms in Energy Absorbing Glass Cloth/Epoxy Tubes," Composites Science and Technology, 40:265-287.

5. Thronton, P. H. and P. J. Edwards . 1982. "Energy Absorption in Composite Tubes'" J. Composite Materials, 16:521-545.

6. Schmuesser, D. W. and L. E. Wickliffe . 1987. "Impact Energy Absorption of Continuous Fiber Composite Tubes;" J. Engineering Materials and Technology, 109:72-77.

7. Farley, G. L. 1983. "Energy Absorption of Composite Materials," J. Composite Materials, 17:267-279.

8. Farley, G. L. 1986. "Effect of Fiber and Matrix Strain on the Energy Absorption of Composite Materials;" Composite Materials, 20:322-334.

9. Farley, G. L. 1986. "Effect of Specimen Geometry on the Energy Absorption Capability of Composite Materials;" J. Composite Materials, 20:390-400.

10.

10. Farley, G. L. 1987. "Energy Absorption of Composite Materials and Structures;" in Proceedings of the 43rd American Helicopter Society Annual Forum, St. Louis, pp. 613-627.

11.

11. Farley, G. L. 1987. "Energy Absorption in Composite Materials for Crashworthy Structures," in Proceedings of ICCM-VI, F. L. Matthews , N. C. R. Buskell , J. M. Hodgkinson and J. Mortan , eds., Elsevier Science Publishers, London, pp. 3.57-3.66.

12.

12. Hull, D. 1983. "Axial Crushing of Fiber Reinforced Composite Tubes;" Structural Crash Worthiness, N. Jones and T. Wierzbicki , eds., Butterworths, London, pp. 118-135.

13.

13. Hamada, H. , S. Ramakrishna , M. Nakamura and Z. Maekawa . 1994. "Energy Absorption Behavior of Hybrid Composite Tubes;" in Proceedings of 10th ASM/ESD Advanced Composites Conference, Dearborn, MI: November 7-10, pp. 511-522.

14.

14. Thornton, P. H. and R. A. Jeryan . 1988. "Crash Energy Management in Composite Automotive Structures;" J. Impact Engineering, 7:167-180.

15.

15. Thornton, P. H. 1990. "The Crush Behavior of Pultruded Tubes at High Strain Rates," J. Composite Materials, 24:594-615.

16.

16. Hamada, H. , J. C. Coppola , D. Hull , Z. Maekawa and H. Sato . 1992. "Comparison of Energy Absorption of Carbon/Epoxy and Carbon/PEEK Composite Tubes;" Composites, 23:245-252.

17.

17. Ramakrishna, S. , H. Hamada , H. Sato and Z. Maekawa . 1995. "Energy Absorption Behavior of Carbon Fiber Reinforced Thermoplastic Composite Tubes," J. Thermoplastic Composite Materials, 80:323-344.

18.

18. Hamada, H. and S. Ramakrishna . "Effect of Fiber Orientation on the Energy Absorption Capability of Carbon Fiber/PEEK Composite Tubes;" J. Composite Materials (in press).

19.

19. Hamada, H. and S. Ramakrishna . In press. "Crushing Mechanism of Carbon Fiber/PEEK Composite Tubes;" Composites.

20.

20. Chou, I. , I. Kimpara , K. Kageyama and I. Ohsawa . 1993. "Effect of Fiber Orientation on Mode I and Mode 11 Interlaminar Fracture Toughness of CFRP Laminates," J. Japan Society for Composite Materials, 19(3):109-119.

21.

21. Rubbrecht, Ph . and I. Verpoest . 1993. "The Development of Two Test Methods to Determine the Mode I and Mode II Fracture Toughness for Varying Fiber Orientations at the Interface," in Proceedings of 38th SAMPE Symposium, California, pp. 875-887.

22.

22. 1992. Thermoplastic Composite Materials, ICI Composites Inc.

23.

23. Von Bradsky, V. , R. A. Chivers , R. A. Crick and R. M. Turner . 1993. "Interlaninar Fracture Toughness of a Range of Continuous Fiber PEEK Composites," Composites Science and Technology, 47:75-81.