An experimental investigation of a novel approach for manufacturing of thermoplastic matrix composites, is described. The technique is based on using laser energy as the focused heat source to melt the matrix material for subsequent consolidation, and appears to be particularly suited for thermoplastic filament winding operations. An experimental set up is defined to produce multi ply rings, and the feasibility of this technique is demon strated by discussing several samples that were produced using Ryton AC40-60 prepreg tapes. The quality of consolidation is examined through cross-sectional micrographs.
References
1.
Benatar, A. and T.G. Gutowski. "Methods for Fusion Bonding Thermoplastic Composites," SAMPE Quarterly, 18(1):34-41 (1986).
2.
Gruber, M.B. "Thermoplastic Tape Laydown and Consolidation," SME Technical Paper EM86-905 (1986).
3.
Gruber, M.B.Private communication (1987).
4.
Watson, T.Private communication (1987).
5.
Tung, C.M., D.S. Gnanamuthu, R.J. Moores and C.J. Leung. "Effect of Laser Radiation on the Rapid Processing of Graphite Reinforced Composites," 32nd International SAMPE Symposium and Exhibition, Advanced Materials Technology , 32:476-483 (1987).
6.
Biggs, L. "Laser Processing of Polyetheretherketone," Senior Thesis, University of Delaware, Newark ( 1987).
7.
Smith, R. "Laser-Assisted Tape Laying of Thermoplastic Matrix Composites," Senior Thesis, Department of Mechanical Engineering, University of Delaware, Newark, Delaware (1986 ).
8.
Beyeler, E.P. and S.I. Güçeri. "Thermal Analysis of Laser-Assisted Thermoplastic-Matrix Composite Tape Consolidation," ASME Journal of Heat Transfer , in print (1988).
9.
Beyeler, E.P. "Melting/Solidification in Processing and Applications to Thermoplastic Composite Manufacturing," Ph.D. dissertation, University of Delaware, Newark, Delaware1971 6 (1987).
10.
Gilmore, S.D. "Processing Science for Thermoplastic Matrix Composites," Ph.D. Thesis, in progress, Department of Mechanical Engineering, University of Delaware, Newark, Delaware (1988).
11.
Sottos, N.R. "Mechanical Characterization and the Thermal Stresses in Fiber-Matrix Interface Regions," Ph.D. Thesis, in progress, Department of Mechanical Engineering, University of Delaware, Newark, Delaware (1988).
12.
Agarwal, V. "Diffusion Across Interfaces During the Bonding of Thermoplastic-Matrix Composites," Ph.D. Thesis, in progress, Chemical Engineering Department, University of Delaware, Newark, Delaware (1988).
