Joining different material types, like metal and thermoplastic fiber reinforced polymer composites (TP-FRPC), offers a large potential for innovative light weight applications. This kind of bonding depends on mechanical, physical, and chemical interactions and is, therefore influenced by joining partner surface treatments. This study describes adhesion models and the effect of surface treatments of AlMg3-CF/PA66-joints. Joining by means of induction heating is an appropriate joining technology for the bonding of metal/TP-FRPC as it is utilized by a rapid heat generation. The characterization of the bonding mechanisms and the influence of the surface treatments are presented by single-lap joints and by microscopic analyses.
Lohse, H. ( 2006). Joining Plastics by Adhesive Bonding in Automotive Engineering , JEC Composite Magazine, 27: 46-49.
2.
Deinzer, G., Wetter, H., Schmid, G. and Bangel, M. ( 2006). Fügetechnologien zur Integration von FVK-Bauteilen in Metallische Karosseriestrukturen, In: Proceedings: Plastics in Automotive Engineering, VDI Kunststofftechnik, Mannheim Germany, pp. 275-292.
3.
Moser, L., Mitschang, P. and Schlarb, A. ( 2008). Induction Welding of Polymer Composites Using Robotic Techniques, SAMPE Journal, 44(5): 43-49.
4.
Velthuis, R. ( 2007). Induction Welding of Fiber Reinforced Thermoplastic Polymer Composites to Metal, PhD thesis, IVW-Schriftenreihe, Vol. 75, IVW, Kaiserslautern.
5.
McKnight, S.H., McBride, M.G. and Gillespie, J.W. ( 1993). Joining of Polypropylene and Aluminum: Evaluation of Environmental Durability, In: 25th International SAMPE Technical Conference, Covina, pp. 26-28.
6.
Marinelli, J.M. and Lambing , C.L.T. (1994). Advancement in Welding Technology for Composite-to-Metallic Joints, Journal of Advanced Materials, April: 20-27.
7.
Skiles, J.A. and Wightman, J.P. (1988). Heat-resistant Thermoplastic/Chromic Acid Anodized Ti-6Al-4V Single Lap Bond Evaluation, International Journal of Adhesion and Adhesives, 8(4): 201-206.
8.
Progar, D.J. and St. Clair, T.L. (1986). Evaluation of a Novel Thermoplastic Polyimide for Bonding Titanium, International Journal of Adhesion and Adhesives, 6(1): 25-30.
9.
Mayhew, R.T. and Kohli, D.K. (1996). Development of High Temperature Service Polyimide Based Adhesives for Titanium and Composite Bonding Applications, In: 41st International SAMPE Symposium , Anaheim, CA, Vol. 41, pp. 1026-1034.
10.
Chan-Park, M.B., Ngew, H.S., Yip , D.C.F., Er , C.J. and Zee , S.W. (2001). Heating Methods for Bonding Thermoplastics to Aluminum Alloy, Journal of Advanced Materials, 33(4): 52-61.
11.
Riedler, M. ( 2006). Untersuchung des Einflusses der Prozessparameter auf das Wärmeimpulsschweißen von PEEK und Stahl, Institut für Verbundwerkstoffe GmbH, Technical Report, Report Number 06-013.
12.
Anagreh, N. and Dorn, L. (2002). Klebflächenvorbehandlung Von Aluminiumoberflächen Mit SIP-Haftvermittler, Materialwissenschaft und Werkstofftech, 33: 657-666.
13.
Jansen, I., Simon, F., Häßler, R. and Kleinert, H. ( 2001). Aluminum Treatment and the Properties of Adhesively Bonded Joints, Macromolecular Symposium, 164: 465-478.
14.
Velthuis, R. , Kötter, P., Geiß , P., Mitschang, P. and Schlarb, A.K. (2007). Lightweight Structures Made of Metal and Fiber-reinforced Polymers, Kunststoffe International , 11(97): 22-24.
15.
Bischof, C. (1993). ND-Plasmatechnik im Umfeld der Haftungsproblematik bei Metall-Polymer-Verbunden, Materialwissenschaft und Werkstofftech, 24: 33-41.
16.
Möller, S. (1998). Phosphorsäure-Haftvermittler - Ein Beitrag zur Adhäsion an Aluminiumoberflächen, PhD thesis. Bielefeld.
17.
Brockmann, W. (1989). Durability of Adhesion Between Metals and Polymers, Journal of Adhäsion, 29: 53-61.
18.
Brockmann, W. and Hennemann, O. (1989). Eine andere Modellvorstellung über die Adhäsion in Polymer/Metall-Verbunden , Adhäsion, 11: 33-35.
19.
Brockmann, W. and Emrich, S. (2002). Wie Lange Halten Vorbehandelte Aluminiumklebungen? Teil 1, Adhäsion , 5: 34-39.
20.
Brockmann, W. and Emrich, S. (2002). Wie Lange Halten Vorbehandelte Aluminiumklebungen? Teil 2, Adhäsion , 7-8: 36-41.
21.
Neeb, T. ( 1999). Adhäsionsmechanismen an Mechanisch Vorbehandelten Metalloberflächen, PhD thesis. Kaiserslautern.
22.
Bauer, A. ( 1994). Eigenschaften im Grenzbereich, Kleben & Dichten, Adhäsion, 38(6): 29-32.
23.
Rudnev, V., Loveless, D., Cook, R. and Black, M. ( 2003). Handbook of Induction Heating, Dekker , New York and Basel .
24.
Mitschang, P. , Rudolf, R. and Neitzel, M. (2002). Continuous Induction Welding Process, Modelling and Realisation, Journal of Thermoplastic Composite Materials, 15(2): 127-153.
25.
Emrich, S. ( 2003). Untersuchungen zum Einfluss von Oberflächenchemie und -morphologie auf die Langzeitbeständigkeit geklebter Aluminiumverbunde , PhD thesis, Kaiserslautern.
26.
Kwok, D.Y. and Neumann, A.W. ( 1999). Contact Angle Measurement and Contact Angle Interpretation , Advances in Colloid and Interface Science, 81: 167-249.
27.
Kinloch, A.J. ( 1987). Adhesion and Adhesives, Chapman and Hall, London.
28.
Brockmann, W., Geiß, P.L., Klingen, J. and Schröder, B. ( 2005). Klebtechnik - Klebstoffe, Anwendungen und Verfahren , Wiley-VCH Verlag GmbH, Weinheim .
29.
Kinloch, A.J. , Kodokian, G.K.A. and Watts, J.F. (1991). Relationship Between the Surface Free Energies and Surface Chemical Compositions of Thermoplastics Fibre Composites and Adhesive Joint Strengths, Journal of Materials Science Letters, 10: 815-818.
30.
Mitschang, P. and Velthuis, R. (2008). Process Parameters for Induction Welding of Metal/ Composite Joints, In: Proceedings ECCM-13, Stockholm, Sweden.
