In this study, fiber-reinforced microcellular foams are produced via injection molding and studied as a function of mold temperature as well as wood, blowing agent, and coupling agent concentrations. Birch wood fibers are added to a post-consumer recycled HDPE/PP matrix (85: 15 ratio) in proportions ranging from 0 to 40 wt% and then foamed. Maleic-anhydride-polypropylene copolymer (MAPP) is also used as a coupling agent in proportions ranging from 0 to 10 wt% of wood content. In this first part, the morphological analysis of composite foams is presented including cell roundness, cell size, skin thickness, void fraction, and fiber aspect ratio.
Matsui, H. , Kitagawa, K. , Semba, H. , Okumara, U. , Ishiaku, S. and Hamada, H. (2004). Mechanical Properties of Carbonized Bamboo Fiber Reinforced Biodegradable Polymer Composite , ANTEC Annual Technical Conference, p. 311-311 .
3.
Wrap (2004). Wood Plastic Composites Study – Technologies & UK Market Opportunities: www.wrap.org.uk.
4.
Omnexus (2005). Wood–Plastic Composites Gain Popularity: www.omnexus.com.
5.
Paladugula, J. and Shutov, F. (1998). Study of Porous Artificial Wood based on Foamable Composites of LDPE Wood Flour , ANTEC Annual Technical Conference, p. 44-44 .
6.
Li, Q. and Matuana, L.M. (2003). Foam Extrusion of High Density Polyethylene/ Wood-flour Composites using Chemical Foaming Agents , J. Appl. Polym. Sci., 88(14): 3139–3150 .
7.
Doroudiani, S. , Kortschot, M.T. and Park, C.B. (1997). Structure and Mechanical Properties Study of Foam Wood Fiber/Polyethylene Composites , ANTEC Annual Technical Conference, p. 541-541 .
8.
Rachtanapun, P. , Selke, S.M. and Matuana, L.M. (2004). Relationship between Cell Morphology and Impact Strength of Microcellular Foamed High-density Polyethylene/ Polypropylene Blends , Polym. Eng. Sci., 44(8): 1551–1560 .
9.
Guo, G. , Wang, K.H. , Park, C.B. , Kim, Y.S. and Li, G. (2004). Effects of Nano-particles on Density Reduction and Cell Morphology of Extruded MPE/Wood-fiber/ Nanocomposites , ANTEC Annual Technical Conference, p. 495-495 .
10.
Pfannschmidt, O. and Michaeli, W. (1999). Foam Injection Molding of Thermoplastics Loaded with Carbon Dioxide Prior to Processing , ANTEC Annual Technical Conference, p. 27-27 .
11.
Matuana, L.M. and Mengeloglu, F. (2001). Microcellular Foaming of Impact-modified Rigid PVC/Wood-flour Composites , J. Vinyl Add. Tech., 7(2): 67–75 .
12.
Ampacet (2005). Employing Azodicarbonamide as a Nucleating Agent in Thermpolastic Foams: www.ampacet.com.
13.
Zhang, S. , Riedl, B. and Rodrigue, D. (2005). Preparation and Characterization of Polypropylene/Wood Composite Foams , Polym. Composite, 26(6): 731–738 .
14.
Villamizar, C.A. and Han, C.D. (1978). Studies on Structural Foam Processing II. Bubble Dynamics in Foam Injection Molding , Polym. Eng. Sci., 18(9): 699–710 .
15.
Zhang, Y. , Rodrigue, D. and Aït-Kadi, A. (2003). High Density Polyethylene Foams IV: Flexural and Tensile Properties of Structural Foam , J. Appl. Polym. Sci., 90(8): 2139–2149 .
16.
Leduc, S. and Rodrigue, D. (2005). Effect of Weld Lines on the Mechanical Properties of Structural Polyethylene Foams, Proc. of PPS-21, Leipzig, paper SL 15.16.
17.
Rodrigue, D. and Leduc, S. (2003). The Influence of Injection Molding Conditions and Polymer Composition on Skin Thickness and Flexural Properties of HDPE Structural Foams, Proc. of PPS-19, Melbourne, paper 41.
18.
Wah, C.A. , Yub Choong, L. and Seng Neon, G. (2000). Effects of Titanate Coupling Agent on Rheological Behaviour, Dispersion Characteristics and Mechanical Properties of Talc Filled Polypropylene , Eur. Polym. J., 36(4): 789–801 .
19.
Jessome, A.P. (1977). Resistance et Proprietes Connexes des Bois Indigenes au Canada, Rapport Technique de Foresterie, Ottawa: 18.
