Nondestructive Evaluation of the Effects of Thermal-Mechanical Aging on IM7/K3B Stiffness

Abstract

The introduction of new, advanced composite materials into aviation systems requires a thorough understanding of the long-term effects of combined thermal and mechanical loading on these types of materials. Ultrasonic Lamb waves offer a promising method of evaluating stiffness in composite materials. To help assess the effect of aging, a suitably designed Lamb wave measurement system is being used to obtain bending and out-of-plane stiffness coefficients of composite laminates undergoing thermal-mechanical loading. In this study, a series of 16-ply graphite-fiber-reinforced amorphous thermoplastic polyimide laminates, IM7/K3B, were aged in load frames equipped with special environmental chambers. The samples were subjected to both high and low strain profiles. The bending and out-of-plane shear stiffnesses as well as time-of-flight measurements for samples that have undergone up to 4,993 fatigue cycles of combined thermal and mechanical aging are reported. The Lamb wave generated elastic stiffness results show decreases of up to 20% with extended aging.

Keywords

Lamb waves thermal-mechanical aging composites nondestructive evaluation ultrasonics

References

1. Seale, M. D. , B. T. Smith and W. H. Prosser . 1998. "Lamb Wave Assessment of Fatigue and Thermal Damage in Composites," J. Acoust. Soc. Am., 103 (5), Pt. 1:2416-2424.

2. Dayal, V. and V. K. Kinra . 1986. "Ultrasonic NDE of Composites for Transverse Cracking," in Optical Methods in Composites; Proceedings of the SEM Fall Conference on Experimental Mechanics. Bethel, CT: Society for Experimental Mechanics, Inc.

3. Tang, B. and E. G. Henneke, II . 1989. "Lamb-Wave Monitoring of Axial Stiffness Reduction of Laminated Composite Plates," Mater Eval., 47:928-934.

4. Dayal, V. , V. Iyer and V. K. Kinra . 1989. "Ultrasonic Evaluation of Microcracks in Composites," in Advances in Fracture Research; Proceedings of the Seventh International Conference on Fracture (ICF7), Vol. 5. New York: Pergamon Press.

5. Karim, M. R. , A. K. Mal and Y. Bar-Cohen . 1990. "Inversion of Leaky Lamb Wave Data by Simplex Algorithm," J. Acoust. Soc. Am., 88:482-491.

6. Mal, A. K. , M. R. Gorman and W. H. Prosser . 1992. "Material Characterization of Composite Laminates Using Low-Frequency Plate Wave Dispersion Data," in Review of Progress in Quantitative Nondestructive Evaluation, Vol. 11, edited by D. O. Thompson and D. E. Chimenti . New York: Plenum Press.

7. Sun, K. J. 1992. "Application of Guided Acoustic Waves to Delamination Detection" in Review of Progress in Quantitative Nondestructive Evaluation, Vol. 11, edited by D. O. Thompson and D. E. Chimenti . New York: Plenum Press.

8. Guo, N. and P. Cawley . 1993. "The Interaction of Lamb Waves with Delaminations in Composite Laminates," J. Acoust. Soc. Am., 94:2240-2246.

9. Guo, N. and P. Cawley . 1992. "Lamb Waves for the NDE of Composite Laminates," in Review of Progress in Quantitative Nondestructive Evaluation, Vol. 11, edited by D. O. Thompson and D. E. Chimenti . New York: Plenum Press.

10.

10. Bar-Cohen, Y. and D. E. Chimenti . 1986. "NDE of Defects in Composites Using Leaky Lamb Waves," in Symposium on Nondestructive Evaluation, 15th, Proceedings (A86-47129 22-38). San Antonio, TX: Nondestructive Testing Information Analysis Center.

11.

11. Balasubramaniam, K. and J. L. Rose . 1990. "Guided Plate Wave Potential for Damage Analysis of Composite Materials," in Review of Progress in Quantitative Nondestructive Evaluation, Vol. 9, edited by D. O. Thompson and D. E. Chimenti . New York: Plenum Press.

12.

12. Street, K. N. , A. J. Russell and F. Bonsang . 1988. "Thermal Damage Effects on Delamination Toughness of a Graphite/Epoxy Composite," Composites Science and Technology, 32:1-14.

13.

13. Herakovich, C. T. and M. W. Hyer . 1986. "Damage-Induced Property Changes in Composites Subjected to Cyclic Thermal Loading," Engineering Fracture Mechanics, 25:779-791.

14.

14. Stansfield, K. E. and E. Pritchard . 1989. "Damage Generation and Healing During Composite Thermal Spikes," in Proceedings of the International SAMPE Technical Conference, 21st, Atlantic City, NJ.

15.

15. Henaff-Gardin, C. , J. L. Desmeuzes and D. Gaillot . 1996. "Damage Development Due to Cyclic Thermal Loading in Cross-Ply Carbon/Epoxy Laminates," in Fatigue under Thermal and Mechanical Loading, edited by J. Bressers and L. Remy . The Netherlands: Kluwer Academic Publishers.

16.

16. Tao, J. , C. T. Sun , C. Arendt and M. Brunner . 1998. "Interlaminar Shear Strength and Fracture Behavior in Aged Composite Laminates," Journal of Thermoplastic Composite Materials, Vol. 11, March 1998: 124-132.

17.

17. Jang, B. Z. 1994. Advanced Polymer Composites. Materials Park, OH: ASM International.

18.

18. Daniel, I. M. and O. Ishai . 1994. Engineering Mechanics of Composite Materials. New York: Oxford University Press.

19.

19. Tang, B. , E. G. Henneke II and R. C. Stiffler . 1987. "Low Frequency Flexural Wave Propagation in Laminated Composite Plates," in Acousto-Ultrasonics Theory and Application, edited by John C. Duke, Jr. New York: Plenum Press.

20.

20. Huang, W. , S. M. Ziola , J. F. Dorighi and M. R. Gorman . 1998. "Stiffness Measurement and Defect Detection in Laminated Composites by Dry-Coupled Plate Waves," in Process Control and Sensors for Manufacturing, edited by R. H. Bossi and D. M. Pepper . Bellingham, Washington: SPIE.