In this study, polycaprolactone (PCL) scaffolds, consisting of agglomerated microspheres with nanotopographic surface structures, were fabricated by the freeze-drying method. These scaffolds were coated with bone-like apatite by using a calcium phosphate solution similar to saturated simulated body fluid (10× SBF-like) in two different immersion periods (6 and 24 h). Scanning electron microscopic views of the 6-h treatment in 10× SBF-like solution showed formation of calcium phosphate nucleation sites on the PCL scaffolds, while the apatite particles formed characteristic cauliflower-like morphology after 24 h. The X-ray diffraction (XRD) data showed that the mineral phase was made of hydroxyapatite (HA). The osteogenic activity of untreated and SBF-treated PCL scaffolds was examined by pre-osteoblastic MC3T3 cell culture studies. Cells had attached and spread on both the PCL scaffolds and the 6-h SBF immersion-treated scaffolds.
Amato, I., Ciapetti, G., Pagani, S., Marletta, G., Satriano, C., Baldini, N. et al. (2007). Expression of Cell Adhesion Receptors in Human Osteoblasts Cultured on Biofunctionalized Poly-(e-caprolactone) Surfaces, Biomaterials, 28(25): 3668-3678.
2.
Liu, X., Lim, J.Y., Donahue, H.J., Dhurjati, R., Mastro, A.M. and Vogler, E.A. ( 2007). Influence of Substratum Surface Chemistry/Energy and Topography on the Human Fetal Osteoblastic Cell Line hFOB 1.19: Phenotypic and Genotypic Responses Observed In Vitro, Biomaterials, 28(31): 4535-4550.
3.
Hansen, J.C., Lim, J.Y., Xu, L.C., Siedlecki, C.A., Mauger, D.T. and Donahue, H.J. ( 2007). Effect of Surface Nanoscale Topography on Elastic Modulus of Individual Osteoblastic Cells as Determined By Atomic Force Microscopy , J. Biomech., 40(13): 2865-2871.
4.
Gerçek, I., Tığlı , R.S. and Gümüşderelioğlu, M. ( 2008). A Novel Scaffold Based on Formation and Agglomeration of PCL Microbeads by Freeze-Drying, J. Biomed. Mater. Res. A, 86A(4): 1012-1022.
5.
Norman, J.J. and Desai, T.A. ( 2006). Methods for Fabrication of Nanoscale Topography for Tissue Engineering Scaffolds, Ann. Biomed. Eng., 34(1): 89-101.
6.
Fu, J., Hu, Y., Guo, Z., Zhang, Y., Hao, Y. and Li, S. ( 2008). Effect of Surface Micro-topography of Titanium Material on the Behaviors of Rabbit Osteoblast In Vitro, Appl. Surf. Sci., 255(2): 286-289.
7.
Kyriakidou, K., Lucarini, G., Zizzi, A., Salvolini, E., Mattioli Belmonte , M., Mollica, F. et al. (2008). Dynamic Co-seeding of Osteoblast and Endothelial Cells on 3D Polycaprolactone Scaffolds for Enhanced Bone Tissue Engineering, J. Bioact. Compat. Polym., 23(3): 227-243.
8.
Garcia, A.J. and Reyes, C.D. (2005). Bio-adhesive Surfaces to Promote Osteoblast Differentiation and Bone Formation, J. Dent. Res., 84(5): 407-413.
9.
Lee, M.H. , Ducheyne, P., Lynch, L., Boettiger, D. and Composto, R.J. (2006). Effect of Biomaterial Surface Properties on Fibronectin-alpha5beta1 Integrin Interaction and Cellular Attachment, Biomaterials, 27(9): 1907-1916.
10.
Song, W. and Chen, H. ( 2007). Protein Adsorption on Materials Surfaces With Nano-topography, ChineseSci. Bull., 52(23): 3169-3173.
11.
Erbil, H.Y. , Demirel, A.L., Avci, Y. and Mert, O. (2003). Transformation of a Simple Plastic into a Superhydrophobic Surface, Science, 299: 1377-1380.
12.
Ciapetti, G. , Ambrosio, L., Savarino, L., Granchi, D., Cenni, E., Baldini, N. et al. (2003). Osteoblast Growth and Function in Porous Poly-e-caprolactone Matrices for Bone Repair: A Preliminary Study, Biomaterials, 24(21): 3815-3824.
13.
Pitt, C.G., Chasalow, F.I., Hibionada, Y.M., Klimas, D.M. and Schindler, A. ( 1981). Aliphatic Polyesters. I. The Degradation of Poly(e-caprolactone) In Vivo, J. Appl. Polym. Sci., 26(11): 3779-3787.
14.
Choong, C., Triffitt, J.T. and Cui, Z.F. ( 2004). Polycaprolactone Scaffolds for Bone Tissue Engineering Effects of a Calcium Phosphate Coating Layer on Osteogenic Cells, Food Bioprod . Process, 82(c2): 117-125.
15.
Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T. and Yamamuro, T. ( 1990). Solutions able to Reproduce In Vivo Surface-structure Change in Bioactive Glass-ceramic A-W, J. Biomed. Mater. Res. A, 24(6): 721-34.
16.
Taş, A.C. and Bhaduri, S.B. (2004). Rapid Coating of Ti6Al4V at Room Temperature with a Calcium Phosphate Solution Similar to 10X Simulated Body Fluid, J. Mater. Res., 19(9): 2742-2749.
17.
Maviş, B., Demirtaş, T.T., Gümüşderelioğlu, M., Gündüz , G. and Çolak, Ü. (2009 ). Synthesis, Characterization and Osteoblastic Activity of Polycaprolactone Nanofibers Coated with Biomimetic Calcium Phosphate, Acta Biomat., DOI:10.1016/j.actbio.2009.04.037.
18.
Jiao, Y., Liu, Z., Cui, F. and Zhou, C. ( 2007). Effect of Hydrolysis Pretreatment on the Formation of Bone-like Apatite on Poly(L-lactide) by Mineralization in Simulated Body Fluids , J. Bioactive Comp. Polymers, 22(5): 492-507.
19.
Kong, L., Gao, Y., Lu, G., Gong, Y., Zhao, N. and Zhang, X. ( 2006). A Study on the Bioactivity of Chitosan/Nano-hydroxyapatite Composite Scaffolds for Bone Tissue Engineering, Eur. Polym. J., 42(12): 3171-3179.
20.
Lin, F. , Li, Y., Jin, J., Cai, Y., Wei, K. and Yao, J. (2008). Deposition Behavior and Properties of Silk Fibroin Scaffolds Soaked in Simulated Body Fluid, Mater . Chem. Phys., 111(1): 92-97.
21.
Suck, K., Behr, L., Fischer, M., Hoffmeister, H., Griensven, M., Stahl, F. et al. (2007). Cultivation of MC3T3-E1 Cells on a Newly Developed Material (Sponceram1) Using a Rotating Bed System Bioreactor, J. Biomed. Mater. Res. A, 80A(2): 268-275.
22.
Tiaw, K.S., Goh, S.W., Hong, M., Wang, Z., Lan, B. and Teoh, S.H. ( 2005). Laser Surface Modification of Poly(e-caprolactone) (PCL) Membrane for Tissue Engineering Applications, Biomaterials , 26(7): 763-769.
23.
Hou, Q. , Grijpma, D.W. and Feijen, J. (2003). Preparation of Interconnected Highly Porous Polymeric Structures by a Replication and Freeze-drying Process , J. Biomed. Mater. Res. B, 67B(2): 732-740.
24.
Salgado, A.J. , Coutinho, O.P. and Reis, R.L. (2004). Bone Tissue Engineering: State of Art and Future Trends, Macromol Biosci., 4(8): 743-765.
25.
Sharma, B. and Elisseeff, J.H. ( 2004). Engineering Structurally Organized Cartilage and Bone Tissues, Ann. Biomed. Eng., 32(1): 148-159.
26.
Cancedda, R. , Dozin, B., Giannoni, P. and Quarto, R. (2003). Tissue Engineering and Cell Theraphy of Cartilage and Bone, Matrix Biol., 22(1): 81-91.
27.
Hutmacher, D.W., Kirsch, A., Ackermann, K.L. and Huerzeler , M.B. (2001). A Tissue Engineered Cell Occlusive Device for Hard Tissue Regeneration: A Preliminary Report, Int. J. Periodont Rest., 21(1): 49-59.
28.
Shikinami, Y. and Okuno, M. (1998). Bioresorbable Devices Made of Forged Composites of Hydroxyapatite (HA) Particles and Poly(L-lactide) (PLLA): PartI. Basic Characteristics, Biomaterials, 20(9): 859-877.
29.
Gazdag, A., Lane, J., Glaser, D. and Forster, R. ( 1995). Alternatives to Autogenous Bone Graft: Efficacy and Indications , J. Am. Acad. Orthop. Sur., 3(1): 1-8.
30.
Cornell, C.N. and Lane, J.M. (1992). Newest Factors in G-Fracture Healing, Clin. Orthop., 277: 297-311.
31.
Barrere, F., van Blitterswijk, C.A., de Groot, K. and Layrolle, P. ( 2002). Influence of Ionic Strength and Carbonate on the Ca-P Coating Formation from SBFX5 Solution, Biomaterials, 23(9): 1921-1930.
32.
Rezwan, K., Chen, Q.Z., Blaker, J.J. and Boccaccini, A.R. ( 2006). Biodegradable and Bioactive Porous Polymer/Inorganic Composite Scaffolds for Bone Tissue Engineering, Biomaterials , 27(18): 3413-3431.
33.
Clemens, J.A. , Wolke, J.G., Klein, C.P. and de Groot, K. (1999). Fatigue Behaviour of Calcium Phosphate Coatings with Different Stability Under Dry and Wet Conditions , J. Biomed. Mater. Res. B, 48(5): 741-748.
34.
Bagambisa, F.B. , Joos, U. and Schilli, W. (1993). Mechanisms and Structure of Bond Between Bone and Hydroxyapatite Ceramics, J. Biomed. Mater. Res. A, 27(8): 1047-1055.
35.
Neo, M. , Kotani, S., Nakamura, T., Yamamuro, T., Ohtsuki, C., Kokubo, T. et al. (1992). A Comparative Study of Ultrastructures of Interfaces Between Four Kinds of Surface-active Ceramic and Bone, J. Biomed. Mater. Res. A, 26(11): 1419-1432.
36.
Barrere, F. , van Blitterswijk , C.A., de Groot, K. and Layrolle, P. (2002). Nucleation of Biomimetic Ca-P Coatings on Ti6Al4V from a SBFX5 Solution: Influence of Magnesium, Biomaterials, 23(10): 2211-2220.
37.
Oyane, A., Uchida, M., Choong, C., Triffitt, J., Jones, J. and Ito, A. ( 2005). Simple Surface Modification of Poly(e-caprolactone) for Apatite Deposition from Simulated Body Fluid, Biomaterials , 26(15): 2407-2413.
38.
Ning, C., Cheng, H., Zhu, W., Yin, Z., Chen, H., Zheng, H. et al. (2008). In Vitro Mineralization of Surface-modified Porous Polycaprolactone Scaffolds in Simulated Body Fluid, Appl. Surf. Sci., 255(2): 429-431.
39.
Loh, X.J. , Sng, K.B.C. and Li, J. (2008). Synthesis and Water-swelling of Thermo Responsive Poly(ester urethane)s Containing Poly(e-caprolactone), Poly(ethylene glycol) and Poly(propylene glycol), Biomaterials , 29(22): 3185-3194.
40.
Geçer, A., Yıldız , N., Erol, M. and Çalımlı, A. ( 2008). Synthesis of Chitin Calcium Phosphate Composite in Different Growth Media, Polym. Compos., 29(1): 84-91.
41.
Owen, T.A., Aronow, M., Shalhoub, V., Barone, L.M., Wilming, L. and Tassinari, M.S. ( 1990). Progressive Development of the Rat Osteoblast Phenotype In Vitro Reciprocal Relationships in Expression of Genes Associated with Osteoblast Proliferation and Differentiation During Formation of the Bone Extracellular Matrix, J. Cell. Physiol., 143(3): 420-30.
42.
Li, X., van Blitterswijk, C.A., Feng, Q., Cui, F. and Watari, F. ( 2008). The Effect of Calcium Phosphate Microstructure on Bone-related Cells In Vitro, Biomaterials, 29(23): 3306-3316.
