A β-TCP scaffold with a branched channel system was designed to create a novel micro-device that allowed culture perfusion and direct time observation of the cells attached. The scaffold was made by indirect solid free form fabrication (SFF) technology. The flow channel structure was exposed so that the perfusion of the mesenchymal stem cell (MSC) culture could be viewed directly. The cell-seeded scaffolds were continuously perfused for 7 days in the micro-device; during this time, it was possible to observe the dynamic culture processes with cells adhering to the scaffolds and real time cell growth directly. This concept has great potential for use in bone tissue engineering and for versatile fabrication of enhanced scaffolds.
WilsonC.E., de BruijnJ.D., van BlitterswijkC.A., VerboutA.J., and DhertW.J. (2004). Design and Fabrication of Standardized Hydroxyapatite Scaffolds with a Defined Macro Architecture by Rapid Prototyping for Bone Tissue Engineering Research, Biomedical Material Research, 68A: 123–132.
2.
SakaiaY., OtsukabM., HanadaaS., NishiyamacY., KonishicY., and YamashitabA. (2004). A Novel Poly-L-lactic Acid Scaffold that Possesses a Macroporous Structure and a Branching/Joining Three-dimensional Flow Channel Network: Its Fabrication and Application to Perfusion Culture of Human Hepatoma Hep G2 Cells, Materials Science and Engineering C, 24: 379–386.
3.
KyriakidouK., LucariniG., ZizziA., SalvoliniE., Mattioli BelmonteM., MollicaF. (2008). Dynamic Co-seeding of Osteoblast and Endothelial Cells on 3D Polycaprolactone Scaffolds for Enhanced Bone Tissue Engineering, Journal of Bioactive Compatible Polymers, 23: 227–243.
4.
LamC.X.F., MoX.M., TeohS.H., and HutmacherD.W. (2004). Scaffold Development Using 3-D Printing with a Starch-based Polymer, Materials Science and Engineering C, 20: 49–56.
5.
CharriereE., LemaitreJ., ZyssetPh. (2003). Hydroxyapatite Cement Scaffolds with Controlled Macroporosity: Fabrication Protocol and Mechanical Properties, Biomaterials, 24: 809–817.
6.
KokuboS., NozakiK., FukushimaS., TakahashiK., MiyataK., FujimotoR., and YokotaS. (2008). Recombinant Human Bone Morphogenetic Protein-2 as an Osteoinductive Biomaterial and a Biodegradable Carrier in a Rabbit Ulnar Defect Model, Journal of Bioactive Compatible Polymers, 23: 348–366.
7.
XuW., WangX., YanY., and ZhangR. (2008). Rapid Prototyping of Polyurethane for the Creation of Vascular Systems, Journal of Bioactive Compatible Polymers, 23(1): 103–114.
8.
Gabriel ChuT.M., OrtonD.G., HollisterS.J., FeinburgS.E., and HalloranJ.W. (2002). Mechanical and In Vivo Performance of Hydroxyapatite Implants with Controlled Architectures, Biomaterials, 23: 1283–1293.
SorianoH.E. (1992). The Use of DiI-marked Hepatocytes to Demonstrate or Orthotopic, Intra Hepaticeng Raftment Following Hepatocellular Transplantation, Transplantation, 54: 717–723.
11.
GoldsteinA.S., JuarezT.M., HelmkeC.D., GustinM.C., and MikosAG. (2001). Effect of Convection on Osteoblastic Cell Growth and Function in Biodegradable Polymer Foam Scaffolds, Biomaterials, 22: 1279–1288.
12.
MelissaJ., MahoneylR.R., ChenlJ.T., and SaltzmanW.M. (2005). The Influence of Microchannels on Neurite Growth and Architecture, Biomaterials, 26: 771–778.
13.
LinL., JuS., CenL., ZhangH., and HuQ. (2008). Fabrication of Porous β-TCP Scaffolds by Combination of Rapid Prototyping and Freeze Drying Technology, 7th Asian-Pacific Conference on Medical and Biological Engineering, 19(5): 88–91.
14.
PanY., HuangJ.L., and ShaoC.Y. (2003). Preparation of β-TCP with High Thermal Stability by Solid Reaction Route, Journal of Materials Science, 38: 1049–1056.
15.
FreymanT.M., YannasI.V., and GibsonL.J. (2001). Cellular Materials as Porous Scaffolds for Tissue Engineering, Progress Material Science, 46:273–282.
16.
SachlosE., ReisN., AinsleyC., DerbyB., and CzernuszkaJ.T. (2003). Novel Collagen Scaffolds with Predefined Internal Morphology Made by Solid Free Fabrication, Biomaterials, 24: 1487–1497.
17.
XuW., WangX.H., YanY.N., ZhengW., XiongZ., LinF. (2007). Rapid Prototyping Three-dimensional Cell/gelatin/Fibrinogen Constructs for Medical Regeneration, Journal of Bioactive Compatible Polymers, 22(4): 363–377.
18.
BlokhuisT.J., TermaatM.F., BoerF.C., PatkaP., BakkerF.C., and HaarmanH.J. (2000). Properties of Calcium Phosphate Ceramics in Relation to their In Vivo Behavior, Journal of Trauma Injury Infection and Critical Care, 48(1): 179–186.
19.
TabosJ.M., MaddoxR.D., KrebsbachP.H., and HollisterS.J. (2004). Indirect Solid Free form Fabrication of Local and Global Porous, Biomimetic and Composite 3-D Polymer-ceramic Scaffolds, Biomaterial, 24: 181–194.
20.
BotchweyE.A., DupreeM.A., PollackS.R., LevineE.M., and LaurencinC.T. (2003). Tissue Engineered Bone: Measurement of Nutrient Transport in Three-dimensional Matrices, Journal of Biomedical Materials Research, 67A: 357–367.
21.
KawazoeN., LinX., TateishiT., and ChenG. (2009). Three-dimesionnal Culture of Rat Pancreatic RIN-5F Cells in a PLGA-collagen Hybrid Porous Scaffold, Journal of Bioactive Compatible Polymers, 24: 23–39.
22.
GouletR.W., GoldsteinS.A., CiarelliM.J., KuhnJ.L., BrownM.B., and FeldkampL.A. (1994). The Relationship between the Structural and Orthogonal Compressive Properties of Trabecular Bone, Journal of Biomechanical, 27(4): 375–389.
23.
BancroftG.N., SikavitsasV.I., and MikosA.G. (2003). Design of a Flow Perfusion Bioreactor System for Bone Tissue-engineering Applications, Tissue Engineering, 9: 549–558.
24.
PorteraB., ZauelbR., StockmancH., GuldbergaR., and FyhriebD. (2005). 3-D Computational Modeling of Media Flow through Scaffolds in a Perfusion Bioreactor, Journal of Biomechanics, 38: 543–549.
25.
YaoR., ZhangR., YanY., and WangX. (2009). In Vitro Angiogenesis of Three-dimensional Tissue Engineered Adipose Tissues, Journal of Bioactive Compatible Polymers, 24: 5–23.
26.
YanY.N., WangX.H., XiongZ., LiuH.X., LiuF., LinF. (2005). Direct Construction of a Three-dimensional Structure with Cells and Hydrogel, Journal of Bioactive Compatible Polymers, 20(3): 259–269.
