Sage Journals: Discover world-class research

Abstract

A precise control over the internal architecture was essential for manufacture of complex organs. To create vascular systems that mimic human livers, we designed and fabricated complex 3D objects with an intrinsic network of interconnected channels. A new elastomeric polyurethane, mainly based on polycaprolactone and poly(ethylene glycol) with excellent biocompatibility and tunable biodegradation properties, was used to fabricate these vascular systems using a low temperature deposition system based on the layer-by-layer manufacturing principle. A specific model was selected via computer aided design (CAD), solid free form fabrication processes are conducted under computer direction. Two example object patterns were produced by precision controlled dispensing of a biodegradable polyurethane into 3D multi-micro-tunnels with multi-micro-pores at a low temperature (-28°C). The design and fabrication strategies used to create physical objects directly from CAD models represent a promising route for the establishment of complex organ vascular systems.

Keywords

rapid prototyping polyurethane synthetic vascular systems tissue engineering organ manufacturing synthetic organs.

Get full access to this article

View all access options for this article.

References

Griffith, L.G. and Naughton, G. (2002). Tissue engineering-current Challenges and Expanding Opportunities , Science, 295: 1009—1014.

Hutmacher, D.W. , Schantz, T. , Zein , I. , Ng , K.W. , Teoh, S.H. and Tan , K.C. (2001). Mechanical Properties and Cell Cultural Response of Polycaprolactone Scaffolds Designed and Fabricated Via Fused Deposition Modeling , J. Biomed. Mater. Res., 55: 203—216.

Ciardilli, G. , Rechichi, A. , Sartori, S. , D'Acunto, M. , Caporale, A. , Peggion, E. et al. (2006). Bioactive Polyurethanes in Clinical Applications, Polymers for Advanced Technologies, 17(9): 786—789.

Liu, S.Q. and Kodama , M. (1992). Porous Polyurethane Vascular Prostheses with Variable Compliances , J. Biomed. Mater. Res ., 26: 1489—1502.

Zdrahala, R.J. and Zdrahala , I.J. (1999). Biomedical Applications of Polyurethanes: A Review of Past Promises, Present Realities, and a Vibrant Future , Journal of Biomaterials Applications , 14: 67—90.

Ciardelli, G. , Rechichi, A. , Cerrai , P. , Tricoli, M. , Barbani, N. and Giusti, P. (2004). Segmented Polyurethanes for Medical Applications: Synthesis, Characterization and in vitro Enzymatic Degradation Studies , Macromolecular Symposia, 218: 261—271.

Mackay, T.G. , Bernacca, G.M. , Wheatley , D.J. , Fisher, A.C. and Hindle, C.S. (1996). In Vitro Function and Durability Assessment of a Polyurethane Heart Valve Prosthesis , Artificial Organs, 20: 1017—1025.

Lelah, M.D. and Cooper, S.L. (1996). Polyurethane in Medicine, CRC Press, Boca Raton, FL.

Yin, D.Z. , Wang, X.H. , Yan , Y.N. and Zhang, R.J. (2007). Preliminary Studies on Peripheral Nerve Regeneration Along a New Polyurethane Conduit , J. Bioact. Compat. Polym., 22(2): 143—159.

10.

Yan, Y.N. , Wang, X.H. , Yin , D.Z. and Zhang, R.J. (2007). A New Polyurethane/heparin Vascular Graft for Small-caliber Vein repair , J. Bioact. Compat. Polym., 22(3): 323—341.

11.

Sachs, E. , Cima, M. , Williams, P. , Brancazio, D. and Cornie, J. (1992). Three Dimensional Printing: Rapid Tooling and Prototypes Directly form a CAD Model , J. Eng. Ind., 144: 481—488.

12.

Mironov, V. , Boland, T. , Trusk , T. , Forgacs, G. and Markwald, R.R. (2003). Organ Printing: Computer-aided Jet-based 3D Tissue Engineering, TRENDS Biotechnol., 21(4): 157—161.

13.

Xiong, Z. , Yan, Y.N. and Zhang, R.J. (2001). Fabrication of Porous Poly (L-lactic acid) Scaffolds for Bone Tissue Engineering Via Precise Extrusion , Scripta Materialia, 45(7): 773—779.

14.

Xiong, Z. , Yan, Y.N. , Wang, S.G. , Zhang, R.J. and Zhang, C. (2002). Fabrication of Porous Scaffolds for Bone Tissue Engineering Via Low-temperature Deposition , Scripta Materialia , 46: 771—776.

15.

Yang, S. , Leong, K. , Du, Z. and Chua, C. (2002). The Design of Scaffolds for Use in Tissue Engineering. Part II . Rapid Prototyping Techniques, Tissue Eng., 8: 1—11.

16.

Martz, H. , Beaudoin, G. , Paynter, R. , King, M. , Marceau, D. and Guidoin, R. (1987). Physiocochemical Characterization of a Hydrophilic Microporous Polyurethane Vascular Graft , J. Biomed. Mater. Res., 21: 399—412.

17.

Yamada, H. (1980). Strength of Biological Materials, pp. 115—129, Williams & Wilkins, Baltimore.

18.

Santerre, J.P. , Woodhouse, K. , Laroche , B. and Labow, R.S. (2005). Understanding the Biodegradation of Polyurethanes: From Classical Implants to Tissue Engineering Materials , Biomaterials, 26: 7457—7470.

19.

Dunnen, W.F.A. , van derlei, B. , Schakenraad , J.M. , Blaavw, E.H. , Stokroos, I. , Pennings, A.J. et al. (1993 ). Long Term Evaluation of Nerve Regeneration in a Biodegradable Nerve Guide , Microsurgery , 14: 508—515.

20.

Holland, S.J. , Tighe, B.J. and Gould, P.L. (1986). Polymers for Biodegradable Medical Devices. 1. The Potential of Polyesters as Controlled Macromolecular Release Systems , J. Control. Rel.,4: 155—180.

21.

Yan, Y.N. , Wang, X.H. , Pan , Y.Q. , Liu , H.X. , Cheng, J. , Xiong, Z. et al. (2005). Fabrication of Viable Tissue-engineered Constructs with 3D Cell-assembly Technique , Biomaterials, 26: 5864—5871.

22.

Yan, Y.N. , Wang, X.H. , Xiong , Z. , Liu , H.X. , Liu , F. , Lin , F. et al. (2005). Direct Construction of a Three-dimensional Structure with Cells and Hydrogel , J. Bioact. Compat. Polym., 20: 259—269.

23.

Wang, X. , Yan, Y.N. , Pan, Y.Q. , Xiong, Z. , Liu, H.X. , Cheng, J. et al. (2006). Generation of Three-dimensional Hepatocyte/gelatin Structures with Rapid Prototyping System , Tissue Eng., 12(1): 83—90.

24.

Zhang, T. , Yan, Y.N. , Wang, X.H. , Xiong, Z. , Lin, F. , Wu, R.D. et al. (2007). Three-Dimensional Gelatin and Gelatin/hyaluronan Hydrogel Structures for Traumatic Brain Injury , J. Bioact. Compat. Polym., 22(1): 19—29.

25.

Xu, W. , Wang, X.H. , Yan, Y.N. , Zheng, W. , Xiong, Z. , Lin, F. et al. (2007). Rapid Prototyping of Three-dimensional Cell/gelatin/fibrinogen Constructs for Medical Regeneration , J. Bioact. Compat. Polym., 22(4): 363—377.

26.

Wang, X.H. , Yan, Y.N. , Lin, F. , Xiong, Z. , Wu, R.D. , Zhang, R.J. et al. (2005). Preparation and Characterization of a Collagen/chitosan/heparin Matrix for an Implantable Bioartificial Liver , J. Biomater. Sci. Polym. Ed., 16(9): 1063—1080.

Rapid Prototyping of Polyurethane for the Creation of Vascular Systems

Abstract

Keywords

Get full access to this article

References