A functional-region/separate-interface/single-cell-type of tissue engineering pathway was evaluated to regenerate osteochondral defects that are deep in the marrow cavity. A gradient osteochondral scaffold fabricated via a rapid prototyping technology, called multi-nozzle low-temperature deposition manufacturing, was composed of three parts with different materials and pore-structures, respectively, for bone, cartilage and a separate interface between them. The separate interface was composed of micro-pores, that were less than 5 urn and with low porosity, to reduce or to avoid the destruction of the micro-environment in vivo by preventing blood and cells and reducing the amount of oxygen and nutrients moving from the marrow cavity to the articulate marrow. The preliminary results after 6 weeks of implantation into 4 mm diameter osteochondral defects in the knee joints of rabbits showed that the defects with the scaffold/cells composition had bone-like or cartilage-like tissue filling the defects with smooth surface, while the defects with nothing (blank) showed only fibrous tissue.
FelsonD.T., LawrenceR.C., HochbergM.C., McAlindonT., DieppeP.A., MinorM.A. (2000). Osteoarthritis: New Insights - Part 1: The Disease and its Risk Factors. Annals of Internal Medicine, 133(8): 635–646.
2.
ArcherC.W., and Francis-WestP. (2003). The Chondrocyte, International Journal of Biochemistry and Cell Biology, 35(4): 401–404.
3.
HutmacherD.W., SchantzT., ZeinI., NgK.W., TeohS.H, and TanK.C. (2001). Mechanical Properties and Cell Cultural Response of Polycaprolactone Scaffolds Designed and Fabricated Via Fused Deposition Modeling, Journal of Biomedical Materials Research, 55(2): 203–216.
4.
MirandaP., SaizE., GrynK., and TomsiaA.P. (2006). Sintering and Robocasting of Beta-tricalcium Phosphate Scaffolds for Orthopaedic Applications, Acta Biomaterialia, 2(4): 457–466.
5.
AngT.H., SultanaF.S.A., HutmacherD.W., WongY.S., FuhJ.Y.H., MoX.M. (2002). Fabrication of 3D Chitosan-Hydroxyapatite Scaffolds using a Robotic Dispensing System, Materials Science and Engineering C-Biomimetic and Supramolecular Systems, 20(1-2): 35–42.
6.
TanK.H., ChuaC.K., LeongK.F., NaingM.W., and CheahC.M. (2005). Fabrication and Characterization of Three-dimensional Poly(ether-ether-ketone)/-Hydroxyapatite Biocomposite Scaffolds Using Laser Sintering, Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine, 219(H3): 183–194.
7.
RoyT.D., SimonJ.L., RicciJ.L., RekowE.D., ThompsonV.P., and ParsonsJ.R. (2003). Performance of Degradable Composite Bone Repair Products Made via Three-dimensional Fabrication Techniques, Journal of Biomedical Materials Research Part A, 66A(2): 283–291.
8.
SodianR., LoebeM., HeinA., MartinD.P., HoerstrupS.P., PotapovE.V. (2002). Application of Stereolithography for Scaffold Fabrication for Tissue Engineered Heart Valves, Asaio Journal, 48(1): 12–16.
9.
LiuL., XiongZ., ZhangR.J., and YanY.N. (2008). Multi-nozzle Low Temperature Deposition System for Construction of Gradient Tissue Engineering Scaffolds, Journal of Biomedical Materials Research Part B-Applied Biomaterials, In press.
10.
LiuL., XiongZ., YanY.N., HuY.Y., ZhangR.J., and WangS.G. (2007). Porous Morphology, Porosity, Mechanical Properties of Poly(-hydroxy Acid)-tricalcium Phosphate Composite Scaffolds Fabricated by Low-temperature Deposition, Journal of Biomedical Materials Research Part A, 82A(3): 618–629.
11.
XiongZ., YanY.N., WangS.G., ZhangR.J., and ZhangC. (2002). Fabrication of Porous Scaffolds for Bone Tissue Engineering Via Low-temperature Deposition, Scripta Materialia, 46(11): 771–776.
12.
KyriakidouK., LucariniG., ZizziA., SalvoliniE., Mattioli BelmonteM., MollicaF. (2008). Dynamic Co-seeding of Osteoblast and Endothelial Cells on 3D Polycaprolactone Scaffolds for Enhanced Bone Tissue Engineering, Journal of Bioactive Compatible Polymers, 23: 227–243.
13.
KoçA., EminN., ElçinA.E., and ElçinY.M. (2008). In Vitro Osteogenic Differentiation of Rat Mesenchymal Stem Cells in a Microgravity Bioreactor, Journal of Bioactive Compatible Polymers, 23: 244–261.
14.
KokuboS., NozakiK., FukushimaS., TakahashiK., MiyataK., FujimotoR. (2008). Recombinant Human Bone Morphogenetic Protein-2 as an Osteoinductive Biomaterial and a Biodegradable Carrier in a Rabbit Ulnar Defect Model, Journal of Bioactive Compatible Polymers, 23: 348–366.
15.
YanY.N., WangX.H., XiongZ., LiuH.X., LiuF., LinF. (2005). Direct Construction of a Three-dimensional Structure with Cells and Hydrogel, Journal of Bioactive Compatible Polymers, 20(3): 259–269.
16.
XuW., WangX.H., YanY.N., ZhengW., XiongZ., LinF. (2007). Rapid Prototyping Three-dimensional Cell/Gelatin/Fibrinogen Constructs for Medical Regeneration, Journal of Bioactive Compatible Polymers, 22(4): 363–377.
17.
JiaoY., LiuZ., CuiF., and ZhouC. (2007). Effect of Hydrolysis Pretreatment on the Formation of Bone-like Apatite on Poly(L-lactide) by Mineralization in Simulated Body Fluids, Journal of Bioactive Compatible Polymers, 22: 492–507.
18.
TongJ.-C., and YaoS.-L. (2007). Novel Scaffold Containing Transforming Growth Factor-β1 DNA for Cartilage Tissue Engineering, Journal of Bioactive Compatible Polymers, 22: 232–244.
19.
ZhangT., YanY.N., WangX.H., XiongZ., LinF., WuR.D. (2007). Three-dimensional Gelatin and Gelatin/Hyaluronan Hydrogel Structures for Traumatic Brain Injury, Journal of Bioactive Compatible Polymers, 22(1): 19–29.
20.
SherwoodJ.K., RileyS.L., PalazzoloR., BrownS.C., MonkhouseD.C., CoatesM. (2002). A Three-dimensional Osteochondral Composite Scaffold for Articular Cartilage Repair, Biomaterials, 23(24): 4739–4751.
21.
ParkT.G. (1995). Degradation of Poly(Lactic-co-glycolic Acid) Microspheres - Effect of Copolymer Composition, Biomaterials, 16(15): 1123–1130.
22.
LeeS.J., KhangG., LeeY.M., and LeeH.B. (2002). Interaction of Human Chondrocytes and NIH/3T3 Fibroblasts on Chloric Acid-treated Biodegradable Polymer Surfaces, Journal of Biomaterials Science-Polymer Edition, 13(2): 197–212.
23.
YuanH.P., De BruijnJ.D., ZhangX.D., Van BlitterswijkC.A., and De GrootK. (2001). Use of an Osteoinductive Biomaterial as a Bone Morphogenetic Protein Carrier, Journal of Materials Science-Materials in Medicine, 12(9): 761–766.
24.
YuanH.P., YangZ.J., de BruijnJ.D., de GrootK., and ZhangX.D. (2001). Material-dependent Bone Induction by Calcium Phosphate Ceramics: A 2.5-year Study in Dog, Biomaterials, 22(19): 2617–2623.
25.
QuS.X., LengY., GuoX., ChengJ.C.Y., ChenW.Q., YangZ.J. (2002). Histological and Ultrastructural Analysis of Heterotopic Osteogenesis in Porous Calcium Phosphate Ceramics, Journal of Materials Science Letters, 21(2): 153–155.
26.
BergsmaJ.E., DebruijnW.C., RozemaF.R., BosR.R.M., and BoeringG. (1995). Late Degradation Tissue-Response to Poly(L-Lactide) Bone Plates and Screws, Biomaterials, 16(1): 25–31.
