Preparation of Hydroxypropylcellulose Membranes using Slow Ionotropic Reactions Configured in an Experimental Design

Abstract

This study applied a Face-Centered Central Composite Design to prepare various hydroxypropylcellulose (HPC) membranes using slow ionotropic reactions. After the assessment of various salting-out agents, sodium carbonate was selected as the ideal electrolyte capable of inducing sufficient membrane growth. The factors studied included the concentration of hydroxypropylcellulose [HPC] (1-2%w/v), concentration of salt [Salt] (10-20%w/v) and the salting-out reaction time (SORT) (96-144 hours). The experimental and predicted responses in the design included the measurement of the Brinell Hardness Number (BHN), gel thickness, moisture absorption and membrane erosion. Surface morphological examination revealed that the membranes varied from highly porous to closely packed networks. Statistically, the experimental and predicated response values showed no significant differences (p 0.05) based on a one way ANOVA. A significant decrease in BHN was observed as the [HPC] was increased. This was attributed to an increase in the elasticity of the membrane. The increase in moisture absorption was accompanied by an increase in gel thickness and subsequently an increase in membrane erosion around the peripheral areas of the gel structure. In the case of the [Salt], all response values were reduced above 15%w/v, except in the case of the BHN. In the case of SORT, there was a substantial increase in the responses above 120 hours, except once again for BHN. Above 120 hours the matrix became loose due to extensive infiltration and crystallization of salt ions. The interactions plots indicated that the changes among the different factor levels were found to be significant (p 0.05). The average p-values for the changes between levels for each response were: BHN - p 0.035, moisture absorption - p 0.029, gel thickness - p 0.011, and erosion - p 0.042. This technology may be applicable in the development of membrane scaffolds for interconnecting tissues via their role in cell seeding, adhesion and regeneration.

Keywords

hydroxypropylcellulose experimental design ionotropic gelation polymeric membranes tissue engineering Brinell Hardness Number gel thickness moisture absorption membrane erosion

Get full access to this article

View all access options for this article.

References

Werbowyj, R.S. and Gray, D.G. (1980). Ordered Phase Formation in Concentrated Hydroxypropyl Cellulose Solutions , Macromolecules, 13: 69-73 .

Hirsch, S.G. and Spontak, R.J. (2002). Temperature-Dependent Property Development in Hydrogels Derived from Hydroxypropylcellulose , Polymer, 43: 123-129 .

Marsano, E. , Bianchi, E. and Sciutto, L. (2003). Microporous Thermally Sensitive Hydrogels Based on Hydroxypropylcellulose Crosslinked With Poly-Ethyleneglicol Diglycidyl Ether , Polymer, 44: 6835-6841 .

Kunugi, S. , Yoshida, D. and Kiminami, H. (2001). Effects of Pressure on the Behavior of (Hydroxypropyl) Cellulose in Aqueous Solution , Colloid and Polymer Science, 279: 1139-1143 .

Marsano, E. , Costa, C. and Bianchi, E. (2002). Optically Anisotropic Polymer Blends: Hydroxypropylcellulose/Polyvinylpyrrolidone , Polymer Communication, 43: 1021-1024 .

Almeida, P.L. , Tavares, S. , Martins, A.F. , Godinho, M.H. , Cidade, M.T. and Figueirinhas, J.L. (2002). Cross-Linked Hydroxypropylcellulose Films: Mechanical Behaviour and Electro-Optical Properties of PDLC Type Cells , Optical Materials, 20: 97-100 .

(1996). Hydrogels and Biodegradable Polymers for Bioapplications. Ottenbrite, R.M. , Huang, S.J. and Park, K. (eds), American Chemical Society, Washington, DC .

Marsano, E. , Gagliardi, S. , Ghioni, F. and Bianchi, E. (2000). Behaviour of Gels Based on (Hydroxypropyl) Cellulose Methacrylate , Polymer, 41: 7691-7698 .

Fortunato, E. , Godinho, M.H. , Santos, H. , Marques, A. , Assuncao, V. , Pereira, L. , Aguas, H. , Ferreira, I. and Martins, R. (2003). Surface Modification of a New Flexible Substrate Based on Hydroxypropylcellulose for Optoelectronic Applications , Thin Solid Films, 442: 127-131 .

10.

Sosnik, A. and Cohn, D. (2005). Reverse Thermo-Responsive Poly(Ethylene Oxide) and Poly(Propylene Oxide) Multiblock Copolymers , Biomaterials, 26: 349-357 .

11.

Zhang, K. and Yu Wu, X.Y.X. (2004). Temperature and pH-Responsive Polymeric Composite Membranes for Controlled Delivery of Proteins and Peptides , Biomaterials, 25: 5281-5291 .

12.

Heij, J.M.D. and Du Prez, F.E. (2004). Fast, Multi-Responsive Microgels Based on Photo-Crosslinkable Poly (2-(Dimethylamino)Ethyl Methacrylate) , Polymer, 45: 6771-6778 .

13.

Uraki, Y. , Imura, T. , Kishimoto, T. and Ubukata, M. (2004). Body Temperature-Responsive Gels Derived from Hydroxypropylcellulose Bearing Lignin, Carbohydrate Polymers (in press).

14.

Liu, W. , Zhang, B. , Lu, W.W. , Li, X. , Zhu, D. , De Yao, K. , Wang, Q. , Zhao C. and Wang, C. (2004). A Rapid Temperature-Responsive Sol-Gel Reversible Poly (N-Isopropylacrylamide)-G-Methylcellulose Copolymer Hydrogel , Biomaterials, 25: 3005-3012 .

15.

Sosnik, A. and Cohn, D. (2004). Ethoxysilane-Capped PEO-PPO-PEO Tri-blocks: A New Family of Reverse Thermo-Responsive Polymers , Biomaterials, 25: 2851-2858 .

16.

Hasegawa, S. , Ohashi, H. , Maekawa, Y. , Katakai, R. and Yoshida, M. (2004). Thermo- and pH-Sensitive Gel Membranes Based on Poly-(Acryloyl-L-Proline Methyl Ester)-Graft-Poly(Acrylic Acid) for Selective Permeation of Metal Ions, Radiation Physics and Chemistry (in press).

17.

Marsano, E. , Bianchi, E. and Viscardi, E. (2004). Stimuli Responsive Gels Based on Interpenetrating Network of Hydroxy Propylcellulose and Poly(N-Isopropylacrylamide) , Polymer, 45: 157-163 .

18.

Amis, E.J. and Han, C.C. (1982). Cooperative and Self-Diffusion of Polymers in Semidilute Solutions by Dynamic Light Scattering , Polymer, 23: 1403-1406 .

19.

Nyström, B. , Boileau, S. , Hemery, P. and Roots, J. (1981). Cooperative Phenomena in Semi-Dilute Solutions of Poly (Oxyethylene) , European Polymer Journal, 17: 249-252 .

20.

Remoissenet, M. (1978). Cooperative Diffusion in One Dimensional Ionic Conductors and Soliton Brownian Motion , Solid State Communications, 27: 681-684 .

21.

Bishop, P.N. (2000). Structural Macromolecules and Supramolecular Organisation of the Vitreous Gel , Progress in Retinal and Eye Research, 19: 323-344 .

22.

Edwards, R.H. , De Berrios, J. , Mossman, A.P. , Takeoka, G.R. , Wood, D.F. and Mackey, B.E. (1998). Texture of Jet Cooked, High Amylose Corn Starch-Sucrose Gels , Lebensmitte-Wissenschaft Und-Technologie, 31: 432-438 .

23.

Hinkley, J.A. , Morgret, L.D. , Gehrke, S.H. (2004). Tensile Properties of Two Responsive Hydrogels , Polymer, 45: 8837-8843 .

24.

NIST and SEMATECH . (2003). e-Handbook of Statistical Methods. Available at: http://www.itl.nist.gov/div898/handbook/.