First Order Evaluation of Fire Hazard in a Room Due to the Burning of Poly(Vinyl Chloride) Products in a Plenum: Estimation of the Time Required to Establish an Untenable Atmosphere
Restricted accessResearch articleFirst published online March, 1988
First Order Evaluation of Fire Hazard in a Room Due to the Burning of Poly(Vinyl Chloride) Products in a Plenum: Estimation of the Time Required to Establish an Untenable Atmosphere
A study has been made to investigate the hazard due to the presence of PVC products (wire coating, rigid conduit and flexible conduit) in a plenum, in a variety of scenarios. It has been found that the fire itself, even if it is of low toxic potency, will cause an untenable atmosphere by:
(a) flashover conditions
(b) generation of lethal concentrations of toxicants, both in the room of origin of the fire and in other rooms
long before the toxicity of the smoke from the PVC products becomes of concern.
In summary, this work has shown that PVC products contained behind fire- rated ceilings are of little concern as regards fire safety.
Hilado, C.J. "Flammability Handbook for Plastics," 3rd. Ed., Lancaster, PA:Technomic Publishing Co., Inc. (1982).
6.
Smith, E.E. in Ignition, Heat Release and Non-Combustibility of Materials, ASTM STP 502, A. F. Robertson, ed., Philadelphia, p. 119 (1972).
7.
Babrauskas, V. "Development of the Cone Calorimeter. A Bench-Scale Heat Release Rate Apparatus Based on Oxygen Consumption," Nat. Bur. Stands., NBSIR82-2611 (1982).
8.
Hirschler, M.M. and G.F. Smith.Eastern States Comb. Inst. Fall Tech. Mtg, paper 63, Gaithersburg, MD (November 2-6, 1987).
9.
Babrauskas, V.J. Fire Flammability, 12:51 (1981).
10.
Quintiere, J.G.Fire Mats, 6:145 (1982).
11.
Breden, L.H. and M. Meisters.J. Fire Flammability, 7:234 ( 1976).
12.
Babrauskas, V. and J.F. Krasny.In Fire Safety, Science and Engineering, ASTM STP 882, T. Z. Harmathy, ed., Philadelphia, p. 268 (1985).
13.
Babrauskas, V.J. Fire Sciences, 2:5 (1984).
14.
Smith, G.F. and E.D. Dickens.Proc. 8th Int. Conf. Fire Safety, C. J. Hilado, ed., San Francisco: Product Safety, p. 227 (1983).
15.
Levin, B.C. , A.J. Fowell, M.M. Birky, M. Paabo, A. Stolte and D. Malek. "Further Development of a Test Method for the Assessment of the Acute Inhalation Toxicity of Combustion Products," Nat. Bur. Stands. NBSIR82-2532 (1982).
16.
Casarett, L.J. in Toxicology—The Basic Science of Poisons , L. J. Casarett and J. Doull, eds., New York: Macmillan, p. 24 (1975).
17.
Kaplan, H.L. , A.F. Grand, W.G. Switzer, D.S. Mitchel, W.R. Rogers and G.E. Hartzell.J Fire Sci., 3:228 (1985).
18.
Hartzell, G.E. , S.C. Packham, A.F. Grand and W.G. Switzer.J. Fire Sci., 3:195 (1985).
19.
Hinderer, R.K. and H.L. Kaplan.Dangerous Properties of Industrial Materials Report, p. 2 (March/April 1987).
20.
Higgins, E.A. , V. Diorca, A.A. Thomas and H.V. Davis.Fire Technol., 8:120 (1972).
Kaplan, H.L., M.M. Hirschler, W.G. Switzer and A.W. Coaker.Proc. 13th. Int. Conf. Fire Safety, C. J. Hilado, ed. San Francisco: Product Safety, p. 279 (1988).
Bertelo, C.A., W.F. Carroll, M.M. Hirschler and G.F. Smith.Proc. 11th. Int. Conf. Fire Safety, C. J. Hilado, ed., San Francisco: Product Safety, p. 192 (1986).
30.
Bertelo, C.A., W.F. Carroll, M.M. Hirschler and G.F. Smith.Fire Safety Science, Proc. 1st. Int. Symp., C. E. Grant and P. J. Pagni, eds., Washington: Hemisphere, p. 1079 (1986).
31.
Beitel, J.J., C.A. Bertelo, W.F. Carroll, A.F. Grand, M.M. Hirschler and G.F. Smith.J. Fire Sci., 5:105 (1987).
32.
Galloway, F.M. and M.M. Hirschler. In Mathematical Modeling of Fires, ASTM STP 983, J. R. Mehaffey, ed., Philadelphia: Amer. Soc. for Testing and Materials, p. 35 (1988).
33.
Hirschler, M.M. and G.F. Smith.Eastern Section Combust. Inst. Fall Tech. Mtg., San Juan, Puerto Rico, paper 40 (1986).
34.
Carroll, W.F. , M.M. Hirschler and G.F. Smith, in RETEC Conf. on "PVC: THE ISSUES, Atlantic City, NJ, p. 76 (September 1987 ).
35.
Burgess, W.A. , R.D. Treitman and A. Gold. "Air Contaminants in Structural Firefighting," N.F.P.C.A. Project 7X008, Harvard School Public Health (1979).
36.
Grand, A.F., H.L. Kaplan and G.H. Lee. "Investigation of Combustion Atmospheres in Real Fires ," U.S.F.A. Project 80027, Southwest Research Institute (1981).
37.
New York State Uniform Fire Prevention and Building Code-Art. 15, Part 1120 Combustion Toxicity Testing and Regulations for Implementing Building Materials and Finishes Fire Gas Toxicity Data File (1987).
38.
Bukowski, R.W Fire Technol.,21:252 (1985).
39.
Benjamin, I.A.J. Fire Sci., 5:25 (1987).
40.
McCaffrey, B.J., J.G. Quintiere and M.F. Harkleroad, Fire Technol.,17:98 (1981).
41.
Babrauskas, V.Fire Technol.,16:94 (1980).
42.
Thomas, P.H. Fire Mats,5:103 (1981).
43.
Lawson, J.R. and J.G. Quintiere.Fire Technol.,21:267 (1983).
44.
Anderson, R.C. , P.A. Croce and J.D. Sakura. "Study to Assess the Feasibility of Incorporating Combustion Toxicity Requirements into Building Material and Furnishing Codes of New York State," A. D. Little, Inc., Reference 88712 (May 1983).
45.
Alarie, Y., M. Matijak-Schaper and M.R. Stock.Fire Sci. Technol., 1(1):10 ( 1982).
46.
Carslaw, H.S. and J.C. Jaeger. "Conduction of Heat in Solids," 2nd ed. Oxford University Press, Oxford, p. 102 ( 1959).
