Calculations of the Heat Release Rate by Oxygen Consumption for Various Applications

Abstract

The calculation of heat release rate by oxygen consumption is based on the assumption that all materials release approximately the same amount of heat per unit mass of oxygen consumed. This technique is now being employed to determine the heat release rate of materials in various heat release rate cal orimeters. Other uses include the heat release rate of assemblies in the fire en durance furnaces and the total heat release rate in room fire tests. These dif ferent applications lead to different experimental procedures which require dif ferent formulas. The experimental choices or constraints include open or closed systems, paramagnetic or high temperature oxygen analyzers, CO₂ analyzers or CO₂ traps, and the use of a gas burner whose heat release rate must be deducted from the total. Various assumptions about CO levels in the exhaust duct and vitiation and humidity in the incoming air are made. General formulas for the heat release rate by oxygen consumption are developed in this paper from which the formulas for specific applications can easily be derived.

Keywords

fire tests calorimeter room fire test heat release rate oxygen consumption.

Get full access to this article

View all access options for this article.

References

Thornton, W.M. , "The Relation of Oxygen to the Heat of Combustion of Organic Compounds," Philosphical Magazine, Vol. 33, pp. 196-203 (1917).

Hinkley, P.L. , Wraight, H.G.H. and Wadley, A. , "Rates of Heat Output and Heat Transfer in the Fire Propagation Test ," Fire Research Note No. 709, Fire Research Station, Borehamwood, England (1968).

Parker, W.J. , "An Investigation of the Fire Environment in the ASTM E84 Tunnel Test ," NBS Technical Note 945, Nat. Bur. Stand., Washington, DC (August 1977).

Sensenig, D.L. , "An Oxygen Consumption Technique for Determing the Contribution of Interior Wall Finishes to Room Fires," NBS Technical Note 1128, Nat. Bur. Stand. , Washington, DC (July 1980).

Krause, R.F. and Gann, R.G. , "Rate of Heat Release Measurements Using Oxygen Consumption," Journal of Fire and Flammability, Vol. 12, pp. 117-130 (1980).

Smith, E.E. , "Heat Release Rate of Building Materials," Ignition, Heat Release Rate, and Non-Combustibility of Materials, ASTM STP 502, American Society for Testing and Materials, Philadelphia, PA , pp. 119-134 (1972).

Huggett, C. , "Estimation of Rate of Heat Release by Means of Oxygen Consumption Measurements," Fire and Materials, Vol. 4, pp. 61-65 (1980).

"Proposed Method for Room Fire Test of Wall and Ceiling Materials and Assemblies," 1982 Annual Book of ASTM Standards, Part 18, pp. 1618-1638, American Society for Testing and Materials , 1916 Race St., Philadelphia, PA 19103.

Fisher, F.L. and Williamson, R.B. , "Intralaboratory Evaluation of a Room Fire Test Method," NBS-GCR-83-421, Nat. Bur. Stand., Washington, DC (1983).

10.

Wickstrom, U. Sundstrom, B. and Holmstedt, G. , "The Development of a Full-Scale Room Fire Test," to be published in Fire Safety Journal.

11.

Babrauskas, V. , "Development of the Cone Calorimeter—A Bench Scale Heat Release Rate Apparatus Based on Oxygen Consumption," NBSIR 82-2611, Nat. Bur. Stand., Washington, DC (November 1982).

12.

Svensson, G. and Ostman, B. , "Rate of Heat Release for Building Materials by Oxygen Consumption ," STFI Meddelande Series A, nr 761, Swedish Forest Products Laboratory, Stockholm, Sweden (1982).

13.

Svensson, G. and Ostman, B. , "Rate of Heat Release by Oxygen Consumption Testing of Building Materials ," STFI Meddelande Series A, nr 812, Swedish Forest Products Laboratory, Stockholm, Sweden (1983).

14.

Bluhme, D. , "Nordtest Project 115-117, Part 2: ISO RHR Test Apparatus with Oxygen Consumption Technique," Dansk Institut for Provning og Justering, Copenhagen (1982).

15.

Babrauskas, V. , Lawson, J.R. , Walton, W.D. and Twilley, W.H. , "Upholstered Furniture Heat Release Rates Measured with a Furniture Calorimeter," NBSIR 82-2604, Nat. Bur. Stand., Washington, DC (December 1982).

16.

Fang, J.B. , "Fire Endurance Tests of Selected Residential Floor Construction," NBSIR 82-2488, Nat. Bur. Stand., Washington, DC (August 1982).

17.

Parker, W.J. , "Calculations of the Heat Release Rate by Oxygen Consumption for Various Applications," NBSIR 81-2427-1, Nat. Bur. Stand., Washington, DC (March 1982).