Wool is a natural fiber with lower heat release/flammability than some synthetic fabrics, but it has not been well studied for its heat release when other fibers such as cotton, linen, and nylon are present in the woven fabric. In this article, the heat release and vertical flame spread of six commercially available natural color fabrics is reported. This includes 100% wool, 80% wool/20% nylon, 70% wool/30% linen, 45% wool/55% cotton, and 40% wool/38% cotton/12% nylon/10% metallic thread fabric. Heat release was measured through cone calorimetry (ASTM E1354) as a function of the sample mounting method, through microscale combustion calorimetry (ASTM D7309), and flame spread was measured by ASTM D6413. The type of insulated backing used greatly affected the cone calorimeter results, and fabric types did show some effects in vertical flame spread and microscale combustion calorimeter testing.
GalaskaMLHorrocksARAlexanderB. Flammability of natural plant and animal fibers: a heat release survey. Morgan Fire Mater2017; 41: 275–288.
2.
GalaskaMLSqrowLDWolfJD, et al. Flammability characteristics of animal fibers: single breed wools, alpaca/wool, and llama/wool blends. Fibers2019; 7: 3–22.
3.
CardamoneJM. Flame resistant wool and wool blends. In: KilincFS (ed.) Handbook of fire resistant textiles. Cambridge: Woodhead Publishing, 2013, pp. 245–271.
4.
ASTM F2700 - 08 (2013). Standard test method for unsteady-state heat transfer evaluation of flame resistant materials for clothing with continuous heating.
5.
ParikhDVNamSHeQ. Evaluation of three flame retardant (FR) grey cotton blend nonwoven fabrics using micro-scale combustion calorimeter. J Fire Sci2012; 30: 187–200.
6.
HajjREl HageRSonnierR, et al. Grafting of phosphorus flame retardants on flax fabrics: Comparison between two routes. Polym Degrad Stab2018; 147: 25–34.
7.
AlongiJMilnesJMalucelliG, et al. Thermal degradation of DNA-treated cotton fabrics under different heating conditions. J Anal Appl Pyrol2014; 108: 212–221.
8.
YangCQHeQLyonRE, et al. Investigation of the flammability of different textile fabrics using micro-scale combustion calorimetry. Polym Degrad Stab2010; 95: 108–115.
9.
YangCQHeQ. Textile heat release properties measured by microscale combustion calorimetry: Experimental repeatability. Fire Mater2012; 36: 127–137.
10.
MorganABYipPW. Effects of laundering on military uniform fabric flammability. Fire Mater2016; 40: 599–611.
11.
LauferGKirklandCMorganAB, et al. Intumescent multilayer nanocoating, made with renewable polyelectrolytes, for flame-retardant cotton. Biomacromolecules2012; 13: 2843–2848.
12.
ChangSSlopekRPCondonB, et al. Surface coating for flame-retardant behavior of cotton fabric using a continuous layer-by-layer process. Ind Eng Chem Res2014; 53: 3805–3812.
13.
GuinTKreckerMMilhornA, et al. Maintaining hand and improving fire resistance of cotton fabric through ultrasonication rinsing of multilayer nanocoating. Cellulose2014; 21: 3023–3030.
14.
HaileMFincherCFometeS, et al. Water-soluble polyelectrolyte complexes that extinguish fire on cotton fabric when deposited as pH-cured nanocoatings. Polym Degrad Stab2015; 114: 60–64.
15.
LeistnerMAbu-OdehAARohmerSC, et al. Water-based chitosan/melamine polypropylene multilayer nanocoating that extinguishes fire on polyester-cotton fabric. Carbohydr Polym2015; 130: 227–232.
16.
LeistnerMHaileMRohmerS, et al. Water-soluble polyelectrolyte complex nanocoatings for flame retardant nylon-cotton fabric. Polym Degrad Stab2015; 122: 1–7.
17.
ZopeISFooSSeahDGJ, et al. A development and evaluation of a water-based flame retardant spray coating for cotton fabrics. ACS Appl Mater Interf2017; 9: 40782–40791.
18.
YangCQChenQ. Flame retardant finishing of the polyester/cotton blend fabric using a cross-linkable hydroxy-functional organophosphorus oligomer. Fire Mater2019; 43: 283–293.
19.
LiYCSchulzJMannenS, et al. Flame retardant behavior of polyelectrolyte-clay thin film assemblies on cotton fabric. ACS Nano2010; 4: 3325–3337.
20.
LiYCMannenSMorganAB, et al. Intumescent all-polymer multilayer nanocoating capable of extinguishing flame on fabric. Adv Mater2011; 23: 3926–3931.
SchartelBPawlowskiKHLyonRE. Pyrolysis combustion flow calorimeter: A tool to assess flame retarded PC/ABS materials?Thermochimica Acta2007; 462: 1–14.
23.
StoliarovSICrowleySWaltersRN, et al. Prediction of the burning rates of charring polymers. Combust Flame2010; 157: 2024–2034.
24.
CogenJMLinTSLyonRE. Correlations between pyrolysis combustion flow calorimetry and conventional flammability tests with halogen-free flame retardant polyolefin compounds. Fire Mater2009; 33: 33–50.
25.
LyonRESafronavaNQuintiereJG, et al. Material properties and fire test results. Fire Mater2014; 38: 264–278.
26.
WhiteRHNamSParikhDV. Cone calorimeter evaluation of two flame retardant cotton fabrics. Fire Mater2013; 37: 46–57.
27.
VasilijevicJColovicMJermanI, et al. In Situ prepared polyamide 6/DOPO-derivative nanocomposite for melt-spinning of flame retardant textile filaments. Polym Degrad Stab2019; 166: 50–59.
28.
ManfrediACarosioFFerrutiP, et al. Linear polyamidoamines as novel biocompatible phosphorus-free surface-confined intumescent flame retardants for cotton fabrics. Polym Degrad Stab2018; 151: 52–64.
29.
SpearpointMOlenickSMToreroJL, et al. Ignition performance of new and used motor vehicle upholstery fabrics. Fire Mater2005; 29: 265–282.
30.
TataJAlongiJCarosioF, et al. Optimization of the procedure to burn textile fabrics by cone calorimeter: Part I. Combustion behavior of polyester. Fire Mater2011; 35: 397–409.
31.
DevauxERocheryMBourbigotS. Polyurethane/clay and polyurethane/POSS nanocomposites as flame retarded coating for polyester and cotton fabrics. Fire Mater2002; 26: 149–154.
32.
CarosioFLauferGAlongiJ, et al. Layer-by-layer assembly of silica-based flame retardant thin film on PET fabric. Polym Degrad Stab2011; 96: 745–750.
33.
TataJAlongiJFracheA. Optimization of the procedure to burn textile fabrics by cone calorimeter: part II. Results on nanoparticle-finished polyester. Fire Mater2012; 36: 527–536.
34.
ApaydinKLaachachiABallV, et al. Polyallylamine-montmorillonite as super flame retardant coating assemblies by layer-by layer deposition on polyamide. Polym Degrad Stab2013; 98: 627–634.
35.
AlongiJColleoniCRosaceG, et al. Phosphorus- and nitrogen-doped silica coatings for enhancing the flame retardancy of cotton: synergisms or additive effects?Polym Degrad Stab2013; 98: 579–589.
36.
AlongiJCarlettoRADi BlassioA, et al. DNA: a novel, green, natural flame retardant and a suppressant for cotton. J Mater Chem A2013; 1: 4779–4785.
37.
CarosioFAlongiJMalucelliG. Flammability and combustion properties of ammonium polyphosphate-/poly(acrylic acid)- based layer by layer architectures deposited on cotton, polyester, and their blends. Polym Degrad Stab2013; 98: 1626–1637.
38.
AlongiJMalucelliG. Thermal stability, flame retardancy and abrasion resistance of cotton and cotton-linen blends by sol-gel silica coatings containing alumina micro- or nano-particles. Polym Degrad Stab2013; 98: 1428–1438.
39.
CarosioFDi BlasioACutticaF, et al. Flame retardancy of polyester fabrics treated by spray-assisted layer-by-layer silica architectures. Ind Eng Chem Res2013; 52: 9544–9550.
40.
AlongiJCarlettoRABoscoF, et al. Caseins and hydrophobins as novel green flame retardants for cotton fabrics. Polym Degrad Stab2013; 99: 111–117.
41.
CarosioFDi BlasioACutticaF, et al. Flame retardancy of polyester and polyester-cotton blends treated with caseins. Ind Eng Chem Res2014; 53: 3917–3923.
42.
ManfrediACarosioFFerrutiP, et al. Disulfide-containing polyamidoamines with remarkable flame retardant activity for cotton fabrics. Polym Degrad Stab2018; 156: 1–13.
43.
KandolaBKHorrocksARPadmoreK, et al. Comparison of cone and OSU calorimetric techniques to assess the flammability behaviour of fabrics used for aircraft interiors. Fire Mater2006; 30: 241–255.
44.
SchartelBHullTR. Development of fire—retarded materials—interpretation of cone calorimeter data. Fire Mater2007; 31: 327–354.
