Cone calorimeter and room corner fire testing of balsa wood core/phenolic composite skin sandwich panels

Abstract

Polymer composite sandwich core panels are of interest for lightweight construction and portable shelter use. In this article, material selection and construction design were considered for an application which required a high level of fire safety performance. Phenolic + fiberglass skin composites with balsa wood core sandwich panels were constructed and first screened for fire performance with the cone calorimeter (ASTM E1354) at different heat fluxes. From these data, fire testing in the room corner test (ISO 9705) was conducted. The results indicated that these composites could only pass the room corner test if an aluminum skin was used to provide some additional fire protection to the underlying composite. Furthermore, it was found that cone calorimeter testing at very high heat flux (100 kW/m²) was not always indicative of fire performance in the room corner test. How the aluminum skin was mechanically attached to the panel as well as underlying composite construction played an important role in the full-scale fire test results.

Keywords

Cone calorimeter room corner fire protection composites

Get full access to this article

View all access options for this article.

References

http://www.sp.se/en/index/services/calculations/conetools/Sidor/default.aspx (accessed 20 August 2013)

Morgan

Bundy

. Cone calorimeter analysis of UL-94 V-rated plastics. Fire Mater 2007; 31: 257–283.

Bartholmai

Schartel

. Assessing the performance of intumescent coatings using bench-scaled cone calorimeter and finite difference simulations Fire Mater 2007; 31: 187–205.

Quintiere

Lian

. Inherent flammability parameters—room corner test application. In: Proceedings of Fire and Materials 2007 conference, San Francisco, CA, 29–31 January 2007. London: Interscience Communications.

Cogen

Lin

Lyon

. Correlations between pyrolysis combustion flow calorimetry and conventional flammability tests with halogen-free flame retardant polyolefin compounds. Fire Mater 2009; 33: 33–50.

Laymon

Borgerson

Ghandhi

. Use of bench-scale test methods to predict the fire growth of large-scale room corner tests for building materials. In: Proceedings of Fire and Materials 2009 conference, San Francisco, CA, 26–28 January 2009, pp. 141–153. London: Interscience Communications.

Schartel

Bartholmai

Knoll

. Some comments on the use of cone calorimeter data. Polym Degrad Stabil 2005; 88: 540–547.

Schartel

Hull

. Development of fire-retarded materials—interpretation of cone calorimeter data. Fire Mater 2007; 31: 327–354.

NAVSEA DDS-078-1:2004. Composite materials, surface ship, topside structural and other topside applications—fire performance requirements.

10.

Morgan

Gagliardi

Price

. Cone calorimeter testing of S2 glass reinforced polymer composites. Fire Mater 2009; 33: 323–344.

11.

Walters

Lyon

. Molar group contributions to polymer flammability. J Appl Polym Sci 2002; 87: 548–563.

12.

Ulven

Vaidya

. Post-fire low velocity impact response of marine grade sandwich composites. Composites Part A: Appl S 2006; 37: 997–1004.

13.

Ulven

Vaidya

. Impact response of fire damaged polymer-based composite materials. Composites Part B: Eng 2008; 39: 92–107.

14.

Schartel

Beck

Bahr

. Sub-micrometre coatings as an infrared mirror: a new route to flame retardancy. Fire Mater 2012; 36: 671–677.