Aqueous solutions of nano lithium silicates with 5.5/1.0 and 7.5/1.0 silica/alkali molar ratios were used to impregnate Pinus radiata. To obtain these impregnants, a solution of 3.5/1.0 SiO2/Li2O molar ratio was used; this ratio was increased with nanosilica solution. The impregnations were realized using Bethell process. The curing was made with dibutylamine phosphate, a divalent cation and both chemicals used sequentially. Panels were tested in oxygen index (OI) chamber and two-foot tunnel. The statistical interpretation indicates that the best economical and technical performance was reached with impregnant of the highest silica content and with zinc cation for curing.
Athey R. and Shaw P.The problem with fire. Eur Coat J1999; 10: 428-431.
2.
Sargent P.Multi-layer paint: the fire problem. Pigm Resin Technol1998; 27(6): 361-370.
3.
Horrocks A. and Price D.Fire retardant materials. Boca Raton: CRC Press, USA and Woodhead Publishing Ltd, UK, 2001.
4.
Koslowsky R. and Przybylak M. In: Horrocks, Price (eds) Natural polymers, wood and lignocellulosic materials, fire retardant materials. UK: CRC Press, 2004, pp.293-317.
5.
Factor A.Fire and Polymers. In: Nelson G (ed.) Char formation in aromatic engineering polymers. USA: ACS, 1990, pp.274-287.
6.
Wilkie CAThe design of flame retardants. In: Nelson G (ed.) Fire and Polymers. Vol. 13, Washington, USA: ACS Symposium Series, 1990, pp.178-188.
7.
Drysdale D.Fire safety design requirements of flame-retarded materials. In: Horrocks and Price (ed.) Fire Retardant Materials . Cardiff, UK: CRC Press, 2004, pp.378-397.
8.
Caciolai M.Testing resistance to fire. Anticorrosione1999; 7(25): 29-33.
9.
Shaw RJThe use of flame retardant coatings on wall and ceilings. J Oil Col Chem Assoc1999; 72(5): 176-180.
10.
Hindersinn RRHistorical aspects of polymer fire retardance. In: Nelson, G (eds) Fire and Polymers. Washington, USA: ACS Symposium Series, 1990, pp.87-96.
11.
Lilla AGProduct and method for forming in situ insoluble metal silicates in wood pores for fire retardation and preservation: U.S. Patent. No.3,974,318.1976.
12.
Grantham et al. Method of pressure treating boards, U.S. Patent. No.6,235,349, 2001.
13.
Shiozawa K.Wood preservative composition, process for treating wood with the same, wood treated with the same, U.S. Patent. No. 5,478,598, 1995.
14.
Slimak et al. Enhancing the strength, moisture resistance, and fire-resistance of wood, timber, lumber, similar plant-derived construction and building materials, and other cellulosic materials, U.S. Patent. No.6,146,766, 2000.
15.
Slimak et al. Enhancing the strength, moisture resistance, and fire-resistance of wood, timber, lumber, similar plant-derived construction and building materials, and other cellulosic materials, U.S. Patent. No.6,040,057, 2000.
16.
Giudice CA and Pereyra AMFire resistance of wood impregnated with soluble alkaline silicates. Res Lett in Mater Sci, Article ID 31956 (digital version), e-ISSN 1687-6830, DOI information 10.1155/RLMS, 2007).
17.
Pereyra AM, Giudice CA and Benitez JCFire retardant impregnants for woods based on alkaline silicates. Fire Saf J2009; 44: 497-503.
18.
Giudice CA and Pereyra AMSilica nanoparticles in high silica/alkali molar ratio solutions as fire retardant impregnants for woods. Fire Mater2010; 34: 177-187.
19.
Devi R. and Maji. T.Studies of properties of rubber wood with impregnation of polymer. Bull Mater Sci2002; 25(6): 527-531.
20.
Box GE, Hunter W. and Hunter S.Statistics for experimenters: an introduction to design, data analysis and model building. USAJ. Wiley & Sons, 1978.
