Due to their low density, high surface-to-mass ratio, high air permeability and open cell structure, slabstock polyurethane foams ignite easily and have a high burning velocity. In this study, the decomposition behavior of melamine in both an inert and an oxygen atmosphere has been investigated. TGA/DSC and EGA-IR experiments revealed the decomposition steps and products in inert and oxygen atmospheres, respectively. Cone calorimeter, NIR-flame characterization and small-scale burner test results showed that the excellent working mechanism of melamine as a flame retardant mainly depends on the formation of an effective closed char layer, which may involve condensation of melamine to form melam, melem, and related products as well as reactions of the amino and isocyanato groups forming urea derivatives, and the sublimation of melamine at the exact temperature at which TDI release occurs.
Oertel, G. (1994). Polyurethane Handbook, 2nd edn, Hansa, Munich.
2.
Randall, D. and Lee, S. (2002). The Polyurethanes Book, Wiley , New York.
3.
Woods, G. (1990). The ICI Polyurethanes Book, 2nd edn, Wiley, Chichester - New York.
4.
Kumaran, M.K. and Bomberg, M.T. (1990). Thermal Performance of Sprayed Polyurethane Foam Insulation with Alternative Blowing Agents, Journal of Building Physics, 14(1): 43-57.
5.
Chao, C.Y.H. and Wang, J.H. (2001). Transition from Smoldering to Flaming Combustion of Horizontally Oriented Flexible Polyurethane Foam with Natural Convection, Combustion and Flame, 127: 2252-2264.
6.
Risk Assessment Report on Tris(2-Chlor-propyl)Phosphate (TCPP). (2008). Scientific Committee on Health and Environmental Risks, Environmental Part, EINECS No. 237-158-7.
7.
Kageoka, M., Tairaka, Y. and Kodama, K. (1997). Effect of Melamine Particle Size on Flexible Polyurethane Foam Properties, J. Cell. Plast., 33: 219-237.
8.
Falke, P., Hendreich, R., Jackson, G., Schroeder, H.J. and Schuster, M. (2002). Procedure for Manufacture of Flame Retardant, Flexible Polyurethane Foam Products Based a Polyether Polyol Mixture and Melamine , BASF-AG Germany, Ger. Offen., DE 2000-10047024.
9.
Lutter, H.-D., Zschische, R., Gabbert, H.-J., Haase, V. and Fimmel, K. (1992). Expanded Graphite-Melamine Dispersions in Polyethers for Production of Fire Resistant Flexible Polyurethane Foams with Low Smoke Generation, BASF-AG Germany, Eur. Pat. Appl., EP 91-117703.
10.
Craig, T.A. , Lear, J.J. and Motte, P. (1993). New Generation Flame Retardant Polyols for Slab-Stock Applications, Polyurethanes World Congr. Proc., 54-59, Technomic, Lancaster, Pa.
11.
Scaccia, C., Fisher, D.H. and Throckmorton, P.E. (1987). Stable Polyol-Melamine Blend for Use in the Manufacture of Fire Retardant Flexible Urethane Foam , Patent Number 4644015.
12.
Schrock, A., Solis, R., Beal, G.E., Skorpenske, R.G. and Parish, D.B. (1989). The Influence of Polymer Morphology and Density on the Combustion of Melamine-Filled Flexible Polyurethane Foams, Proceedings of the SPI Annual Technical/Marketing Conference, San Antonio, Texas.
13.
Schartel, B. and Hull, T.R. (2007). Development of Fire Retarded Materials-Interpretation of Cone Calorimeter Data, Fire and Materials, 31: 327-354.
14.
Directive 95/28/EC of the European Parliament and of the council. (1995). Burning Behavior of Materials used in the interior construction of certain categories of motor vehicle.
15.
Roth, E., Hahn, U., Inone-Kauffmann, E. and Weiser, V. (1999). Sreening Methods to Optimize Flame Retardants in Plastics and Biopolymers, Fraunhofer-Institut Chemische Technologie (ICT) 30th International, Annual Conference of ICT, Karlsruhe.
16.
Eckl, W., Weiser, V. and Weindel, M. (1999). Determination of the Temperature in an Isopropanol Diffusion and a Premixed Propane-Air Flame; Application Note - HGS-1700, WMM Sensorik Gmbh & Co. KG.
17.
Ludwig, C.B., Malkmus, W., Reardon, J.E. and Thomson, J.A.L. (1973). Handbook of Infrared Radiation from Combustion Gases, NASA SP-30980.
18.
Chambers, J., Jiricny, J. and Reese, C. (1981). The Thermal Decomposition of Polyurethanes and Polyisocyanurates, Fire and Materials, 5: 133-141.
19.
Ravey, M. and Pearce, M. (1997). Flexible Polyurethan Foam. I. Thermal Decomposition of a Polyether-based, Water-blown Commercial Type of a Flexible Foam, J. Appl. Polym. Sci., 63: 47-74.
20.
Fabris, H. (1976). Thermal and Oxidative Stability of Urethanes, In: Frisch, K. and Reegen, S. (eds), Advances in Urethane Science and Technology, Vol. 4, Technomic Publishing Co., Inc., Lancaster, PA, pp. 105-106.
21.
Lyon, R.E. (2004). Plastics and Rubber, Handbook of Building Materials for Fire Protection, Harper CA, New York.
22.
Lyon, R.E., Walters, R.N. and Stoliarov, S.I. (2004). Thermal Analysis of Polymer Flammability, presented at 228th ACS Meeting, Philadelphia, PA.
23.
Lotzsch, B.V. and Schnick, W. (2007). Formation of Melam during Thermal Condensation of Melamine, Chem. Eur. J., 13: 4956-4968.
24.
Vanspeybroeck, R., Van Hess, P. and Vandevelde, P. (1993). Combustion Behaviour of Polyurethane Flexible Foams under Cone Calorimeter Conditions, Fire and Materials, 17(4): 155-166.
25.
Grassie, N. and Perdomo-Mendoza , G.A. (1985). Thermal Degradation of Polyether-Urethanes: Part 3-Polyether-Urethanes Prepared from Methylene Bis(4-phenylisocyanate) and Low Molecular Weight Poly(Ethylene Glycols), Polym. Deg. Stab., 10: 267-286.
26.
Kroke, E. and Schwarz, M. (2004). Novel Group 14 Nitrides, Coord. Chem. Rev., 248(5-6): 493-532.
27.
Dick, C.M., Denecker, C., Liggat, J.J., Mohammed, M.H., Snape, C.E., Seely, G., Lindsay, C., Elling, B. and Chaffanjon, P. (2002). Solid State 13C and In Situ 1H-NMR Study on the Effect of Melamine on the Thermal Degradation of a Flexible Polyurethane Foam , Fire and Materials, 26: 1177-1182.
28.
Price, D., Liu, Y., Milnes, G.J., Hull, R., Kandola, B.K. and Horrocks, A.R. (2002). An Investigation into the Mechanism of Flame Retardancy and Smoke Supression by Melamine in Flexible Polyurethane Foam, Fire and Materials, 26: 201-206.
29.
Socrates, G. (2001). Infrared and Raman Characteristic Group Frequencies, Wiley, West Sussex, 3: 89-91.
30.
Forrest, M.J. (1999). Chemical Characterisation of Polyurethanes, Rapra Review Reports, 9(12): 18-19.
31.
Lewin, M. (2001). Synergism and Catalysis in Flame Retardancy of Polymers, Polym. Adv. Techn., 12(3-4): 215-222.
32.
Granzow, A. (1978). Flame Retardation by Phosphorus Compounds, J. Am. Chem. Soc., 11(5): 177-183.
33.
Lewin, M. and Weil, E. (2001). In: Horrocks, A.R. and Price, D. (eds.), Fire Retardant Materials, pp. 32-34, Woodhead Publishing Limited, Cambridge, UK.
34.
Denecker, C., Liggat, J.J. and Snape, C.E. (2006). Relationship between the Thermal Degradation Chemistry and Flammability of Commercial Flexible Polyurethane Foams, J. Appl. Polym. Sci., 100: 3024-3033.
35.
Horrocks, A.R. , Price, D. and Edwards, N.L.C. (1992). The Burning Behaviour of Combustion Modified High Resilience Polyurethane Foams, J. Fire Sci., 10(1): 28-39.
