Studies on the Effect of Atmospheric Oxygen Content on the Thermal Resistance of Intumescent,Fire-Retardant Coatings

Abstract

Studies are conducted to measure the rate of thermal degradation and the thermal resistance of three intumescent fire-retardant coatings under atmospheres of varying oxygen content. The degradation trials are conducted using thermal gravimetric analysis and differential thermal analysis in an atmosphere of nitrogen or air. It has been found that a low oxygen content in the atmosphere significantly affects the rate of degradation of the char material at temperatures greater than 540°C. The global kinetics of the thermal degradation is modeled using three or four first-order parallel reactions. The degradation of char is modeled using the method of invariant kinetic parameters. The derived kinetic parameters are reported. The thermal resistance of the materials coated on steel plates is determined using a cone calorimeter with controlled oxygen content in the atmosphere. It has been found that the thermal resistance of two of the coatings has been strongly influenced by the oxygen content of the atmosphere; hence, this factor may be of importance when predicting the performance of intumescent materials in real fire scenarios.

Keywords

intumescence kinetics coating thermal resistance cone calorimetry invariant kinetic parameters

Get full access to this article

View all access options for this article.

References

ISO 834-1 (1999). Fire-resistance Tests - Elements of Building Construction - Part 1: General Requirements, International Organisation for Standardization .

ASTM E119-00a (2001). Standard Test Methods for Fire Tests of Building Construction and Materials, Vol. 4.07, 2001 ASTM Standards on Disc, ASTM, Pennsylvania .

Cagliostro, D.E. , Riccitiello, S.R. , Clark, K.J. and Dhimizu, A.B. (1975). Intumescent Coating Modelling , J. of Fire & Flammability, 5: 205-221 .

Anderson, C.E. and Wauters, D.K. (1984). A Thermodynamic Heat Transfer Model for Intumescent Systems , Int. J. Eng. Sci., 22(7): 881-889 .

Buckmaster, J. , Anderson, C. and Nachman, A. (1986). A Model for Intumescent Paints , J. Eng. Sci., 24: 263-276 .

Henderson, J.B. and Wiecek, T.E. (1987). A Mathematical Model to Predict the Thermal Response of Decomposing, Expanding Polymer Composites , Journal of Composite Materials, 21: 373-393 .

Bhargava, A. , Griffin, G.J. and Green, J.A. (2000). A Model of Heat Transfer Across an Epoxy Based Fire Retardant Layer Undergoing Sublimation , Intumescence and Degradation, Developments in Chemical Engineering and Mineral Processing, 8(1/2): 75-91 .

Bhargava, A. and Griffin, G.J. (1999). A Two Dimensional Model of Heat Transfer Across a Fire Retardant Epoxy Coating Subjected to an Impinging Flame , Journal of Fire Sciences, 17(3): 188-208 .

Bartholmai, M. , Schriever, R. and Schartel, B. (2003). Influence of External Heat Flux and Coating Thickness on the Thermal Insulation , Fire and Materials, 27: 151-162 .

10.

Carmen, B. and Di Blasi , C. (2002). Analysis of the Combustion Kinetics and Thermal Behaviour of an Intumescent System , Ind. Eng. Chem. Res., 41: 2107-2114 .

11.

Strakov, V.L. , Garashchenko, A.N. , Kuznetsov, G.V. and Rudzinskii, V.P. (2001). Mathematical Simulation of Thermophysical and Thermochemical Processes During Combustion of Intumescent Fire-Protective Coatings , Combustion, Explosion and Shock Waves, 37(2): 178-186 .

12.

Henderson, J.B. and Hagen, S.C. (1985). A Radiant Heat Flux Apparatus for Measuring the Thermal Response of Polymeric Materials to High Temperatures , Polymer Composites, 6(2): 110-114 .

13.

Mamleev, V.Sh. and Gibov, K.M. (1998). Modelling Fire Retardant Intumescent Polymeric Materials, In: Le Bras, M. , Camino, G. , Bourbigot, S. and Delobel, R. (eds), Fire Retardancy of Polymers. The Use of Intumescence, pp. 113-128, The Royal Society of Chemistry, Cambridge .

14.

Zverev, V.G. , Gol’din, V.D. , Nesmelov, V.V. and Tsimbalyuk, A.F. (1998). Modelling Heat and Mass Transfer in Intumescent Fire-Retardant Coatings , Combustion, Explosion and Shock Waves, 34(2): 198-205 .

15.

Zverev, V.G. , Isakov, G.N. , Nesmelov, V.V. and Nazarenko, V.A. (1993). The Heat Transfer Mechanism and Fire Insulation Properties of Some Intumescent Materials , International Journal of Polymeric Materials, 20: 91-99 .

16.

Di Blasi, C. and Branca, C. (2001). Mathematical Model for the Nonsteady Decomposition of Intumescent Coatings , AIChE Journal, 47(10): 2359-2370 .

17.

Leonard, J.E. , Bowditch, P.A. and Dowling, V.P. (2000). Development of a Controlled-Atmosphere Cone Calorimeter , Fire and Materials, 24: 143-150 .

18.

Coats, A.W. and Redfern, J.P. (1964). Kinetic Parameters from Thermogravimetric Data , Nature, 201: 68-69 .

19.

Hurt, R.H. and Calo, J.M. (2001). Semi-Global Intrinsic Kinetics for Char Combustion Modelling , Combustion and Flame, 125: 1138-1149 .

20.

Richard-Campisi, L. , Bourbigot, S. , Le Bras, M. and Delobel, R. (1996). Thermal Behaviour of Cotton-modacrylic Fibre Blends: Kinetic Study Using Invariant Kinetic Parameters Method , Thermochimica Acta, 275: 37-49 .

21.

Sorathia, U. , Gracik, T. , Ness, J. , Durkin, A. , Williams, F. , Hunstad, M. and Berry, F. (2003). Evaluation of Intumescent Coatings for Shipboard Fire Protection , Journal of Fire Sciences, 21: 423-450 .