Treatment of Electric Arc Furnace Dust With a Sustained Shockwave Plasma Reactor

Abstract

In the reprocessing of steel from automotive scrap, lead, cadmium and zinc, which are volatile constituents, vaporize under the extremely high localized temperatures in an electric arc furnace at the points of contact between the graphite electrodes and the charge. These vapors condense to produce a hazardous dust termed electric arc furnace dust (EFD). This study was undertaken to satisfy the need for a mobile system which could be moved from site to site of generators of EFD to avoid transportation of hazardous waste, and to recycle slags and metallic iron products within the plant. A new type of plasma device, the Sustained Shockwave Plasma (SSP) has been developed and tested for treatment of EFD on a laboratory scale (500 g h^-1). Batch tests show that EFD can be treated to produce a non-hazardous slag and metallic zinc and lead to recycle.

Keywords

Electric arc furnace dust plasma processing of waste reprocessing of steel cadmium lead zinc slag steelmaking dust.

Get full access to this article

View all access options for this article.

References

Alcock, C.B. et al. (1987) Operation of a 1-MW Plasma Reactor/Zn-Pb Condenser Pilot Plant for the Recovery of Metals from Arc Dust. Pyrometallurgy London, U.K.: The Institute of Mining and Metallurgy, pp1—18.

Chapman, C.D. & Cowx, P.M. (1991) Treatment of EAF dust by the tetronics plasma process. Steel Times 219, 301-304.

Cmp (1988) Center for Metal Processing: Plasma Treatment of Electric Arc Dust as Demonstrated by Bethlehem-Tetronics . Report No 88-2.

Cmp (1988) Center for Metal Processing: Final Report, Flame Reactor Process for Electric Arc Dust. Prepared by Horsehead Resource Development Company, Monaca, Pennsylvania U.S.A., August, CMP Report No. 88-1.

Elkem Technology (1991) Slag resistance for treatment of EAF dust. Steel Times 219, 306-309.

EP Toxicity Test Procedure (1980) Code of Federal Regulations (FR) 261.33 Appendix II, Vol. 40 Parts 199-399, pp. 380-382.

Federal Register (1980) 45 No. 98, Section 261.32 pp. 33, 124; EFD Hazardous Waste No. K061.

Goksel, M. (1971) Recovery of Iron, Zinc and Lead from BOF Dust and Other Steel Plant ByProducts. Institute of Mineral Research, Michigan Technological University, U.S.A.

McAloon, T.P. (1987) So little time, so many choices. Iron & Steel Making 14, 14-20.

10.

McAloon, T.P. (1990) Decision time for EAF dust generators. Iron & Steel Making 17, 15-20.

11.

Ojima, Y. , Ishikawa, Y. & Yasukawa, M. (1984) Production of Zinc Oxide for Zinc Smelting Process from Steelmaking Dusts at Shisaka Works. (Pamphlet) The Metallurgical Society of AIME, U.S.A.

12.

Page, D. , Heanley, C. & Cowx, P. (1984) The extraction of non-ferrous metals with non-ferrous metal extraction using the tetronics plasma system with emphasis on zinc and lead. MINTEK 50, Proceedings of International Conference on Mineral Science and Technology, (L. F. Haughton, ed.) pp. 817-825.

13.

Reid, K.J. (1984) Plasma metallurgy in the 1980s, MINTEK 50 International Conference on Mineral Science and Technology , (L. F. Haughton, ed.) pp. 27-38.

14.

Serbent, H. , Maczek, H. , & Rellermeyer, H. (1975) Large scale test for the treatment of BOF sludge and BOF dust according to the Waelz Process. 34th Ironmaking Conference, American Institute of Mining, Metallurgical and Petroleum Engineering, 1975.