Sequential extraction for heavy metal distribution of bottom ash from fluidized bed co-combusted phosphorus-rich sludge under the agglomeration/defluidization process

Abstract

Agglomeration that occurs during municipal sewage sludge (MSS) fluidized bed co-combustion might affect heavy metal distribution and the transformation of bottom ash. A study on the mobility and speciation of heavy metals that accompanies agglomeration behavior and phosphorus addition should be examined during MSS co-combustion. Meanwhile, the aim of this study was to evaluate the total content and speciation of heavy metals during the MSS fluidized bed co-combustion by the chemical sequential extraction procedure (SEP). The risk assessment code (RAC) and individual contamination factor (ICF) are calculated to evaluate the mobility of heavy metals and their environmental risks in agglomerates. Moreover, identification of agglomerates is established by both characterization (scanning electron microscopy/energy-dispersive spectroscopy, X-ray photoelectron spectroscopy) and thermodynamic simulation (HSC chemistry software). The experimental results indicated that P and Na would form the lower melting-point compounds such as NaPO₃ and Na₂O in the bottom ash, which promoted agglomeration during MSS fluidized bed co-combustion. According to the simulation, Na and P have a stronger affinity than Si and Cr, and this reaction is not only influenced by particle agglomeration, but also by heavy metal distribution during modified MSS co-combustion. Nevertheless, the results of ICFs and RACs obtained from the SEP indicated that for heavy metals trapped in agglomerates, a weaker binding such as physical covering by eutectics might be considered as the dominant reaction compared with chemical binding to form a metal complex.