Effect of operating conditions and input variations on the partitioning of metals in a municipal solid waste incinerator

Abstract

The partitioning of copper, zinc, cadmium and lead between bottom ash and combustion flue gas was investigated in a municipal solid waste (MSW) incinerator. Material balances were established and transfer coefficients were determined for seven 2-h periods. Statistical analysis of the data allowed assessment of the uncertainty and investigation of the effect of waste input variations as well as process conditions. As a result, 6% of Cu, 54% of both Zn and Pb and 90% of Cd in the waste feed were transferred into the combustion flue gas, the rest was found in the bottom ash. The uncertainty of the partitioning in terms of relative width of 95% confidence intervals was estimated as 33% for Cu, 7% for Zn, 7% for Cd and 21% for Pb. Multiple linear regression indicates that, for the incinerator investigated, changes in combustion parameters have a negligible effect on the transfer coefficients of the selected metals; and the partitioning of Cd and Pb does not correlate significantly with changes in the waste composition. A significant positive regression between the transfer of Cu and the chlorine content of the waste feed was observed. The results of this study are instrumental to determine the waste composition by analysing a single combustion product only.

Keywords

Bottom ash heavy metals partitioning of metals transfer coefficients waste analysis waste incineration

Get full access to this article

View all access options for this article.

References

Baccini, P. & Brunner, P.H. (1991) The Metabolism of the Anthroposphere. Berlin, Germany: Springer Verlag.

Belevi, H. (1995) Dank Spurenstoffen ein besseres Prozessverständnis in der Kehrichtverbrennung (The use of trace substances for a better understanding of MSW incineration). EAWAG News 40D, 19-22.

Borchers, H.-W. (1989) Thermal behaviour of heavy metals in exhausts of waste buming plants. In: Thomé-Kozmiensky, K. J. (ed.) Recycling International, Vol. 2. Berlin, Germany: EF-Verlag für Energie und Umwelttechnik GmbH, pp. 1461-1466.

Brunner, P.H. & Mönch, H. (1986) The flux of metals through a municipal solid waste incinerator. Waste Management and Research 4, 105-119.

BUS (1984) Abfallerhebung 1982/83 (Waste Analysis 1982/83), Bundesamt für Umweltschutz , Bern.

Chandler, A. J. & Associates Ltd., Compass Environmental Inc., Rigo & Rigo Associates, The Environmental Research Group University of New Hampshire, Wastewater Technology Center (1993) Waste analysis, testing and evaluation (waste) program: effect of waste stream characteristics on MSW incineration: the fate and behaviour of metals. Final report of the mass bum MSW incinerator study. Bumaby, BC, Canada, University of New Hampshire (USA).

Häusler, G. (1997) Die Untersuchung des Einflusses von Prozess- und Inputvariationen auf die Transferkoeffizienten ausgewählter Stoffe in der Rostfeuerung (Investigation of the influence of process- and input variations on the transfer coefficients of selected elements in a waste grate furnace). Vienna, Austria: Institute for Water Quality and Waste Management, University of Technology.

Hunsinger, H. , Merz, A. & Vogg, H. (1994) Beeinflussung der Schlackequalität bei der Rostverbrennung von Hausmüll (Influence on the bottom ash quality in grate furnace MSW incineration) . Proceedings of the GVC Symposium 'Abfallwirtschaft-Herausforderung und Chance' . Würzburg, Germany: pp. 185-202.

Jakob, A. , Stucki, S. & Struis, R.P.W.J. (1996) Complete heavy metal removal from fly ash by heat treatment: influence of chlorides on evaporation rates . Environmental Science and Technology 30, 3275- 3283.

10.

Lavalin, Inc. (1987) National Incinerator Testing and Evaluation Program: The Combustion Characterization of Mass Burning Incinerator Technology, Quebec City, Volume II. Ottawa, Ontario, Canada: Environment Canada.

11.

Merz, A. , Hunsinger, H. , Vogg, H. & Heinz, G. (1994) Abfallverbrennung in Rostfeuerungssystemen: Auswirkungen der Feuerungsführung auf Gutbett- und Feuerraumtemperaturen sowie auf das Verbrennungsergebnis, (Grate furnace MSW incineration: consequences of furnace design on bed and furnace temperatures and on result of the incineration) . VGB Tagungsbericht: Feuerungen 1994, Tb217, Vortrag G6. Essen, Germany.

12.

Morf, L. & Brunner, P.H. (1998) The MSW incinerator as a monitoring tool for waste management. Environmental Science and Technology 32, 1825-1831.

13.

Morf, L. , Ritter, E. & Brunner, P.H. (1997) MAPE III 'Online Messung der Stoffbilanz einer MVA als Instrument der Erfolgskontrolle in der Abfallwirtschaft', Teil A: Güter- und Stoffbilanz der MVA Wels (Online Measurement of the Material Balance of the Wels Incinerator), Final Report. Vienna, Austria: Institute for Water Quality and Waste Management, University of Technology.

14.

Pitard, F.F. (1989) Pierre Gy's sampling theory and sampling practice . In: Pitard, F. F. (ed.) Sampling Correctness and Sampling Practice Volume II. Boca Raton, FL, USA: CRC Press, pp. 1-237.

15.

Schachermayer, E. , Bauer, G. , Ritter, E. & Brunner, P.H. (1995) Messung der Giiter- und Stoffbilanz einer Müllverbrennungsanlage (Mass and Element balance of an MSW Incinerator). Bd. 56 Vienna, Austria: Umweltbundesamt.

16.

Schneider, J. , Vehlow, J. , Vogg, H. (1994) Improving the MSWI bottom ash quality by simple in-plant measures. In: Goumans, J. J. M. et al. (eds) Environmental Aspects of Construction with Waste Materials. Amsterdam, the Netherlands: Elsevier, p. 605.

17.

Seeker, W.R. (1991) Metal partitioning considerations in the permitting of incinerators and boilers and industrial furnaces. Proceedings of the 5th Annual Symposium, Incineration of Industrial Wastes. Toxcon, Huston, TX, USA: pp. 6-8.

18.

Tillman, D.A. (1994) Trace Metals in Combustion Systems. Academic Press.

19.

Vehlow, J. (1993) Heavy Metals in Waste Incineration. DAKOFA Conference, September 6, Copenhagen , Denmark.

20.

Vehlow, J. , Rittmeyer, C. , Vogg, H. , Mark, F. & Kayen, H. (1994) Einfluss von Kunststoffen auf die Qualität der Restmüllverbrennung, (Influence of plastics on the quality of MSW incineration) . Proceedings of the GVC Symposium 'Abfallwirtschaft-Herausforderung und Chance'. Würzburg, Germany: pp. 185-202.

21.

Verhulst, D. , Buekens, A. , Spencer, P.J. & Eriksson, G. (1996) Thermodynamic behaviour of metal chlorides and sulfates under conditions of incineration furnaces. Environmental Science and Technology 30, 50-56.

22.

Vogg, H. , Braun, H. , Metzger, M. & Schneider, J. (1986) The specific role of cadmium and mercury in municipal solid waste incineration. Waste Management and Research 4, 65-74.