Environmental assessment of waste incineration in a life-cycle-perspective (EASEWASTE)

Abstract

A model for life-cycle assessment of waste incinerators is described and applied to a case study for illustrative purposes. As life-cycle thinking becomes more integrated into waste management, quantitative tools for assessing waste management technologies are needed. The presented model is a module in the life-cycle assessment model EASEWASTE. The module accounts for all uses of materials and energy and credits the incinerator for electricity and heat recovered. The energy recovered is defined by the user as a percentage of the energy produced, calculated on the lower heating value of the wet waste incinerated. Emissions are either process-specific (related to the amount of waste incinerated) or input-specific (related to the composition of the waste incinerated), while mass transfer to solid outputs are governed by transfer coefficients specified by the user. The waste input is defined by 48 material fractions and their chemical composition. The model was used to quantify the environmental performance of the incineration plant in Aarhus, Denmark before and after its upgrading in terms of improved flue gas cleaning and energy recovery. It demonstrated its usefulness in identifying the various processes and substances that contributed to environmental loadings as well as to environmental savings. The model was instrumental in demonstrating the importance of the energy recovery system not only for electricity but also heat from the incinerator.

Keywords

Waste incineration environmental assessment transfer coefficients life-cycle assessment EASEWASTE wmr 1268—1

Get full access to this article

View all access options for this article.

References

Assefa, G. , Eriksson, O. & Frostell, B. (2005) Technology assessment of thermal treatment technologies using ORWARE. Energy Conversion and Management, 46, 797—819.

Chevalier, J. , Rousseaux, P. , Benoit, V. & Benadda, B. (2003) Environmental assessment of flue gas cleaning processes of municipal solid waste incinerators by means of life cycle assessment approach . Chemical Engineering Science, 58, 2053—2064.

Directive 2000/76/Ec (2000) Incineration of Waste. The European Parliament and the Council, Brussels.

Eriksson, O. , Finnverden, G. , Ekvall, T. & Björklund, A. (2007) Life cycle assessment of fuels for district heating . Energy Policy, 35, 1346—1326.

Kirkeby, J.T. , Bhander, G.S. , Birgisdottir, H. , Hansen, T.L. , Hauschild, M. & Christensen, T.H. (2006) Environmental assessment of solid waste systems and technologies: EASEWASTE. Waste Management & Research, 24, 3—15.

Morselli, L. , Bartoli, M. , Bertacchini, M. , Brighetti, A. , Luzi, J. , Passarini, F. & Masoni, P. (2005) Tools for evaluation of impact associated with MSW incineration. Waste Management, 25, 191—196.

Porteous, A. (2001) Energy from waste incineration — a state of the art emissions review with an emphasis on public acceptability. Applied Energy, 70, 157—167.

Riber, C. , Petersen, C. & Christensen, T.H. (2008) Chemical composition of material fractions in Danish household waste. Waste Management , submitted.

Wenzel, H. , Hauschild, M. & Alting, L. (1997) Environmental Assessment of Products, Vol. 1: Methodology, Tools and Case Studies in Product Development. Kluwer Academic Publishers, Hingham, MA, USA.