Use of plastic waste (poly-ethylene terephthalate) in asphalt concrete mixture as aggregate replacement

Abstract

One of the environmental issues in most regions of Iran is the large number of bottles made from poly-ethylene terephthalate (PET) deposited in domestic wastes and landfills. Due to the high volume of these bottles, more than 1 million m³ landfill space is needed for disposal every year. The purpose of this experimental study was to investigate the possibility of using PET waste in asphalt concrete mixes as aggregate replacement (Plastiphalt) to reduce the environmental effects of PET disposal. For this purpose the mechanical properties of plastiphalt mixes were compared with control samples. This study focused on the parameters of Marshall stability, flow, Marshall quotient (stability-to-flow ratio) and density. The waste PET used in this study was in the form of granules of about 3 mm diameter which would replace (by volume) a portion of the mineral coarse aggregates of an equal size (2.36-4.75 mm). In all prepared mixes the determined 6.6% optimum bitumen content was used. In this investigation, five different percentages of coarse aggregate replacement were used. The results showed that the aggregate replacement of 20% by volume with PET granules would result in a reduction of 2.8% in bulk compacted mix density. The value of flow in the plastiphalt mix was lower than that of the control samples. The results also showed that when PET was used as partial aggregate replacement, the corresponding Marshall stability and Marshall quotient were almost the same as for the control samples. According to most of specification requirement, these results introduce an asphalt mix that has properties that makes it suitable for practical use and furthermore, the recycling of PET for asphalt concrete roads helps alleviate an environmental problem and saves energy.

Keywords

asphalt concrete mix plastiphalt PET plastic waste environment wmr 843-3

Get full access to this article

View all access options for this article.

References

Asphalt Institute . (1993) Mix Design Methods for Asphalt Concrete and Other Hot Mix Types, MS-2, Sixth Edition, pp. 16-32. Asphalt Institute, Lexington, USA .

Donnini mancini, S. & Zanin, M. (1999) Recyclability of PET from virgin resin . Material Research, 2, 33-38 .

Hinislioglu, S. & Agar, E. (2004) Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix . Materials Letters, 58, 267-271 .

Labbafiyan, T. , Khazaee, M. , Tofigh, F. & Ghadimi, S. (2001) PET recycling in food industries . Proc. of the National Symposium of Industrial Research Centers of Iran, Tehran, Iran, pp. 279-285 .

Mir Saeed Ghazi, H. , Emam Jom’e, Z. & Ebrahim Zadeh Mousavi, M.A. (2004) Review of PET recycling methods . Proc.s of the First National Seminar on Recycling and Waste Management on Process Industries, 20-21 September, Tehran, Iran, p. 25 .

Rebeiz, K.S. , Fowler, D.W. & Paul, D.R. (1991) Formulating and evaluating an unsaturated polyester composite made with recycled PET . Journal of Materials Education, 13, 441-454 .

Tabatabai, A.M. (2003) Highway and Airport Pavements, pp. 233-365. University of Tehran Press, Tehran, Iran .

Taheri, Z. (2004) Management and processes of PET recycling . Proc. of the First National Seminar on Recycling and Waste Management on Process Industries, 20-21 September, Tehran, Iran, p. 32 .