Sage Journals: Discover world-class research

Abstract

The present study focuses on the use of solid waste generated by the steel works in Brazil for manufacturing clay-based structural products. The waste sample was characterized regarding chemical composition, X-ray diffraction, particle size, morphology, specific surface and plastic properties. The waste was added in gradual proportions to a kaolinitic clay from zero up to 3 wt.%. Ceramic bodies were formed by vacuum extrusion and fired at 950° C. The physical-mechanical properties (linear shrinkage, water absorption, apparent density and flexural strength) of the resulting clay/solid waste mixtures were determined. In addition, leaching tests were performed according Brazilian Standards as well as a preliminary analysis of gases evolved during the thermal process. It was found that the solid waste is formed by irregular particles, ranging in size from 1 to 500 μm. The test results indicate that solid wastes generated by steel works can be used as filler in construction materials, thereby increasing reuse in an environmentally safe manner.

Keywords

Steel works solid waste recycling leaching civil construction materials wmr 672-1

Get full access to this article

View all access options for this article.

References

ABNT . (1987a): Brazilian Standard NBR 10005 - Toxicity Characteristic Leaching. Procedure (TCLP).

ABNT . (1987b): Brazilian Standard NBR 10004 - Solid Wastes: Classification.

Acosta, A. , Iglesias, I. , Aineto, M. , Romero, M. , & Rincón, J.Ma. (2002): Utilisation of IGCC slag and clay steriles in soft mud bricks (by pressing) for use in building bricks manufacturing . Waste Management. 22(8), 887-891 .

Araújo, L.A. (1997): Siderurgy handbook, (in Portuguese). 2nd edn, Vol. 1. Arte & Ciência, São Paulo, Brazil .

Barbieri, L. , Corradi, A. , Lancellotti, I. , & Manfredini, T. (2002): Use of municipal incinerator bottom ash as sintering promoter in industrial ceramics . Waste Management, 22(8), 859-863 .

Francisco, J.L. (2001): Red Ceramic Brazilian Annual. Criciúma, SC, Brazil .

Kingery, W.D. , Bowen, H.K. , & Uhlmann, D.R. (1976): Introduction to Ceramics, 2nd edn. Wiley-Interscience, New York, USA .

Oliveira, G.E. (2002): Masters Thesis, State University of North Fluminense, Campos dos Goytacazes-RJ, Brazil.

Ortiz, N. , Pires, M.A.F. , & Casola, M.S. (1997): Estudo de reaproveitamento de resíduo de siderurgia. (in Portuguese) . In Proceedings of the 41st Brazilian Ceramic Congress, Vol II. São Paulo, Brazil.

10.

Pracidelli, S. & Melchiades, F. (1997): Importância da composição granulométrica de massas cerâmicas para cerâmica vermelha . Cerâmica Industrial, 2, 31-35 .

11.

Skvára, F. , Kastánek, F. , Pavelková, I. , Salcová, O. , Maléterová, Y. , & Schneider, P. (2002): Solidification of waste steel foundry dust with Portland cement . Journal of Hazardous Materials. 89, 67-81 .

12.

Souza, G.P. , Sanchez, R. , & Holanda J.N.F. (2002): Characteristics and physical-mechanical properties of fired kaolinitic materials . Cerâmica. 48(306), 102-107 .

13.

Souza, G.P. , Sanchez, R. , & Holanda, J.N.F. (2003): Thermal and structural characterization of Brazilian south-eastern kaolinitic clays . Journal of Thermal Analysis and Calorimetry. 78(1), 293-305 .

14.

Xie, W. & Pan, W.P. (2001): Thermal characterization of materials using evolved gas analysis . Journal of Thermal Analysis and Calorimetry. 65(3) 669-685 .

15.

Youssef, N.F. , Abadir, M.F. , & Shater, M.A.O. (1998): Utilisation of soda glass (cullet) in the manufacture of wall and floor tiles . Journal of the European Ceramic Society. 18, 1721-1727 .

Use of mix of clay/solid waste from steel works for civil construction materials

Abstract

Keywords

Get full access to this article

References