Incinerating automotive shredder residue (ASR) in order to increase the recovery from end of life vehicles (ELVs) is an attractive option when recycling this material. In this study, incineration combined with energy recovery, was investigated. The incineration experiments, where 20% shredder residue (SR) was burnt with conventional municipal solid waste (MSW), were conducted in a full-scale MSW horizontal grate incinerator. Measurements were made before, during and after the incineration. The results showed some minor increases in the emission levels of raw gases sampled after an electrostatic filter, but almost no significant differences when sampled after a wet scrubber. An increased level of ‘nontoxic’ metals was detected within the bottom ash. It was concluded that refined SR, in small quantities, is suitable to add to MSW.
Börjeson, L., Marklund, S. & Johansson, S. (1998) The vehicle recovered to fuel - a recycling study concerning residual products from shredding. Report from REFORSK, no. FoU 150, ISSN 0284-9968. Published by the foundation REFOSRK, Ferens väg 9, SE-211 42 Malmö, Sweden.
2.
Börjeson, L., Löfvenius, G., Hjelt, M., Johansson, S. & Marklund, S. (2000) Characterisation of automotive shredder residue from two shredding facilities with different refining processes in Sweden. Waste Management and Research, 49, 1-14.
3.
Field, F.R. & Clark, J.P. (1991) The recycling dilemma for advanced materials use: automobile materials substitution. Materials and Society, 15, no.-2, 109-147.
4.
Funcke, W., Mayer, J., Dresch, H. & Mark, F.E. (1998) PCDD/F emission from a municipal solid waste incinerator during co-combustion of automotive shredder residues. Organohalogen compounds, 36, 171-174.
5.
GRAAB. (1996) Sävenäs Avfallskraftvärmeverk (Sävenäs municipal solid waste incinerator). Pamphlet describing the combined power and heating plant at Sävenäs, Gothenburg, Sweden. Published by the Public Cleansing Company in Gothenburg, Box 156, SE-401 22 Gothenburg, Sweden
6.
Hubble, W.S., Most, I.G. & Wolman, M.R. (1987) Investigation of the energy value of automobile shredder residue. US Department of Energy Report DOE/ID-12551.
7.
Jody, B.J., Daniels, E.J., Bonsignore, P.V. & Shoemaker, E.L. (1992) Chemical and mechanical recycling of shredder fluff. Prepared for presentation and proceedings of Pollution Prevention Conference for Iron & Steel Industry, Chicago, Illinois, October 14-15, 1992.
8.
Jody, B.J., Daniels, E.J. & Teotia, A.P.S. (1996) Recycling of polymers from automobile shredder residue. Convers. Utilisation of Waste Materials, 1996, 77-104.
9.
Lanoir, D., Trouvé, G., Delfosse, L., Froelich, D., & Kassamaly, A. (1997) Physical and chemical characterization of automotive shredder residues. Waste Management and Research, 15, 267-276.
10.
Mark, F.E. (1998) Thermal recovery of (A)SR - a way forward to ELVs management. BHM,143.Jg. Heft1, 28-35. Berg-und Hüttenmännische Monatshefte (BHM) is published in Vienna, Austria in 1998.
11.
Marklund, S.Söderström, G., Ljung, K., Rappe, C., Kraft, M. & Hagenmauer, H. (1992) Parallel sampling for dioxins using various sampling techniques at a Swedish municipal solid waste incinerator. Waste Management and Research, 10, 21-36.
12.
Martin, R., Riess, R., & Vosteen, B. (1992) Thermal treatment of automotive shredder fluff. Proceeding from Davos recycle’92, International Forum and Exposition, 7-10 April 1992. Published by Bayer AG.
13.
Neuendorff, R. (1994) Optimal car recycling during the next ten years - seen from the metal recycles point of view. Report from Technical Support and Devices AB, Oskarshamn, Sweden.
14.
Peterson, M. (1995) Magnet, virvelströmmar och bad. (Magnet, eddy currents and bath)Recycling no.2, 12-13.
15.
Rappe, C. (1994) Dioxins, patterns and source identification. Fresnius journal of analytical chemistry, 348, 63-75.
16.
Ryan, J.V. & Lutes, C.C. (1993) Characterization of emissions from simulated open-burning of non-metallic automobile shredder residue. EPA-report PB93-172914. Published by the Environmental Protection Agency, USA.
17.
Sendijarevic, V., Pokorski, B., Klempner, D. & Frisch, K.C. (1997) Recent developments in shredder downstream separation processes and recycling options for automotive shredder residue. University of Detroit Mercy, USA. Report no. 970663 is published by the Society of Automotive Engineers Incorporation, USA.
18.
SFS. (1997:788) Legislation in the Swedish statute book, number 788, 1997.
19.
Wikström, E., Andersson, P. & Marklund, S. (1998a) Design of a laboratory scale fluidized bed reactor. Review of Scientific Instruments, 69, 1850-1859.
20.
Wikström, E. & Marklund, S. (1998b) Combustion of an artificial municipal solid waste in a laboratory fluidised bed reactor. Waste Management and Research, 16, 342-350.
21.
Zakaria, J., McBath, P. & Sutin, G. (1994) Auto shredder residue (ASR) experience at the SEMASS resource recovery facility. Proceeding at the 87th Annual Meeting -,! Air Waste Management Association, June 19-24, 1994. Solid Waste Management, 12, 29 pp.
