A systematic study of cement/PFA chemical stabilisation/solidification process for the treatment of heavy metal waste

Abstract

The aim of this study is to systematically quantify the physical and chemical properties of the cement based solidified/stabilised heavy metal waste with increasing replacement of cement by PFA. Bulk density and unconfined compressive strength are measured as the physical parameters. The equilibrium extraction tests, sequential chemical tests and dynamic leaching tests are reported as chemical characteristics. The results showed PFA-blended cement-based waste forms have higher porosity and lower strength than the pure cement-based waste forms at experimental curing time. The lower alkalinities of the PFA-blended cement-based waste forms, however, lead to higher leach rates of heavy metals when the waste is exposed to an acidic medium.

Keywords

chemical stabilisation solidification cement PFA hazardous waste

Get full access to this article

View all access options for this article.

References

American Nuclear Society (1986) Measurement of the Leachability of Solidified Low-level Radioactive Wastes by a Short-term Test Procedure, ANSI/ANS 16.1, American Nuclear Society, Illinois, USA.

Batchelor, B. (1990) Leaching Models: Theory and Application. Journals of Hazardous Materials 24, pp. 257–266.

Conner, J. R. (1990) Chemical Fixation and Solidification of Hazardous Wastes. New York: Van Nostrand Reihold.

Cook, J. E. (1983) Fly Ash in Concrete – Technical Considerations.Concrete International September, pp. 51–59.

Cote, P. L. , Constable, P. L. & Moreira, A. (1987) An Evaluation of Cement-based Waste Forms Using the Results of Approximately Two Years of Dynamic Leaching. Nuclear and Chemical Waste Management 7, pp. 129–139.

Federal Register, USA (1986), Vol. 51, No. 114, pp. 21648.

Glasser, F. P. (1993) Chemistry of Cement-Solidified Waste Forms. Chemistry and Microstructure of Solidified Waste Forms ( Spence, R. D. , eds.), Lewis Publishers, pp. 1–40.

Hills, C. D. , Sollars, C. J. & Perry, R. (1993) Ordinary Portland Cement Based Solidification of Toxic Wastes: The Role of OPC Reviewed. Cement and Concrete Research 23, pp. 196–212.

Joshi, R. C. , Lohtia, R. D. & Achari, G. (1995) Fly Ash-Cement Mixtures for Solidification and Detoxification of Oil and Gas Well Sludges. Transportation Research Record, (1486), pp. 35–41.

10.

Methews, J. D. (1987) Pulverised-fuel Ash – Its Use in Concrete. Information Paper, Building Research Establishment. Department of the Environment, United Kingdom.

11.

Poon, C. S. & Lio, K. W. (1997) The Limitation of the Toxicity Characteristic Leaching Procedure for Evaluating Cement-based Stabilised/solidified Waste Forms. Waste Management 17(1), pp. 15–23.

12.

Roy, A. , Eaton, H. C. , Cartledge, F. K. & Tittlebaum, M. E. (1981) Solidification/Stabilisation of a Heavy Metal Sludge by a Portland Cement/Fly ash Binding Mixture. Hazardous Waste and Hazardous Materials 8(1), pp. 33–41.

13.

Poon, C. S. & Perry, R. (1987) Studies of Zinc, Cadmium and Mercury Stabilisation in OPC/PFA Mixtures. Proceedings of the Materials Research Symposium 86, Materials Research Society.

14.

Smith, R. L. (1993) Fly ash for Use in the Stabilisation of Industrials Wastes. Proceedings of the 1993 ASCE Annual Convention and Exposition, Dallas, TX, USA, American Society of Civil Engineers, New York, pp. 58–68.

15.

Stegemann, J. A. & Cote, P. L. (1991) Investigation of Test Methods for Solidified Waste Evaluation – A Cooperative Program. Report EPS 3/HA/8. Environment Canada: Waste Water Technology Centre.