Hot water separation process for copper and insulating material recovery from electric cable waste

Abstract

Recycling in the electric cable industry, especially the complete separation of metal and insulating material for reuse, has always been a problem. The present processes to recover copper and insulating material from cable waste involve the grinding of cables into smaller pieces to improve metal liberation from the insulating material. The method results in fine thread-shaped metal wedges in the insulating material, which prevents the re-use of the insulating material. A 'hot water separation process' was used to recover metal and insulating material from cable waste, with no need to grind the cable into smaller pieces to improve the liberation of copper from the insulating material. Based on the differences in coefficient of thermal expansion of the insulating material and copper, the cables are cut into a suitable length and placed into a blender with hot water. The insulating material and copper are separated and collected individually. By controlling the water temperature, blending speed and cutting length, complete separation can be achieved. This process is suitable for recycling many types of cable waste, including oil-containing wires, which are usually more difficult to recover.

Keywords

Cable waste copper hot water separation process insulating material recycling

Get full access to this article

View all access options for this article.

References

Anonymous (1998) Scrap wire and metal: more valuable than ever. Electrical Apparatus 51, 53-54.

Kertscher, E. (1994) Recycling of cable waste. Wire Industry 61, 40-42. Koehnlechner, R. (1994) Copper separation from cable scrap. Wire Industry 61, 342-343.

Koyanaka, S. , Ohya, H. , Endoh, S. , Iwata, H. & Ditl, P. (1997) Recovering copper from electric cable wastes using a particle shape separation technique. Advanced Powder Technology 8, 103-111.

Krause, F.E. (1994) Vinyl durables recycling. Journal of Vinyl Technology 16, 177-180.

Mankosa, M.J. & Carver, R.M. (1995) Processing of chopped wire waste material using the floatex density separator. In: Queneau, P. B. & Peterson, R. D. (eds.) 3rd International Symposium on Recycling of Metals and Engineered Materials. Warrendale, PA, USA: Minerals, Metals and Materials Society, pp. 111-120.

Mankosa, M.J. , Carver, R.M. & Venkatraman, P. (1997) Processing techniques used to recover secondary materials. Mining Engineering December, 46-51.

Mikofalvy, B.K. , Boo, H.K. , Summers, J.W. , Mittendorg, D.H. & Sell, A. (1993) Traffic cones from recycled vinyl. Journal of Vinyl Technology 15, 159-163.

Rowson, N.A. , Gamer, F.A. & Veasey, T.J. (1990) Thermally assisted liberation for reclamation of copper from copper/plastic scrap. In: Proceedings of the Recycling of Metalliferous Materials Conference. Birmingham, London, UK: Institution of Mining and Metallurgy, pp. 235-245.

Rubin, D.K. (1997) Philip's Canadian high. Engineering News Record 239, 40-44.

10.

Sears, F.W. , Zemansky, M.W. & Young, H.D. (1982). University Physics. Reading, MA, USA: Addison-Wesley, pp. 290-291.

11.

Sijstermans, L.F. (1997) Recycling of cable waste. In: Proceedings of the 1997 14th International Conference and Exhibition on Electricity Distribution. Birmingham, London, UK: Institution of Electrical Engineers, Part 1/3 (of 7), Vol. 3, 8.1-8. 7.

12.

Warczok, J. , Pers, A. & Smieszek, Z. (1990) Processing of cable scrap in Poland. In: Proceedings of the Recycling of Metalliferous Materials Conference, Birmingham, London, UK: Institution of Mining and Metallurgy , pp. 283-289.

13.

Yoshino, A. , Sawada, H. , Suzuki, J. , Hasegawa, M. , Murayama, M. & Shinmoto, T. (1999) Halogen free new recyclable cable with low toxic gas emission. In: Hiroyuki, Y., Ryoichi, Y., Fumihiko, K. , Tadatomo, S. & Yasushi (eds.) Proceedings of the Ecodesign '99: First International Symposium on Environmentally Conscious Design and Inverse Manufacturing. Tokyo, Japan, pp. 979-984.