A non-destructive examination technique using an electromagnetic testing method has been developed for the inspection of reinforced carbon fibre materials. Damage detection was performed on a total of 53 low energy impacts (from 0.5 to 10 Joules) which were induced in realistic samples supplied by the aerospace industry. The eddy-current technique employed was proven very accurate and inherently reproducible in the detection of low energy impact damages in carbon reinforced materials. These damages were below the detection threshold of other conventional NDT methods such as ultrasonic, infrared thermography and radiography. A statistical analysis, making use of probability of detection curves (POD) and receiver operating characteristic curves (ROC) has been performed in order to evaluate the performance of different inspection systems. Computer visualisation facilities were used to locate and quantify impacts on carbon materials. The technique was also proven very efficient to assess the structural integrity of CFRP and GFRP helicopter rotor blades. If correctly applied, eddy current inspection will certainly enhance the quality and efficiency of non-destructive examinations and improve the level of quality and safety required by the aerospace industry.
Get full access to this article
View all access options for this article.
References
1.
1. Wey, A. C. and L. W. Kessler. 1992. "Quantitative Measurement of Delamination Area in Low Velocity Impacted Composites Using Acoustic Microscopy," in ReWiew of Progress in QNDE, Vol. 11, Plenum Press, pp. 1563-1568.
2.
2. Marshall, A. P. and H. Bouadi. 1993. "Low-Velocity Impact Damage on Thick-Section Graphite Epoxy Laminated Plates,"J. of Reinforced Plastics and Composites, 12(12):1281-1294.
3.
3. Greszczuk, L. B. and H. Chao. 1976. "Impact Damage in Graphite-Fiber-Reinforced Composites,"Proc. of 4th Conf: on Composite Materials: Testing and Design, AS7M Pub., May 3-4, pp. 389-408.
4.
4. Chester, R. J. and G. Clark. 1992. "Modelling of Impact Damage Features in Graphite/Epoxy Laminates," in Damage Detection in Composite Materials, ASR'M, pp. 200-212.
5.
5. Reed, P. E. and L. Bevan. 1993. "Impact Damage in a Composite Material,"Polymer Composites, 14(4):286-291.
6.
6. Jones, T. S. and H. Berger. 1989. "Application of NDI Methods to Composites,"Materials Evaluation, 47(4):390-400.
8. Allgaier, M. W.1991. "Visual Testing: Method With a Future,"Materials Evaluation, 49(9):1186-1187.
9.
9. Dewhurst, R. J., R. He and Q. Shan. 1993. "Defect Visualisation in Carbon Fiber Composite Using Laser Ultrasound,"Materials Evaluation, 51(8):935-940.
10.
10. Monchalin, J. P.1992. "Laser-Ultrasonics,"Flight-Vehicle Materials, Structures, and DynamicsAssessment and Future Directions, Vol 4, ASME, Chapter 4.
11.
11. Addison, R. C., H. A. Ryden and A. D. W. McKie. 1991. "Laser Based Ultrasonics for the Inspection of Large Area Gr/Epoxy Composites,"Review of Progress in QNDE, D. O. Thompson and D. E. Chimmenti, eds., New York: Plenum Press, 1OA: 485-492.
12.
12. Jones, T. S.1985. "Inspection of Composites Using the Automated Ultrasonic Scanning System (AUSS),"Materials Evaluation, 43(5):746-753.
13.
13. Buynak, C. F., T. J. Moran and R. W. Martin. 1989. "Delamination and Crack Imaging in Graphite-Epoxy Composites,"Materials Evaluation, 47(4):438-441.
14.
14. Steiner, K. V.1992. "Defect Classification in Composites Using Ultrasonic NDE Techniques,"Damage Detection in Composite Materials, ASTM, pp. 72-84.
15.
15. Jones, T. and H. Berger. 1992. "Thermographic Detection of Impact Damage in Graphite-Epoxy Composites,"Materials Evaluation, 50(12):1446-1453.
16.
16. Cielo, P., X. Maldague, A. A. Deom and R. Lewak. 1987. "Thermographic Nondestructive Evaluation of Industrial Materials and Structures,"Materials Evaluation, 45(4):452-460.
17.
17. Vavilov, V. P., A. DeGiovanni, S. Didierjean, D. Maillet, A. A. Sengoulier and A. S. Houlbert. 1991. "Thermal Flaw Detection and Tomography of CFRP Articles,"7he Soviet J. of NDT, 27(9):609-619.
18.
18. Hobbs, C. P.1992. "The Inspection of Aeronautical Structures Using Transient Thermography,"NDTfor Corrosion in Aerospace Structures, Proc. Royal Aero. Society, pp. 6.1-6.10.
19.
19. Maldague, X. P. V.1993. Nondestructive Examination of Materials by Infrared Thermography. Springer Verlag.
20.
20. Zalameda, J. N. and W. P. Winfree. 1991. "Thermal Imaging of Graphite/Epoxy Composite Samples with Fabricated Defects,"Review of Progress in QNDE, D. O. Thompson and D. E. Chimmenti, eds., New York: Plenum Press, 1OA:485-492.
21.
21. Fassbender, R. H. and D. J. Hagemaier. 1983. "Low Kilovoltage Radiography of Composites,"Materials Evaluation, 41(6):831-838.
22.
22. Girshovich, S., T. Gottesman, H. Rosenthal, E. Drukker and Y. Steinberg. 1992. "Impact Damage Assessment of Composites;"Damage Detection in Comtposite Materials, ASIM, pp. 183-199.
23.
23. Sheldon, W. H.1978. "Comparative Evaluation of Potential NDE Techniques for Inspection of Advanced Composite Structures,"Materials Evaluation, (Feb):41-46.
24.
24. Hashimoto, M., H. Nakamma, T. Sugiura and K. Miya. 1988. "Eddy Current Testing of Graphite Material,"Proc. of 9th Inter. Conf on NDE in the Nuclear Industry, Tokyo, Japan, AMI, 25-28 April, pp. 385-389.
25.
25. Vernon, S. N. and P. M. Gammell. 1985. "Eddy Current Inspection of Broken Fiber Flaws in Non-Metallic Fiber Composites,"Review of Progress in QNDE, Vol. 4B, Plenum Press, pp. 1229-1237.
26.
26. Fitzpatrick, G. L., D. K. Thome, R. L. Skaugset. E. Y C. Shih and N. C. L. Shih. 1993. "Magneto-Optic/Eddy Current Imaging of Ageing Aircraft: A New NDI Technique,"Materials Evaluation, 51(12):1402-1407.
27.
27. Owston, C. N.1976. "Eddy Current Methods for the Examination of Carbon Fiber Reinforced Epoxy Resins,"Materials Evaluation, 34(11):237-244.
28.
28. Valleau, A. R.1990. "Eddy Current Nondestructive Testing of Graphite Composite Materials,"Materials Evaluation, 48(2):230-239.
29.
29. Lowden, D. W., X. E. Gros and P. Strachan. 1994. "Visualising Defect Geometry in Composite Materials,"Proc. Internat. Synp. Advanced Materials for Lightweight Structures, ESTEC, Noordwijk, The Netherlands.
30.
30. Sturges, D. J.1994. "The Role of NDE in Predicting Residual Life for Aircraft Engine Components;"NDTE International, 27(4):179-184.
31.
31. Barbier, P. and P. Blondet. 1992. "Using NDT Techniques in the Maintenance of Aeronautical Products," Report, Aerospatiale, Report No. 93-11587/1/gal.
32.
32. Berens, A. P. and P. W. Hovey. 1981. "Evaluation of NDE Reliability Characterization,"AFWAL-TR-81-4160, Vol. 1, Wright-Patterson Air Force Base: Air Force Wright-Aero Lab.
33.
33. Nockemann, C., G. R. Tillack, H. Wessel, C. Hobbs, and V. Konchina. 1994. "Performance Demonstration in NDT by Statistical Methods: ROC and POD for Ultrasonic and Radiographic Testing:"6thEurop. Conf. on NDT, Nice, France, 24-28 Oct., pp. 37-44.
34.
34. Nockemann, C., G. R. Tillack and D. Schnitger. 1994. "Statistical Assessment within a Global Conception of Reliability of NDE,"Joint CEC OECD UAEA Specialists Meeting on NDE Practice and Results, 8-10 March, The Netherlands.
