To further elucidate the interaction mechanism between infrared lamps and Carbon Fiber Reinforced Polymers (CFRP), this study establishes a relationship between the infrared lamp parameters and the radiation received by the surface of the carbon fiber prepreg, thereby deriving a model linking temperature to interlaminar bonding performance. Based on a controlled heat source model, the study accurately analyzes the impact of lay-up temperature on CFRP interlaminar bonding strength using the Cohesive Zone Model (CZM). The results show that Temperature measurements from infrared thermography and sensors mutually validate each other and align with theoretical analysis. Appropriate installation height and lamp radius significantly enhance the infrared irradiance. At low temperatures, interlaminar bonding strength increases with temperature, while at high temperatures, it decreases. The optimal lay-up temperature and maximum interlaminar bonding strength are identified.
CarosellaSHügleSHelberF, et al.A short review on recent advances in automated fiber placement and filament winding technologies. Compos B Eng2024; 287: 111843.
2.
FragassaCPavlovicAMinakG. On the structural behaviour of a CFRP safety cage in a solar powered electric vehicle. Compos Struct2020; 252: 112698.
3.
MuthukumaranaTVArachchiMAVHMSomarathnaHMCC, et al.A review on the variation of mechanical properties of carbon fibre-reinforced concrete. Constr Build Mater2023; 366: 130173.
4.
RömerMBergersJGabrielF, et al.Temperature control for automated tape laying with infrared heaters based on reinforcement learning. Machines2022; 10: 164.
5.
GrouveWJB. Weld strength of laser-assisted tape-placed thermoplastic composites. PhD Thesis. University of Twente, 2012.
6.
KhanMAMitschangPSchledjewskiR. Parametric study on processing parameters and resulting part quality through thermoplastic tape placement process. J Compos Mater2013; 47(4): 485–499.
VenkatesanCVeluRVaheedN, et al.Effect of process parameters on polyamide-6 carbon fibre prepreg laminated by IR-assisted automated fibre placement. Int J Adv Manuf Technol2020; 108: 1275–1284.
9.
GroveSM. Thermal modelling of tape laying with continuous carbon fibre-reinforced thermoplastic. Composites1988; 19(5): 367–375.
10.
ZhanS. Characterization of prepreg tack behavior and its regulation by placement process parameters. Zhejiang University, 2018.
11.
HörmannPStelzlDLichtingerR, et al.On the numerical prediction of radiative heat transfer for thermoset automated fiber placement. Compos Appl Sci Manuf2014; 67: 282–288.
12.
VignolaFMichalskyJStoffelT. Solar and infrared radiation measurements. Boca Raton, FL: CRC Press, 2019.
13.
DavisCSLemoineFDarnigeT, et al.Debonding mechanisms of soft materials at short contact times. Langmuir2014; 30(35): 10626–10636.
EndruweitAChoongGYHGhoseS, et al.Characterisation of tack for uni-directional prepreg tape employing a continuous application-and-peel test method. Compos Appl Sci Manuf2018; 114: 295–306.
17.
YuanXZhangZMuX, et al.Recent progress on interface characterization methods of carbon fiber reinforced polymer composites. Chem Eng J2024; 499: 156220.
18.
PutnamJWSeferisJCPeltonT, et al.Perceptions of prepreg tack for manufacturability in relation to experimental measures. Sci Eng Compos Mater1995; 4(3): 143–154.
19.
BrooksJRPlattPR. Method and apparatus to determine composite prepreg tack. U.S. Patent 51996; 5: 513–537.
CrossleyRJSchubelPJDe FocatiisDSA. Time–temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing. Compos Appl Sci Manuf2013; 52: 126–133.
22.
EndruweitAChoongGYHGhoseS, et al.Characterisation of tack for uni-directional prepreg tape employing a continuous application-and-peel test method. Compos Appl Sci Manuf2018; 114: 295–306.
23.
ApalakMKGunesRErogluS. Thermal residual stresses in an adhesively bonded functionally graded tubular single lap joint. Int J Adhesion Adhes2007; 27(1): 26–48.
24.
BaneaMDDa SilvaLFMCampilhoR. Mode I fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study. Int J Adhesion Adhes2011; 31(5): 273–279.
25.
RafieeRAbbasiF. Numerical and experimental analyses of the hoop tensile strength of filament-wound composite tubes. Mech Compos Mater2020; 56: 423–436.
26.
RafieeRSotoudehS. A cohesive zone model for predicting the initiation of Mode II delamination in composites under cyclic loading. J Reinforc Plast Compos2021; 40(5-6): 179–192.
27.
RafieeRGhorbanhosseiniA. Investigating interaction between CNT and polymer using cohesive zone model. Polym Compos2018; 39(11): 3903–3911.
28.
YazdanparastRRafieeR. A rate-dependent cohesive zone model for dynamic crack growth in carbon nanotube reinforced polymers. Int J Solid Struct2024; 300: 112932.
29.
RafieeRSotoudehS. A hysteresis cohesive approach for predicting mixed-mode delamination onset of composite laminates under cyclic loading: Part I, model development. Compos Struct2021; 277: 114667.
30.
RafieeRSotoudehS. A hysteresis cohesive approach for predicting mixed-mode delamination onset of composite laminates under cyclic loading: Part II, numerical and experimental analyses. Compos Struct2021; 277: 114668.
31.
LichtingerRHörmannPStelzlD, et al.The effects of heat input on adjacent paths during Automated Fibre Placement. Compos Appl Sci Manuf2015; 68: 387–397.
32.
LiuBCaoSGaoN, et al.Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture. Compos Sci Technol2019; 183: 107829.
33.
KostagiannakopoulouCLoutasTHSotiriadisG, et al.On the interlaminar fracture toughness of carbon fiber composites enhanced with graphene nano-species. Compos Sci Technol2015; 118: 217–225.
