In this study, the polymer/particle interphase region, formed around dispersed and clustered nanoparticles, was represented and evaluated using a novel multi-layer structural model. The physical/mechanical characteristics of each layer were determined by a developed form of De Gennes’s scaling theory. The time-dependent creep behavior of the interphase region was studied by incorporating Burger viscoelastic model into a specifically designed equivalent box model (EBM) with a layered structure. The content and size of clusters were estimated using a specifically developed mechanical model, based on the concept of micro-scale excluded volumes. The overall creep behavior of the polymer nanocomposites was then predicted considering the interaction of the polymer matrix, interphase region, dispersed and aggregated/agglomerated nanoparticle domains (prediction error <5%). The theoretical results were benchmarked against the actual data, obtained from creep and tensile tests, in order to verify the accuracy of the model as well as the applied primary concepts.
HallC. Polymer materials: an introduction for technologists and scientists. London: Wiley, 1989.
2.
ZhangYYuXChengZ. Research on the application of synthetic polymer materials in contemporary public art. Polymers2022; 14: 1208.
3.
SazaliNIbrahimHJamaludinAS, et al.A short review on polymeric materials concerning degradable polymers. IOP Conf Ser Mater Sci Eng2020; 788: 012047. DOI: 10.1088/1757-899X/788/1/012047.
4.
RamakrishnaSMayerJWintermantelE, et al.Biomedical applications of polymer-composite materials: a review. Compos Sci Technol2001; 61: 1189–1224. DOI: 10.1016/S0266-3538(00)00241-4.
5.
NeşerG. Polymer based composites in marine use: history and future trends. Procedia Eng2017; 194: 19–24. DOI: 10.1016/j.proeng.2017.08.111.
6.
DemingTJKlokH-AArmesSP, et al.Polymers at the interface with biology. Biomacromolecules2018; 19: 3151–3162. DOI: 10.1021/acs.biomac.8b01029.
7.
HakobyanKXuJMüllnerM. The challenges of controlling polymer synthesis at the molecular and macromolecular level. Polym Chem2022; 13: 5431–5446. DOI: 10.1039/D1PY01581H.
8.
Oleszko-TorbusNMendrekBKowalczukA, et al.The role of polymer structure in formation of various nano- and microstructural materials: 30 Years of research in the laboratory of nano- and microstructural materials at the centre of polymer and carbon materials PAS. Polymers2021; 13: 2892.
SharifzadehE. Modeling of the tensile strength of immiscible binary polymer blends considering the effects of polymer/polymer interface and morphological variation. Chin J Polym Sci2019; 37: 1176–1182. DOI: 10.1007/s10118-019-2274-4.
11.
MikitaevAKLigidovMKZaikovGE. Polymers, polymer blends, polymer composites and filled polymers: synthesis, properties and applications. New York: Nova Science Publishers, 2006.
12.
ReifsniderKL. Modelling of the interphase in polymer-matrix composite material systems. Composites1994; 25: 461–469. DOI: 10.1016/0010-4361(94)90170-8.
13.
GhadamiHSharifzadehEAzimiN. A scaling theory to approximate the thermal conductivity of the interphase region in polymer nanocomposites. J Reinforc Plast Compos2023; 43: 833–842. DOI: 10.1177/07316844231197266.
14.
ZareY. Study of nanoparticles aggregation/agglomeration in polymer particulate nanocomposites by mechanical properties. Compos - A: Appl Sci Manuf2016; 84: 158–164. DOI: 10.1016/j.compositesa.2016.01.020.
15.
SharifzadehETohfegarESafajou JahankhanemlouM. The influences of the nanoparticles related parameters on the tensile strength of polymer nanocomposites. IJChE2020; 17: 65–78. DOI: 10.22034/ijche.2020.234505.1337.
16.
SharifzadehE. Evaluating the dependency of polymer/particle interphase thickness to the nanoparticles content, aggregation/agglomeration factor and type of the exerted driving force. Iran Polym J (Engl Ed)2021; 30: 1063–1072. DOI: 10.1007/s13726-021-00956-3.
17.
SharifzadehEKaramiMAderF. Formation of nanoparticle aggregates and agglomerates in polymer nanocomposites and their distinct impacts on the mechanical properties. Polym Eng Sci2023; 63: 1303–1313. DOI: 10.1002/pen.26284.
18.
SharifzadehEMalekiM. An energy-based approach to study the aggregation/agglomeration phenomenon in polymer nanocomposites: dispersion force against inter-particle cohesion. Polym Compos2022; 43: 5145–5158. DOI: 10.1002/pc.26804.
19.
SharifzadehEAzimiNZamanian-FardA, et al.An energy-based strategy to predict the thickness and content of randomly oriented nanolayers aggregates/agglomerates in thermoplastic polymer nanocomposites: experimental and analytical approaches. Polym Eng Sci2023; 63: 2733–2744. DOI: 10.1002/pen.26401.
20.
BaileyMRGmürTAGrilloF, et al.Modular attachment of nanoparticles on microparticle supports via multifunctional polymers. Chem Mater2023; 35: 3731–3741. DOI: 10.1021/acs.chemmater.3c00555.
21.
SharifzadehEMohammadiR. Temperature-/Frequency-dependent complex viscosity and tensile modulus of polymer nanocomposites from the glassy state to the melting point. Polym Sci Eng2021; 61: 2600–2615. DOI: 10.1002/pen.25786.
22.
De GennesP. Scaling theory of polymer adsorption. J Phys France1976; 37: 1445–1452. DOI: 10.1051/jphys:0197600370120144500.
23.
JainSGoossensJGPPetersGWM, et al.Strong decrease in viscosity of nanoparticle-filled polymer melts through selective adsorption. Soft Matter2008; 4: 1848–1854. DOI: 10.1039/B802905A.Replaced stl from CrossRef] [Suggestion Available for last-page from CrossRef] [CS: 100].
24.
JessonDAWattsJF. The interface and interphase in polymer matrix composites: effect on mechanical properties and methods for identification. Polym Rev2012; 52: 321–354. DOI: 10.1080/15583724.2012.710288.
MsekhMACuongNHZiG, et al.Fracture properties prediction of clay/epoxy nanocomposites with interphase zones using a phase field model. Eng Fract Mech2018; 188: 287–299. DOI: 10.1016/j.engfracmech.2017.08.002.
27.
TalebiHSilaniMBordasSPA, et al.A computational library for multiscale modeling of material failure. Comput Mech2014; 53: 1047–1071. DOI: 10.1007/s00466-013-0948-2.
28.
ZareYRheeKY. Study on the effects of the interphase region on the network properties in polymer carbon nanotube nanocomposites. Polymers2020; 12: 182.
29.
HojatzadehSSharifzadehERahimpourF. An EBM based multi-stage mechanical model to predict the time-dependent creep behavior of semi-crystalline polymer nanocomposites. Mech Mater2023; 184: 104737. DOI: 10.1016/j.mechmat.2023.104737.
30.
OkukaASZoricaD. Fractional Burgers models in creep and stress relaxation tests. Appl Math Model2020; 77: 1894–1935. DOI: 10.1016/j.apm.2019.09.035.
31.
GebrehiwotSZEspinosa-LealLAnderssonM, et al.On the short-term creep and recovery behaviors of injection molded and additive-manufactured tough polylactic acid polymer. JMEP2023; 32: 10412–10430. DOI: 10.1007/s11665-023-08278-6.
32.
SharifzadehEGhasemiISafajou-JahankhanemlouM. Modulus prediction of binary phase polymeric blends using symmetrical approximation systems as a new approach. Iran Polym J (Engl Ed)2015; 24: 735–746. DOI: 10.1007/s13726-015-0362-z.
33.
MaXZareYRheeKY. A two-step methodology to study the influence of aggregation/agglomeration of nanoparticles on young’s modulus of polymer nanocomposites. Nanoscale Res Lett2017; 12: 621. DOI: 10.1186/s11671-017-2386-0.
34.
AderFSharifzadehEAzimiN. A novel strategy to predict the tensile strength of polymer/particle interphase based on De Gennes's self-similar carpet theory. Polym Eng Sci2023; 63: 3353–3361. DOI: 10.1002/pen.26449.
35.
SharifzadehECheraghiK. Temperature-affected mechanical properties of polymer nanocomposites from glassy-state to glass transition temperature. Mech Mater2021; 160: 103990. DOI: 10.1016/j.mechmat.2021.103990.
36.
SharifzadehE. Modeling of the mechanical properties of blend based polymer nanocomposites considering the effects of janus nanoparticles on polymer/polymer interface. CJPS2019; 37: 164–177. DOI: 10.1007/s10118-019-2178-3.
37.
AshrafMAPengWZareY, et al.Effects of size and aggregation/agglomeration of nanoparticles on the interfacial/interphase properties and tensile strength of polymer nanocomposites. Nanoscale Res Lett2018; 13: 214. DOI: 10.1186/s11671-018-2624-0.
38.
SharifzadehESalami-KalajahiMHosseiniMS, et al.Synthesis of silica Janus nanoparticles by buoyancy effect-induced desymmetrization process and their placement at the PS/PMMA interface. Colloid Polym Sci2017; 295: 25–36. DOI: 10.1007/s00396-016-3977-5.
39.
SharifzadehEAmiriY. The effects of the arrangement of Janus nanoparticles on the tensile strength of blend-based polymer nanocomposites. Polym Compos2020; 41: 3585–3593. DOI: 10.1002/pc.25645.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
