A micromechanics-driven model for compressive fatigue of fiber-reinforced composites

Abstract

A micromechanics model to predict the fatigue life of fiber-reinforced polymer matrix composites (FRPC) is developed and used for estimating compressive fatigue failure of unidirectional carbon fiber composite. The micromechanics model utilizes constituent, fiber, and matrix material properties. An experimental procedure to obtain the matrix properties that are needed is also described. The model is implemented using the finite element method (FEM). The FEM simulations can predict the classic kink band failure seen in pre–preg-based and textile composites. In addition, an envelope fatigue loading approach is utilized to model the fatigue cycle. Using the combination of matrix fatigue degradation and the fatigue loading method, it is possible to numerically predict the S-N curve, based on the failure mechanics.

Keywords

Fatgiue modeling Compression failure Composite material Micromechanics

Get full access to this article

View all access options for this article.

References

Davidson

Waas

. Compressive failure due to kink band formation in the presence of transverse loading, and accounting for mesoscale and microscale misalignment. Compos Struct 2021; 265: 113760.

Budiansky

Fleck

. Compressive failure of fibre composites. J Mech Phys Sol 1993; 41(1): 183–211.

Davidson

Waas

. Mechanics of kinking in fiber-reinforced composites under compressive loading. Math Mech Sol 2016; 21(6): 667–684. DOI: 10.1177/1081286514535422.

Soutis

Curtis

. A method for predicting the fracture toughness of CFRP laminates failing by fibre microbuckling. Compos A Appl Sci Manufact 2000; 31(7): 733–740, ISSN 1359-835X. DOI: 10.1016/S1359-835X(00)00003-8, http://www.sciencedirect.com/science/article/pii/S1359835X00000038.

Tong

. Bearing failure of composite bolted joints with non-uniform bolt-to-washer clearance. Compos AAppl Sci Manufact 2000; 31(6): 609–615.

Gamstedt

Talreja

. Fatigue damage mechanisms in unidirectional carbon-fibre-reinforced plastics. J Mater Sci 1999; 34: 2535–2546.

Zago

Springer

. Constant amplitude fatigue of short glass and carbon fiber reinforced thermoplastics. J Reinf Plastics Compos 2001; 20(7): 564–595.

Horstemeyer

Staab

. Interface debonding in fatigue cycling of glass reinforced plastics. J Reinf Plastics Compos 1990; 9(1): 446–455.

Ansari

MTA

Singh

Azam

, Fatigue damage analysis of fiber-reinforced polymer composites-A review, J Reinf Plastics Compos 37 (9) (2018) 636–654.

10.

Davidson

Hasanyan

Waas

. Multiscale fatigue modeling of composites. In: AIAA Scitech 2019 Forum, San Diego, CA, 7–11 January 2019. DOI: 10.2514/6.2019-1546

11.

Harper

Hallett

. A fatigue degradation law for cohesive interface elements - development and application to composite materials. Int J Fatigue 2010; 32(11): 1774–1787.

12.

Davidson

Waas

. Effects of out of plane stress on progressive Kinking in internal zero plies. Compos Structures; 272: 114166.

13.

Lee

Soutis

. A study on the compressive strength of thick carbon fibre-epoxy laminates. Compos Sci Technol 2007; 67(10): 2015–2026.

14.

Salvi

Waas

. Characterization of the in-situ non-linear shear response of laminated fiber-reinforced composites. Compos Sci Technol 2010; 70(7): 1126–1134, Special issue on Chiral Smart Honeycombs, ISSN 0266-3538. DOI: 10.1016/j.compscitech.2010.02.024. http://www.sciencedirect.com/science/article/pii/S0266353810000837