The fabrication of biodegradable magnetic poly(caprolactone)(PCL)/nanohydroxyapatite (nHA)/multiwalled carbon nanotube (MWCNT) composite scaffolds by thermally induced phase separation (TIPS) for bone regeneration is reported in this study. The magnetism tests completed on the porous matrices pointed to their ferromagnetic behavior. Both in-vitro degradation and mechanical properties are studied over eight weeks in a phosphate buffered solution (PBS) at 37°C. The addition of MWCNTs at quantities of up to 5% modified the structural morphology of the composite, producing regular structures with repetitive patterns. As from that quantity, the electrostatic charge of the nanotubes within an aqueous solution was insufficient for acceptable distribution of the nanoparticles, by means of ultrasonic dispersion. It resulted in an acceleration of the degradation behavior that was clear from the mechanical properties that weakened by up to 20%. The thermal properties were also influenced in that they formed shorter chains, which could be ordered with greater ease, as a consequence of the ester hydrolysis process.
GumedeTPLuytASMüllerAJ.Review on PCL; PBS; and PCL/PBS blends containing carbon nanotubes. Express Polym Lett2018; 12: 505–529.
2.
WoodruffMAHutmacheDW.The return of a forgotten polymer—Polycaprolactone in the 21st century. Prog Polym Sci2010; 35: 1217–1256.
3.
QuXXiaPHeJ, et al. Microscale electrohydrodynamic printing of biomimetic PCL/nHA composite scaffolds for bone tissue engineering. Mater Lett2016; 185: 554–557.
4.
KaramianESaber-SamandariNKhandanS, et al. Fabrication of hydroxyl apatite-baghdadite nanocomposite scaffolds coated by PCL/Bioglass with polyurethane polymeric sponge technique. Nanomed J2017; 4: 177–183.
5.
LijimaS.Helical microtubules of graphitic carbon. Nature. 1991; 354: 56–58.
6.
LiuMYangYZhuT, et al. Chemical modification of single-walled carbon nanotubes with peroxytrifluoroacetic acid. Carbon2005; 43: 1470–1478.
7.
MaPCSiddiquiAMaromG, et al. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review. Composites2010; 41: 1345–1367.
8.
QianDDickeyECAndrewsR, et al. Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites. Appl Phys Lett2000; 76: 2868–2874.
ShiXHudsonJLSpicerPP, et al. Rheological behaviour and mechanical characterization of injectable poly (propylene fumarate)/single-walled carbon nanotube composites for bone tissue. Nanotechnology2005; 16: S531–S538.
11.
BalaniKAndersonRLahaT, et al. Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro. Biomaterials2007; 28: 618–624.
12.
DíazEPuertoISandonisI, et al. Hydrolytic degradation and cytotoxicity of poly(lactic‐co‐glycolic acid)/multiwalled carbon nanotubes for bone regeneration. J Appl Polym Sci2020; 3: 48439–48447.
13.
PengZHolmAHNielsenLT, et al. Nanotubos de carbono: funcionalización y aplicaciones biológicas. Chem Mater2012; 20: 6068–6074.
14.
EnyashinANIvanovskiiAL.Functionalization of carbon nanotubes by covalently bonded graphite nanoplatelets: a theoretical study. Mendeleev Commun2007; 17: 199–201.
15.
WangCZhangJRyuK, et al. Wafer-scale fabrication of separated carbon nanotube thin-film transistors for display applications. Nano Lett2009; 9: 4285–4291.
16.
LiXMGaoHUoM, et al. Effect of carbon nanotubes on cellular functions in vitro. J Biomed Mater Res A2009; 91: 132.
17.
TranPASarinLHurtRH, et al. Opportunities for nanotechnology-enabled bioactive bone implants. J Mater Chem2009; 19: 2653–2659.
18.
MarganskaMSzopaMZipperE.Orbital magnetic moments in pure and doped carbon nanotubes. Phys Rev B2005; 72: 11.
19.
PengJZhaoJLongY, et al. High-performance non-enzymatic glucose sensors based on CoNiCu alloy nanotubes arrays prepared by electrodeposition. Frontiers Mater2019; 6: 1–9.
20.
ASTM 695-02 Standard Test Method for Compressive Properties of Plastics. West Conshohocken, PA: ASTM International, www.astm.org
21.
ASTM D638-3 Standard Test Method for Tensile Properties of Plastics. West Conshohocken, PA: ASTM International, www.astm.org
22.
CrescenziVManziniGCalzolariG, et al. Thermodynamics of fusion of poly-β-propiolactone and poly-ϵ-caprolactone. comparative analysis of the melting of aliphatic polylactone and polyester chain. Eur Polym J1972; 8: 449–463.
23.
OxanaVKharissovaKBorisI, et al. Dispersion of carbon nanotubes in water and non-aqueous solvents. RSC Adv2013; 3: 24812–24852.
24.
FengJSuiWCaiJ, et al. Preparation and characterization of magnetic multi-walled carbon nanotubes–poly (l-lactide) composite. Mater Sci Eng B2008; 150: 208–211.
25.
PanLLPeiXBHeR, et al. Tissue engineering using ceramics and polymers. Colloids Surf B Biointerfaces2012; 93: 226–234.
26.
CadekMColemanJNBarronV, et al. Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites. Appl Phys Lett. 2002; 81: 2718–2718.
27.
BabenseeJEAndersonJMMcIntireLV, et al. Host response to tissue engineered devices. Adv. Drug Delivery Rev1998; 33: 111–139.
28.
Mattioli-BelmonteMVozziGWhulanzaY, et al. Tuning polycaprolactone–carbon nanotube composites for bone tissue engineering scaffolds. Mater Sci Eng2012; 32: 152–159.
29.
DíazESandonisIValleMB.In vitro degradation of poly(caprolactone)/nHA composites. J Nanomater2014; 802435: 1–8.
30.
NabipurASuiJAmirianM, et al. Crystallinity of biodegradable polymers reinforced with functionalized carbon nanotubes. J Polym Res2011; 18: 1249–1259.
31.
ZhaoYQuiuZYangW.Effect of functionalization of multiwalled nanotubes on the crystallization and hydrolytic degradation of biodegradable poly(l-lactide). J Phys Chem B2008; 112: 16461–16468.
32.
ElzeinTBroglyMSchultzJ.Quantitative calculation of the orientation angles of adsorbed polyamides nanofilms. Polymer2003; 44: 3649–3660.
33.
ZhouZYiQLiuX, et al. Influence of degradation of polylactide on mass loss, mechanical properties, and crystallinity in phosphate-buffered solution. J Macromol Sci Part B Phys2009; 48: 309–317.
34.
MengZZhengWLiL, et al. Fabrication and characterization of three-dimensional nanofiber membrane of PCL–MWCNTs by electrospinning. Mater Sci Eng C2010; 30: 1014–1021.
