The emerging “green” economy is based on energy efficiency, renewable food stocks in polymeric products, industrial processes that reduce carbon emissions, and recyclable materials. Natural fiber is a type of renewable source and a new generation of reinforcements and integrators for polymer-based materials. Because of its advantages over synthetic fibers, the use of natural fibers as reinforcements in composite materials has become important in recent years. To meet certain design criteria, natural fiber-reinforced composites impose certain secondary operations during assembly. Limited literature is available only in connection with the processing of natural fiber-reinforced composites. This paper analyzes a comprehensive review of the natural fiber-reinforced composite processing literature along with the challenges during processing.
TsydenovaNMorillasAVSalasAAC.Sustainability assessment of waste management system for Mexico City (Mexico) – based on analytic hierarchy process. Recycling2018; 3:1–18
7.
LebretonLAndradyA.Future scenarios of global plastic waste generation and disposal. Palgrave Commun2019; 5: 1–11.
8.
AdesinaOTJamiruTSadikuER, et al. Mechanical evaluation of hybrid natural fibre-reinforced polymeric composites for automotive bumper beam: a review. Int J Adv Manuf Technol2019; 103: 1781–1797.
9.
SiakengRJawaidMAriffinH, et al. Natural fiber reinforced polylactic acid composites: a review. Polym Compos2019; 40: 446–463.
10.
G. S. V. L. Narasimham, A. Veeresh Babu, S. S. R. (n.d.). Recent Trends in Mechanical Engineering: Select Proceedings of ICIME 2019. ( S. S. R. . S. V. L. Narasimham, A. Veeresh Babu, Ed.). springer.
11.
TabanEKhavaninAFaridanM, et al. Comparison of acoustic absorption characteristics of coir and date palm fibers: experimental and analytical study of green composites. Int J Environ Sci Technol2020; 17: 39–48.
ChegdaniFMansoriME.New multiscale approach for machining analysis of natural fiber reinforced bio-composites. J Manuf Sci Eng Trans ASME2019; 141: 1–24.
14.
KhanAKimNShinJK, et al. Damage assessment of smart composite structures via machine learning: a review. JMST Adv2019; 1: 107–124.
FriedrichK.Multi-functionality of polymer composites: challenges and new solutions. Norwich: William Andrew Publishing, 2015.
17.
MohantyAKMisraMHinrichsenG.Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng2000; 276–277: 1–24.
18.
BalasubramanianKSultanMTHCardonaF, et al. Machining analysis of natural fibre reinforced composites using fuzzy logic. IOP Conf Ser Mater Sci Eng2016; 152:1–8.
19.
HapuarachchiTDRenGFanM, et al. Fire retardancy of natural fibre reinforced sheet moulding compound. Appl Compos Mater2007; 14: 251–264.
20.
AkampumuzaOWambuaPMAhmedA, et al. Review of the applications of biocomposites in the automotive industry. Polym Compos2017; 38: 2553–2569.
21.
AhmadFChoiHSParkMK.A review: natural fiber composites selection in view of mechanical, light weight, and economic properties. Macromol Mater Eng2015; 300: 10–24.
22.
FogorasiMSBarbuI.The potential of natural fibres for automotive sector – review. IOP Conf Ser Mater Sci Eng2017; 252:1–10.
23.
KhanTBin Hameed SultanMTAriffinAH.The challenges of natural fiber in manufacturing, material selection, and technology application: a review. J Reinf Plast Compos2018; 37: 770–779.
24.
SaxenaMPappuASharmaAHaqueRWankhedeS.Composite Materials from Natural Resources: Recent Trends and Future Potentials. In Advances in Composite Materials - Analysis of Natural and Man-Made Materials. InTech,2011. https://doi.org/10.5772/18264
25.
BledzkiAGassanJ.Composites reinforced with cellulose. Prog Polym Sci1999; 24: 221–274.
26.
LeeSM.Handbook of composite reinforcements. New York: VCH, 1993.
27.
RazaqA, et al. Dielectric studies of environmentally friendly and flexible lignocelluloses fibrils for miniaturization of patch antenna. Mod Phys Lett B2015; 29: 1–7.
28.
RaymondGTHarbisonJDBourgeoisMM.Hamilton and Hardy’s industrial toxicology. 6th ed. Hoboken, NJ: Wiley.
29.
FengY, et al. Simultaneous improvement in the flame resistance and thermal conductivity of epoxy/Al2O3 composites by incorporating polymeric flame retardant-functionalized graphene. J Mater Chem A2017; 5: 13544–13556.
30.
KimuraTAokiS.Application of silk composite to decorative laminate. Adv Compos Mater2007; 16: 349–360.
31.
FarukOBledzkiAKFinkHP, et al. Biocomposites reinforced with natural fibers: 2000–2010.Prog Polym Sci2012; 37: 1552–1596.
32.
FarukOBledzkiAKFinkHP, et al. Progress report on natural fiber reinforced composites. Macromol Mater Eng2014; 299: 9–26.
33.
ThomasonJYangLGentlesF.Characterisation of the anisotropic thermoelastic properties of natural fibres for composite reinforcement. Fibers2017; 5:1–12.
34.
.Report by ”Raw material,by matrix,by technology(injection molding,compression molding,pultrusion)-2018-2024,2018,1-139,Report ID: 978-1-68038-890-9
35.
BajpaiPKSinghIMadaanJ.Development and characterization of PLA-based green composites: a review. J Thermoplast Compos Mater2014; 27: 52–81.
36.
MansorMRMasturaMTSapuanSM, et al. The environmental impact of natural fiber composites through life cycle assessment analysis. Amsterdam: Elsevier Ltd, 2019.
37.
Lucintel. Growth Opportunities in the Global Natural Fiber Composites Market,Lucintel report, 2015.
38.
PickeringKLEfendyMGALeTM.A review of recent developments in natural fibre composites and their mechanical performance. Compos Part A Appl Sci Manuf2016; 83: 98–112.
39.
ElanchezhianCRamnathBVRamakrishnanG, et al. Review on mechanical properties of natural fiber composites. Mater Today Proc2018; 5: 1785–1790.
40.
ChandramohanDPresin KumarAJ.Experimental data on the properties of natural fiber particle reinforced polymer composite material. Data Brief2017; 13: 460–468.
41.
OmraniEMenezesPLRohatgiPK.State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world. Eng Sci Technol2016; 19: 717–736.
42.
AmirNAbidinKAZShiriFBM.Effects of fibre configuration on mechanical properties of banana fibre/PP/MAPP natural fibre reinforced polymer composite. Procedia Eng2017; 184: 573–580.
JayamaniEHamdanSRahmanMR, et al. Investigation of fiber surface treatment on mechanical, acoustical and thermal properties of betelnut fiber polyester composites. Procedia Eng2014; 97: 545–554.
45.
Rajesh D. Anandjiwala & Sunshine Blouw, Composites from Bast Fibres-Prospects and Potential in the Changing Market Environment, Journal of Natural Fibers,2007, 4:2, 91-109, DOI: 10.1300/J395v04n02_07.
46.
KhondkerOAIshiakuUSNakaiA, et al. Fabrication mechanical properties of unidirectional jute/PP composites using jute yarns by film stacking method. J Polym Environ2005; 13: 115–126.
47.
BolducS, et al. Banana fiber/low-density polyethylene recycled composites for third world eco-friendly construction applications – Waste for Life Project Sri Lanka. J Reinf Plast Compos2018; 37: 1322–1331.
48.
Saravana BavanDMohan KumarGC.Potential use of natural fiber composite materials in India. J Reinf Plast Compos2010; 29: 3600–3613.
49.
ShalwanAYousifBF.In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Mater Des2013; 48: 14–24.
50.
SanjayMRArpithaGRNaikLL, et al. Applications of natural fibers and its composites: an overview. Nat Resour2016; 7: 108–114.
51.
Yashas GowdaTGSanjayMRSubrahmanya BhatK, et al. Polymer matrix-natural fiber composites: an overview. Cogent Eng2018; 5: 1–13.
52.
YotkaewPKositchaiyongAWimolmalaE, et al. Use of synthetic fibers as co-reinforcing agents in wood/PVC hybrid composites: effect on tribological properties. J Reinf Plast Compos2014; 33: 964–976.
53.
GurunathanTMohantySNayakSK.A review of the recent developments in biocomposites based on natural fibres and their application perspectives. Compos Part A Appl Sci Manuf2015; 77: 1–25.
54.
JeyapragashRSrinivasanVSathiyamurthyS.Mechanical properties of natural fiber/particulate reinforced epoxy composites - A review of the literature. In Materials Today: Proceedings, 2020, 22: 1223–1227.doi.org/10.1016/j.matpr.2019.12.146
55.
MadhuPSanjayMRSenthamaraikannanP, et al. A review on synthesis and characterization of commercially available natural fibers: part-I. J Nat Fibers2019; 16: 1132–1144.
56.
JenaPKMohantyJRNayakS.Effect of surface modification of vetiver fibers on their physical and thermal properties. J Nat Fibers2020; 1–12. doi:10.1080/15440478.2020.1726249
57.
PatelKPatelKGohilP, et al. Investigations of milling parameters on hemp fiber reinforced composite using ANOVA and regression. Appl Mech Mater2018; 877: 177–182.
58.
GholampourAOzbakkalogluT. A review of natural fiber composites: properties, modification and processing techniques, characterization, applications. 2020; 55,Journal of Materials Science. Springer New York LLC.,doi.org/10.1007/s10853-019-03990-y.
59.
KoohestaniBDarbanAKMokhtariP, et al. Comparison of different natural fiber treatments: a literature review. Int J Environ Sci Technol2019; 16: 629–642.
60.
BassyouniM.Dynamic mechanical properties and characterization of chemically treated sisal fiber-reinforced polypropylene biocomposites. J Reinf Plast Compos2018; 37: 1402–1417.
61.
RamliN, et al. Natural fiber for green technology in automotive industry: a brief review. IOP Conf Ser Mater Sci Eng2018; 368:1–7.
62.
FerreiraDPCruzJFangueiroR,Surface modification of natural fibers in polymer composites.Green composites for automotive Applications,2019,3-41 DOI: 10.1016/B978-0-08-102177-4.00001-X.
63.
SabaNJawaidMParidahMT, et al. A review on flammability of epoxy polymer, cellulosic and non-cellulosic fiber reinforced epoxy composites. Polym Adv Technol2016; 27: 577–590.
64.
KhanMZRSrivastavaSKGuptaMK.Tensile and flexural properties of natural fiber reinforced polymer composites: a review. J Reinf Plast Compos2018; 37: 1435–1455.
65.
VidalJPonceDMiraveteA, et al. Bio-binders for the improvement of the performance of natural fibers as reinforcements in composites to increase the sustainability in the transport sector. MechAdv Mater Struct2019; 1–9.,doi:10.1080/15376494.2019.1633447
66.
VigneshwaranSUthayakumarMArumugaprabuV, et al. Influence of filler on erosion behavior of polymer composites: a comprehensive review. J Reinf Plast Compos2018; 37: 1011–1019.
67.
OsorioLTrujilloELensF, et al. In-depth study of the microstructure of bamboo fibres and their relation to the mechanical properties. J Reinf Plast Compos2018; 37: 1099–1113.
68.
VisweswaraiahSBSeleznevaMLessardL, et al. Mechanical characterisation and modelling of randomly oriented strand architecture and their hybrids – a general review. J Reinf Plast Compos2018; 37: 548–580.
69.
MochaneMJ, et al. Recent progress on natural fiber hybrid composites for advanced applications: a review. Express Polym Lett2019; 13: 159–198.
70.
SwolfsYVerpoestIGorbatikhL.Recent advances in fibre-hybrid composites: materials selection, opportunities and applications. Int Mater Rev2019; 64: 181–215.
71.
RavishankarBNayakSKKaderMA.Hybrid composites for automotive applications – a review. J Reinf Plast Compos2019; 38: 835–845.
72.
WinkelmannJ.ShamsuyevaM.EndresH. J., Hybrid fabrics for use in bio-based composites for technical applications, Mate-rials Today: Proceedings,2020,doi.org/10.1016/j.matpr.2019.12.097.
73.
SanjayMRArpithaGRSenthamaraikannanP, et al. The hybrid effect of jute/kenaf/E-glass woven fabric epoxy composites for medium load applications: impact, inter-laminar strength, and failure surface characterization. J Nat Fibers2019; 16: 600–612.
74.
SumeshKRKanthavelK.Green synthesis of aluminium oxide nanoparticles and its applications in mechanical and thermal stability of hybrid natural composites. J Polym Environ2019; 27: 2189–2200.
75.
KumarNSinghTGrewalJS, et al. A novel hybrid AHP-SAW approach for optimal selection of natural fiber reinforced non-asbestos organic brake friction composites. Mater Res Express2019; 6:1–22.
76.
CalabreseLFioreVScaliciT, et al. Experimental assessment of the improved properties during aging of flax/glass hybrid composite laminates for marine applications. J Appl Polym Sci2019; 136: 1–12.
VenkateshwaranNSanthanamVAlavudeenA.Feasibility study of fly ash as filler in banana fiber-reinforced hybrid composites. Singapore: Springer Singapore, 2019.
79.
ArulmuruganMPrabuKRajamuruganG, et al. Impact of BaSO4 filler on woven aloevera/hemp hybrid composite: dynamic mechanical analysis. Mater Res Express2019; 6:1–33.
80.
SivakandhanCMuraliGTamiloliN, et al. Studies on mechanical properties of sisal and jute fiber hybrid sandwich composite. Mater Today Proc2020; 21: 404–407.
81.
YorsengKRangappaSMPulikkalparambilH, et al. Accelerated weathering studies of kenaf/sisal fiber fabric reinforced fully biobased hybrid bioepoxy composites for semi-structural applications: morphology, thermo-mechanical, water absorption behavior and surface hydrophobicity. Constr Build Mater2020; 235: 117464.
82.
GoudaKBhowmikSDasB.Thermomechanical behavior of graphene nanoplatelets and bamboo micro filler incorporated epoxy hybrid composites. Mater Res Express2020; 7: 015328.
83.
Godwin AntonyALakshmananPKajendira KumarSV, et al. Experimental evaluation of hybrid composites by the Cu addition. Mater Today Proc2020; 21: 411–414.
84.
PaturelADhakalHN.Influence of water absorption on the low velocity falling weight impact damage behaviour of flax/glass reinforced vinyl ester hybrid composites. Molecules2020; 25: 1–16.
85.
NandaBPSatapathyA.An analysis of the sliding wear characteristics of epoxy-based hybrid composites using response surface method and neural computation. J Nat Fibers2020; ▪: 1–15.,doi:10.1080/15440478.2020.1722781
86.
KureemunUHarisATeoWS, et al. Influence of ply blocking on tensile stiffness in woven flax–carbon hybrids. J Reinf Plast Compos2018; 37: 583–591.
87.
KumarGAKumarMRBabuAMR, et al. Experimental analysis on ballistic performance of newly developed sandwich hybrid natural composites. Mater Today Proc2020; 21: 41–44.
88.
RajuKBalakrishnanM.Evaluation of mechanical properties of palm fiber/glass fiber and epoxy combined hybrid composite laminates. Mater Today Proc2020; 21: 52–55.
89.
ShyhaISooSLAspinwallD, et al. Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites. J Mater Process Technol2010; 210: 1023–1034.
90.
MadhavanVLipczynskiGLaneB, et al. Fiber orientation angle effects in machining of unidirectional CFRP laminated composites. J Manuf Process2015; 20: 431–442.
91.
VoßRHenerichsMKusterF, et al. Chip root analysis after machining carbon fiber reinforced plastics (CFRP) at different fiber orientations. Procedia CIRP2014; 14: 217–222.
92.
TetiR.Machining of composite materials. CIRP Ann Manuf Technol2002; 51: 611–634.
93.
UhlmannERicharzSSammlerF, et al. High speed cutting of carbon fibre reinforced plastics. Procedia Manuf2016; 6: 113–123.
94.
BhatnagarNNaikNKRamakrishnanN.Experimental investigations of drilling on CFRP composites. Mater Manuf Process1993; 8: 683–701.
95.
DavimJPMataFGaitondeVN, et al. Machinability evaluation in unreinforced and reinforced PEEK composites using response surface models. J Thermoplast Compos Mater2010; 23: 5–18.
96.
Herrera-FrancoPJValadez-GonzálezA.Mechanical properties of continuous natural fibre-reinforced polymer composites. Compos Part A Appl Sci Manuf2004; 35: 339–345.
97.
NamTHOgiharaSTungNH, et al. Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly(butylene succinate) biodegradable composites. Compos Part B Eng2011; 42: 1648–1656.
98.
Van de WeyenbergITruongTCVangrimdeB, et al. Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment. Compos Part A Appl Sci Manuf2006; 37: 1368–1376.
99.
IsmailSOOjoSODhakalHN.Thermo-mechanical modelling of FRP cross-ply composite laminates drilling: delamination damage analysis. Compos Part B Eng2017; 108: 45–52.
100.
Merino-PérezJLRoyerRMersonE, et al. Influence of workpiece constituents and cutting speed on the cutting forces developed in the conventional drilling of CFRP composites. Compos Struct2016; 140: 621–629.
101.
IsmailSODhakalHNDimlaE, et al. Recent advances in twist drill design for composite machining: a critical review. Proc Inst Mech Eng Part B J Eng Manuf2017; 231: 2527–2542.
102.
CaggianoA.Machining of fibre reinforced plastic composite materials. Materials2018; 11:1–33.
103.
PanchagnulaKKPalaniyandiK.Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review. J Mater Res Technol2018; 7: 180–189.
104.
AthijayamaniANatarajanUThiruchitrambalamM.Prediction and comparison of thrust force and torque in drilling of natural fibre hybrid composite using regression and artificial neural network modelling. Int J Mach Mach Mater2010; 8: 131–145.
JayabalSNatarajanU.Modelling and optimisation of thrust force, torque and tool wear in drilling of coir fibre reinforced composites using response surface method. Int J Mach Mach Mater2011; 9: 149–172.
107.
ChandramohanDMarimuthuK.Drilling of natural fiber particle reinforced polymer composite material. Int J Adv Eng Res Stud2011; 1: 134–145.
108.
JayabalSNatarajanU.Optimization of thrust force, torque, and tool wear in drilling of coir fiber-reinforced composites using Nelder-Mead and genetic algorithm methods. Int J Adv Manuf Technol2010; 51: 371–381.
109.
Díaz-ÁlvarezARubio-LópezÁSantiusteC, et al. Experimental analysis of drilling induced damage in biocomposites. Text Res J2018; 88: 2544–2558.
110.
JayabalSNatarajanU.Drilling analysis of coir-fibre-reinforced polyester composites. Bull Mater Sci2011; 34: 1563–1567.
111.
.Chegdani, F., & Mansori, M. E,Friction scale effect in drilling natural fiber composites Faissal Chegdani , Mohamed El Mansori ,2019, Id : hal-02151230, 622–630.
112.
RameshMPalanikumarKReddyKH.Influence of tool materials on thrust force and delamination in drilling sisal-glass fiber reinforced polymer (S-GFRP) composites. Procedia Mater Sci2014; 5: 1915–1921.
113.
VenkateshwaranNElayaPerumalA.Hole quality evaluation of natural fiber composite using image analysis technique. J Reinf Plast Compos2012; 32: 1188–1197.
114.
Dilli BabuGSivaji BabuKGowdBUM.Optimization of machining parameters in drilling hemp fiber reinforced composites to maximize the tensile strength using design experiments. Indian J Eng Mater Sci2013; 20: 385–390.
115.
AlsaeedTYousifBF.Machinability of glass/date palm fibre epoxy composites. Int J Mach Mach Mater2014; 16: 129–150.
116.
.Roy Choudhury, M., Debnath, K. A Study of Drilling Behavior of Unidirectional Bamboo Fiber-Reinforced Green Composites. J. Inst. Eng. India Ser. C101, 2020,219–227 ,doi.org/10.1007/s40032-019-00550-w
117.
PradeepS,T.Rajasekharan, Cutting force analysis on Drilling of Natural fiber reinforced polymer composite material,Proceedings of the 2nd International Conference on Advanced Technologies for Societal Applications - Volume 2,2018..
118.
SaraswatiPKSahooSParidaSP, et al. Fabrication, characterization and drilling operation of natural fiber reinforced hybrid composite with filler (fly-ash/graphene). Int J Innov Technol Explor Eng2019; 8: 1653–1659.
119.
MalakarC.TrishulM. A.Shreyas, Investigation of drilling characteristics of screwpine fibers reinforced composite. Materials Today: Proceedings.2019,doi.org/10.1016/j.matpr.2019.09.038
120.
ShettyR.BarbozaA. B. V.NayakR, Mechanical and machinability study on discontinuously reinforced sisal fibre polyester composite laminates. Materials Research Express, 2019,6(10). doi.org/10.1088/2053-1591/ab3665.
121.
PatelUPatelKGohilP, et al. Investigations on drilling of unidirectional hemp-polyester composites. Int J Mech Eng Technol2019; 10: 707–718.
122.
JayaprakashVSivasaravananSBupesh RajaVK, et al. Optimization of drilling parameters of epoxy/rice husk composite material. Mater Today Proc2020; 21: 104–107.
123.
Belaadi, A., Laouici, H. & Bourchak, M. Mechanical and drilling performance of short jute fibre-reinforced polymer biocomposites: statistical approach. Int J Adv Manuf Technol,2020,106, 1989–200, https://doi.org/10.1007/s00170-019-04761-4.
124.
GokulkumarSThylaPRArunRamnathR, et al. Acoustical analysis and drilling process optimization of Camellia sinensis/Ananas comosus/GFRP/epoxy composites by TOPSIS for indoor applications. J Nat Fibers2020; 1–18.,doi:10.1080/15440478.2020.1726240
125.
PanneerselvamTRaghuramanSKandavelTK, et al. Evaluation and analysis of delamination during drilling on sisal-glass fibres reinforced polymer. Meas J Int Meas Confed2020; 154: 107462.
126.
RibeiroJECésarMBLopesH.Optimization of machining parameters to improve the surface quality. Procedia Struct Integr2017; 5: 355–362.
127.
DavimJPReisP.Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments. J Mater Process Technol2005; 160: 160–167.
128.
ChegdaniFMezghaniSMansoriME.Experimental study of coated tools effects in dry cutting of natural fiber reinforced plastics. Surf Coatings Technol2015; 284: 264–272.
129.
ZurayyenMMutalibAJamalMJ.Effect of machining parameters on delamination during milled banana fiber reinforced polyester composites. J Eng Sci Res2017; 1: 9–13.
130.
BabuGDBabuKSGowdBUM.Effect of machining parameters on milled natural fiber-reinforced plastic composites. J Adv Mech Eng2013; 1: 1–12.,doi:10.7726/jame.2013.1001
131.
VossRSeeholzerLKusterF, et al. Influence of fibre orientation, tool geometry and process parameters on surface quality in milling of CFRP. CIRP J Manuf Sci Technol2017; 18: 75–91.
132.
AnandPLShivadeSBhagatS, et al. Optimization of machining parameters for turning using Taguchi approach. Int J Recent Technol Eng2014; 3: 337–340.
133.
GhaniJAChoudhuryIAHassanHH.Application of Taguchi method in the optimization of end milling parameters. J Mater Process Technol2004; 145: 84–92.
134.
VinayagamoorthyRRajmohanT.Machining and its challenges on bio-fibre reinforced plastics: a critical review. J Reinf Plast Compos2018; 37: 1037–1050.
135.
Bin HarunAHaronCHBCGhaniJBA, et al. Study the effect of milling parameters on surface roughness during milling kenaf fibre reinforced plastic. Adv Environ Biol2015; 9: 46–52.
136.
IzamshahRAzamMAHadzleyM, et al. Study of surface roughness on milling unfilled-polyetheretherketones engineering plastics. Procedia Eng2013; 68: 654–660.
137.
VinayagamoorthyRManojIVNarendra KumarG, et al. A central composite design based fuzzy logic for optimization of drilling parameters on natural fiber reinforced composite. J Mech Sci Technol2018; 32: 2011–2020.
138.
CharletKBéakouA.Mechanical properties of interfaces within a flax bundle part I: experimental analysis. Int J Adhes Adhes2011; 31: 875–881.
139.
ÇelikYHKilickapEKilickapAİ.An experimental study on milling of natural fiber (jute)-reinforced polymer composites. J Compos Mater2019; 53: 3127–3137.
140.
AzmiHHaronCHCGhaniJA, et al. Study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology. ARPN J Eng Appl Sci2016; 11: 4761–4766.
141.
ChegdaniFMezghaniSMansoriME, et al. Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics. Wear2015; 332–333: 772–779.
142.
SankarBRUmamaheswarraoPSrinivasuluV, et al. Optimization of milling process on jute polyester composite using Taguchi based grey relational analysis coupled with principle component analysis. Mater Today Proc2015; 2: 2522–2531.
143.
ChegdaniFMansoriME.Tribo-functional effects of double-crossed helix on surface finish, cutting friction and tool wear mechanisms during the milling process of natural fiber composites. Wear2019; 426–427: 1507–1514.
144.
EllenbergerAPolliMLDe AzevedoEC, et al. End milling of banana stem fiber and polyurethane derived from castor oil composite. J Nat Fibers2019; ▪: 1–10. doi:10.1080/15440478.2019.1691124
145.
MustafaARAzmiAIZakariaMS, et al. Evaluation of delamination damage and surface roughness in end milling flax fibre composites. IOP Conf Ser Mater Sci Eng2019; 670.
146.
Arun RamnathRThylaPRKumarNM, et al. Optimization of machining parameters of composites using multi-attribute decision-making techniques: a review. J Reinf Plast Compos2018; 37: 77–89.
147.
ZajacJHutyrováZOrlovskýI.Investigation of surface roughness after turning of one kind of the bio-material with thermoplastic matrix and natural fibers. Adv Mater Res2014; 941–944: 275–279.
148.
SivakiranGGangwalYVenkatachalamG, et al. Investigations on machining of banana fibre reinforced hybrid polymer matrix composite materials.Mater Today Proc2018; 5: 7908–7914.
149.
LotfiA.LiH.DaoD. V.PrustyG, Natural fiber–reinforced composites: A review on material, manufacturing, and machinability. Journal of Thermoplastic Composite Materials.,2019,doi.org/10.1177/0892705719844546
150.
NurhanizaMAriffinMKAMMustaphaF, et al. Analyzing the effect of machining parameters setting to the surface roughness during end milling of CFRP-aluminium composite laminates. Int J Manuf Eng2016; 2016: 1–9.
151.
O’HaraJFangF.Advances in micro cutting tool design and fabrication. Int J Extreme Manuf2019; 1: 032003.
152.
HaiderJHashmiMSJ.Health and environmental impacts in metal machining processes. Vol. 8. Amsterdam: Elsevier, 2014.
153.
SrivatsanTSLaneCTBowdenDM. “Machining of composite materials II,” no. 2, pp.85–94, 1994.
154.
Deepak KumarSGhoseJMandalA.Thixoforming of light-weight alloys and composites: an approach toward sustainable manufacturing. Amsterdam: Elsevier Inc., 2019.
155.
PawarPJVidhateUSKhalkarMY.Improving the quality characteristics of abrasive water jet machining of marble material using multi-objective artificial bee colony algorithm. J Comput Des Eng2018; 5: 319–328.
156.
DhanawadeAKumarSKalmekarRV.Abrasive water jet machining of composites: a review. Def Sci J2014; 66: 522–528.
SelvanMCP, et al. Assessment of process parameters in abrasive waterjet cutting of granite. Front Mech Eng2012; 1: 929–933.
159.
VigneshwaranSUthayakumarMArumugaprabuV.Abrasive water jet machining of fiber-reinforced composite materials. J Reinf Plast Compos2018; 37: 230–237.
160.
KalirasuSRajiniNRajeshS, et al. AWJM performance of jute/polyester composite using MOORA and analytical models. Mater Manuf Process2017; 32: 1730–1739.
161.
HochengHTsaiHYShiueJJ, et al. Feasibility study of abrasive-waterjet milling of fiber-reinforced plastics. J Manuf Sci Eng Trans ASME1997; 119: 133–142.
162.
.Vigneshwaran, S., Uthayakumar, M., & Arumugaprabu, V,Abrasive water jet machining of fiber-reinforced composite materials. Journal of Reinforced Plastics and Composites,2017, 37(4), 230–237. doi:10.1177/0731684417740771
163.
MadaraSRSarathRNSVargheseJT, et al. Experimental investigations on abrasive waterjet machining of hybridized kevlar with jute fiber reinforced epoxy composite using Taguchi ANOVA approach. In: 2019 Advances in Science and Engineering Technology International Conference ASET 2019, 2019, IEEE, pp.1–9. doi:10.1109/icaset.2019.8714323
164.
JaniSPKumarASKhanMA, et al. Machinablity of hybrid natural fiber composite with and without filler as reinforcement. Mater Manuf Process2016; 31: 1393–1399.
165.
JagadishBhowmikSRayA.Prediction and optimization of process parameters of green composites in AWJM process using response surface methodology. Int J Adv Manuf Technol -87,2016; 87: 1359–1370.
166.
JagadishBhowmikSRayA.Prediction of surface roughness quality of green abrasive water jet machining: a soft computing approach. J Intell Manuf2019; 30: 2965–2979.
167.
SumeshKRKanthavelK.Abrasive water jet machining of sisal/pineapple epoxy hybrid composites with the addition of various fly ash filler. Mater Res Express2020; 7.
168.
Manjunath PatelGCJagadishKumarRS, et al. Optimization of abrasive water jet machining for green composites using multi-variant hybrid techniques, In: Gupta K,Gupta M (eds)Optimization of Manufacturing Processes.Springer Series in Advanced Manufacturing.Springer,cham2020.
169.
PatelJKShaikhAA.Parameters on banana fiber reinforced. 2014; 3: 608–613.
170.
Sania Akhtar, Narayanappa Ramesha and Siddaramaiah. Abrasive water jet machining and mechanical behavior of banyan tree saw dust powder loaded polypropylene green composites. 2016; 1754–1764.
171.
DhakalHNIsmailSOOjoSO, et al. Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses. Int J Adv Manuf Technol2018; 99: 2833–2847.
172.
PrabuVAKumaranSTUthayakumarM.Performance evaluation of abrasive water jet machining on banana fiber reinforced polyester composite. J Nat Fibers2017; 14: 450–457.
173.
JagadishGuptaKRajakumaranM.Evaluation of machining performance of pineapple filler based reinforced polymer composites using abrasive water jet machining process. IOP Conf Ser Mater Sci Eng2018; 430:1–8.
174.
JayakumarK. Abrasive water jet machining studies on Kenaf/E-Glass fiber polymer composite. In: Proceedings of the 10th international conference on precision, meso, micro and nano engineering(COPEN 10), 2017, IIT Madras,pp.396–399,ISBN: 978-93-80689-28-9 .
175.
KalirasuKRajiniSRajeshN, et al. AWJM performance of jute/polyester composite using MOORA and analytical models. J Mater Manuf Process2017; 32: 1730–1739.
176.
MullerMD’AmatoRRudawskaA.Machining of polymeric composites by means of abrasive water-jet technology. Eng Rural Dev2017; 16: 121–127.
177.
KalirasuSRajiniNWinowlin JappesJT, et al. Mechanical and machining performance of glass and coconut sheath fibre polyester composites using AWJM. J Reinf Plast Compos2015; 34: 564–580.
178.
El-HofyMHelmyMOEscobar-PalafoxG, et al. Abrasive water jet machining of multidirectional CFRP laminates. Procedia CIRP2018; 68: 535–540.
179.
MeijerJ.Laser beam machining (LBM), state of the art and new opportunities. J Mater Process Technol2004; 149: 2–17.
180.
ChryssolourisGSalonitisK.Fundamentals of laser machining of composites. Mach Technol Compos Mater2012; 266–287.doi.org/10.1533/9780857095145.2.266
181.
Dutta MajumdarJMannaI.Laser processing of materials. Sadhana AcadProc Eng Sci2003; 28: 495–562.
ChryssolourisGStavropoulosPSalonitisK.Process of Laser Machining. In: NeeA. (eds) Handbook of Manufacturing Engineering and Technology. London: Springer, 2013, pp.1-25, doi.org/10.1007/978-1-4471-4976-7_74-2
184.
HejjajiASinghDKubherS, et al. Machining damage in FRPs: laser versus conventional drilling. Compos Part A Appl Sci Manuf2016; 82: 42–52.
185.
LiMGanGZhangY, et al. Thermal defect characterization and strain distribution of CFRP laminate with open hole following fiber laser cutting process. Opt Laser Technol2020; 122:1–11.
186.
TamrinKFMoghadasiKSheikhNA.Experimental and numerical investigation on multi-pass laser cutting of natural fibre composite. Int J Adv Manuf Technol2020; 107: 1483–1504.
187.
TewariRSinghMKZafarS, et al. Parametric optimization of laser drilling of microwave-processed kenaf/HDPE composite. Polym Polym Compos2020.
188.
Nontraditional machining of FRPs As. In: Machining of polymer composites. Berlin: Springer, 2009. J.Y. Sheikh-Ahmad. Nontraditional machining of FRPs,Machining of Polymer composites, 2009. Boston: Springer .
189.
JiaZFuRNiuB, et al. Novel drill structure for damage reduction in drilling CFRP composites. Int J Mach Tools Manuf2016; 110: 55–65.
190.
ZemannRSacherlJHakeW, et al. New measurement processes to define the quality of machined fibre reinforced polymers. Procedia Eng2015; 100: 636–645.
191.
TsaoCCHochengH.Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills. Int J Mach Tools Manuf2005; 45: 1282–1287.
192.
HochengH (ed). Machining technology for composite materials. Cambridge: Woodhead Publishing.
193.
KhashabaUA.Drilling of polymer matrix composites: a review. J Compos Mater2013; 47: 1817–1832.
194.
VinayagamoorthyRRajeswariNKarthikeyanS.Investigations of damages during drilling of natural sandwich composites. Appl Mech Mater2015; 766–767: 812–817.
195.
AzmiHHaronCHCGhaniJA, et al. Machinability study on milling kenaf fiber reinforced plastic composite materials using design of experiments. IOP Conf Ser Mater Sci Eng2018; 344:1–15.
196.
ArolaDSultanMBRamuluM.Finite element modeling of edge trimming fiber reinforced plastics. J Manuf Sci Eng Trans ASME2002; 124: 32–41.
197.
JoseSSalimRAmmayappanL.An overview on production, properties, and value addition of pineapple leaf fibers (PALF). J Nat Fibers2016; 13: 362–373.
198.
Manjunath Patel RSKGC, Jagadish and Naidu NVS. Optimization of abrasive water jet machining for green composites using multi-variant hybrid techniques. In: Optimization of manufacturing processes. Berlin: Springer, 2020, pp.129–162. doi:10.1007/978-3-030-19638-7_6
199.
DavimJPBarricasNConceiçãoM, et al. Some experimental studies on CO2 laser cutting quality of polymeric materials. J Mater Process Technol2008; 198: 99–104.
200.
BhaskarVKumarDSinghKK.Laser processing of glass fiber reinforced composite material: a review. Aust J Mech Eng2019; 17: 95–108.
