Hybrid laminates consisting of fiber-reinforced thermoplastic films and metallic thin sheets are successively replacing thermoset-based systems due to their obvious advantages of higher formability and the aptitude for mass production. In order to monitor the material under operating condition, hybrid laminates need to be equipped with smart sensor units. Therefore, the aim of the present work is to evaluate the temperature stability of the Ni-C thin film strain gauge sensors. The analyses of the deposited Ni-C films manufactured by means of a magnetron sputtering process were carried out by means of Raman spectroscopy and X-ray diffraction to investigate the phase development after a heat treatment at different temperatures and holding times. In addition, the four-terminal sensing was utilized to study the change of temperature coefficients of resistance after a single annealing treatment.
KaziIHWildPMMooreTNet al.
The electromechanical behavior of nichrome (80/20 wt.%) film. Thin Solid Films2003;
433: 337–343.
2.
KaziIHWildPMMooreTNet al.
Characterization of sputtered nichrome (Ni-Cr 80/20 wt.%) films for strain gauge applications. Thin Solid Films2006;
515: 2602–2606.
3.
PetersenMHeckmannUBandorfRet al.
Me-DLC films as material for highly sensitive temperature compensated strain gauges. Diam Relat Mater2011;
20: 814–818.
4.
SchultesGFreyPGoettelDet al.
Strain sensitivity of nickel-containing amorphous hydrogenated carbon (Ni:α-C:H) thin films prepared by r.f. sputtering using substrate bias conditions. Diam Relat Mater2006;
15: 80–89.
5.
KoppertRGoettelDFreitag-WeberOet al.
Nickel containing diamond like carbon thin films. Solid State Sci2009;
11: 1797–1800.
6.
BayerBCBosworthDAMichaelisFBet al.
In situ observations of phase transitions in metastable nickel (carbide)/carbon nanocomposites. J Phys Chem C Nanomater Interfaces2016;
120: 22571–22584.
7.
SedláĉkováKLobotkaPVávraIet al.
Structural, electrical and magnetic properties of carbon-nickel composite thin films. Carbon2005;
43: 2192–2198.
8.
KoppertRUhligSSchmid-EngelHet al.
Structural and physical properties of highly piezoresistive nickel containing hydrogenated carbon thin films. Diam Relat Mater2012;
25: 50–58.
9.
BosworthDAStelmeshenkoNABarberZH.Structural control of carbon nickel nano–composite thin films without substrate heating. Thin Solid Films2013;
540: 10–16.
10.
SinharoySLevensonLL.The formation and decomposition of nickel carbide in evaporated nickel films on graphite. Thin Solid Films1978;
53: 31–36.
11.
SellaCKaabouchiMKrishnanRet al.
Microstructural and magnetic characterization of the interfaces in Ni/C and Co/C multilayers. Vacuum. 1990;
41: 1247–1250.
12.
ShiJNittonoO.Formation of Ni3C nanocrystallites in codeposited Ni-C films. J Mater Sci Lett1996;
15: 928–930.
13.
GhoshBDuttaHPradhanSK.Microstructure characterization of nanocrystalline Ni3C synthesized by high-energy ball milling. J Alloys Compd2009;
479: 193–200.
14.
EllmerKWendtR.D.c. and r.f. (reactive) magnetron sputtering of ZnO:Al films from metallic and ceramic targets: a comparative study. Surf Coat Technol1997;
93: 21–26.
15.
SridharCGChowRNocerinoG.Sputter deposition of refractory metal silicides from cold-pressed vacuum-sintered targets. Thin Solid Films1986;
140: 51–57.
16.
MitinVMankelevichYPalAet al. Features of DC magnetron sputtering of mosaic copper-graphite targets. In: 13th international conference on plasma surface engineering, Garmisch-Partenkirchen, Germany, 10–14 September 2012, pp.227–230.
17.
WettDNestlerDWagnerGet al.
Preparation of Ni-C thin films for strain sensor applications in new hybrid laminates with thermoplastic matrix. Mater Sci Forum2015;
825–826: 548–555.
18.
UhligSStruisRSchmid-EngelHet al.
Piezoresistive Ni:α-C:H thin films containing hcp-Ni or Ni3C investigated by XRD, EXAFS, and wavelet analysis. Diam Relat Mater2013;
34: 25.
19.
FurlanALuJHultmanLet al.
Crystallization characteristics and chemical bonding properties of nickel carbide thin film nanocomposites. J Phys Condens Matter2014;
26: 415501
20.
PacleySMitchelWCMurrayPTet al.
The role of the nickel catalyst and its chemical and structural evolution during carbon nanopearl growth. J Elec Mater2013;
42: 417–425.
21.
RobertsonJ.Diamond-like amorphous carbon. Mater Sci Eng R2002;
37: 129–281.
22.
FerrariACRobertsonJ.Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond. Philos Trans R Soc Lond A2004;
362: 2477–2512.
23.
FerrariAC.Determination of bonding in diamond-like carbon by Raman spectroscopy. Diam Relat Mater2002;
11: 1053–1061.
24.
TuinstraFKoenigJL.Raman spectrum of graphite. J Chem Phys1970;
53: 1126–1130.
25.
TuinstraFKoenigJL.Characterization of graphite fiber surfaces with Raman spectroscopy. J Compos Mater1970;
4: 492–499.
