This study was aimed to investigate the effect of fluorocarbon, hydrocarbon, and hybrid fluorocarbon on the mechanical properties and moisture regain of jute fiber reinforced composite materials. A significant difference in moisture regain values of treated and untreated reinforcement samples was observed, when the concentration of chemical finish (hybrid fluorocarbs) was 40 g/L. The composite made from treated reinforcement regained very low moisture content as well as exhibited improved mechanical properties (tensile and flexural strength). Having both characteristics (hydrophilic and hydrophobic groups) in hybrid fluorocarbon, the treated jute fibers and corresponding composites showed better properties as compared to counterparts treated by other two chemicals, due to better interface.
KhanGMAAlamS. Surface chemical treatments of jute fiber for high value composite uses. J Mater Sci2013; 1: 39–44.
5.
CanteroGArbelaizALlano-PonteR. Effects of fiber treatment on wettability and mechanical behaviour of flax/polypropylene composites. Compos Sci Technol2003; 63: 1247–1254.
6.
JosephKThomastS. Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites. Polymer1996; 37: 5139–5149.
7.
AlixSLebrunLMorvanC. Study of water behaviour of chemically treated flax fibers-based composites: A way to approach the hydric interface. Compos Sci Technol2011; 71: 893–899.
8.
JohnMJAnandjiwalaRD. Recent developments in chemical modification and characterization of natural fiber-reinforced composites. Polym Compos2008; 29: 187–207.
9.
van de VeldeKKiekensP. Thermoplastic polymers: overview of several properties and their consequences in flax fibre reinforced composites. Polym Test. 20: 885–893.
AracriEFillatAColomJF. Enzymatic grafting of simple phenols on flax and sisal pulp fibres using laccases. Bioresour Technol2010; 101: 8211–8216.
20.
FillatAGallardoOVidalT. Enzymatic grafting of natural phenols to flax fibres: Development of antimicrobial properties. Carbohydr Polym2012; 87: 146–152.
21.
UeharaTSakataI. Effect of corona discharge treatment on cellulose prepared from beech wood. J Appl Polym Sci1990; 41: 1695–1706.
22.
SakataIMoritaMFuruichiH. Improvement of plybond strength of paperboard by corona treatment. J Appl Polym1991; 42: 2099–2104.
23.
PodgorskiIRouxM. Wood modification to improve the durability of coatings. Surf Coat Int1999; 82: 590–596.
24.
MaldasDKoktaBDaneaultC. Influence of coupling agents and treatments on the mechanical properties of cellulose fiber-polystyrene composites. J Appl Polym Sci1989; 37: 751–775.
25.
ChtourouHRiedlBKoktaBV. Strength properties of wood-PE composites: Influence of pulp ratio and pretreatment of PE fibers. TAPPI J1997; 80: 141–151.
26.
HedenbergPGatenholmP. Conversion of plastic/cellulose waste into composites. II. Improving adhesion between polyethylene and cellulose using ozone. J Appl Polym Sci1996; 60: 2377–2385.
27.
HonDN-S. Graft copolymerization of lignocellulosic fibers, Washington D.C.: American Chemical Society, 1982.
28.
Meyer J. Wood-polymer composites and their industrial applications. In: Wood technology: Chemical aspects. Washington D.C.: American Chemical Society, 1977.
29.
SebeGBrookMA. Hydrophobization of wood surfaces: Covalent grafting of silicone polymers. Wood Sci Technol2001; 35: 269–282.
30.
GugumusF. Thermooxidative degradation of polyolefins in the solid state-6. Kinetics of thermal oxidation of polypropylene. Polym Degrad Stab1998; 62: 235–243.
31.
KotoyoriT. Activation energy for the oxidative thermal degradation of plastics. Thermochim Acta1972; 5: 51–58.
32.
SeverKSarikanatMSekiY. Surface treatments of jute fabric: The influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester composites. Ind Crops Prod2012; 35: 22–30.
33.
ArklesBPanYKimYM. The role of polarity in the structure of silanes employed in surface modification. Silanes Other Coup Agents2009; 5: 51–64.
34.
SchindlerWDHauserPJ. Chemical finishing of textiles, Cambridge: Elsevier, 2004.
35.
HeywoodD. Textile finishing, Bradford: Society of Dyers and Colourists, 2003.
36.
SinhaERoutSK. Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composite. Bull Mater Sci2009; 32: 65–76.
