Kenaf fibres of different aspect ratios (L/D = 30 and 160) were melt compounded in an internal mixer with two types of starch-grafted-polypropylene matrices (G906PF and G906PJ) at various loadings, i.e. 10, 20 and 30 wt%. The compound was then compression-moulded into plaques of 1-mm thickness. Thermal, rheological and dynamic mechanical properties of the composite samples were investigated by several techniques involving differential scanning calorimetry, thermogravimetric analysis, melt flow index, Vicat softening point and dynamic mechanical thermal analysis. The results indicated that both thermal and mechanical properties of the composites were remarkably improved by kenaf fibres. Loss modulus and loss factor showed a shift of peak transitions to higher temperatures. Finally, the properties of the investigated composite materials were not affected by the fibre aspect ratio.
SgricciaNHawleyMCMisraM. Characterization of natural fiber surfaces and natural fiber composites. Compos A Appl Sci Manuf2008; 39: 1632–1637.
2.
WambuaPIvensJVerpoestI. Natural fibres: can they replace glass in fibre reinforced plastics?Compos Sci Technol2003; 63: 1259–1264.
3.
AkilHMOmarMFMazukiAAM. Kenaf fiber reinforced composites: a review. Mater Design2011; 32: 4107–4121.
4.
KoronisGSilvaAFontulM. Green composites: a review of adequate materials for automotive applications. Compos B Eng2013; 44: 120–127.
5.
Ok HanSKarevanMNa SimI. Understanding the reinforcing mechanisms in kenaf fiber/PLA and kenaf fiber/PP composites: a comparative study. Int J Polym Sci2012, pp. 1–8.
6.
HanYHHanSOChoD. Kenaf/polypropylene biocomposites: effects of electron beam irradiation and alkali treatment on kenaf natural fibers. Compos Interf2007; 14: 559–578.
7.
FengDCaulfieldDFSanadiAR. Effect of compatibilizer on the structure-property relationships of kenaf-fibre/polypropylene composites. Polym Compos2001; 22: 506–517.
8.
LawTTMIZA. Water absorption and dimensional stability of short kenaf fiber-filled polypropylene composites treated with maleated polypropylene. J Appl Polym Sci2011; 120: 563–572.
9.
PracellaMHaqueMM-UAlvarezV. Functionalization, compatibilization and properties of polyolefin composites with natural fibers. Polymers2010; 2: 554–574.
TessierRLafrancheEKrawczakP. Development of novel melt-compounded starch-grafted polypropylene/polypropylene-grafted maleic anhydride/organoclay ternary hybrids. Express Polym Lett2012; 6: 937–952.
12.
HammaAKaciMMohd IshakZA. Starch-grafted-polypropylene/kenaf fibers composites. Part 1: mechanical performances and viscoelastic behaviour. Compos Part A Appl S2014; 56: 328–335.
13.
ZampaloniMPourboghratFYankovichSA. Kenaf natural fiber reinforced polypropylene composites: a discussion on manufacturing problems and solutions. Compos Part A Appl S2007; 38: 1569–1580.
14.
MarkJ. Polymer data handbook, 2nd ed. New York: Oxford University Press, 1999.
15.
Craig L and Beyler MMH. Thermal decomposition of polymers. SFPE handbook of fire protection engineering book. 1988. 1 ed. Section one: 110–31.
16.
OgbomoSMChapmanKWebberC. Benefits of low kenaf loading in biobased composites of poly(L-lactide) and kenaf fiber. J Appl Polym Sci2009; 112: 1294–1301.
17.
YussufAAMassoumiIHassanA. Comparison of polylactic acid/kenaf and polylactic acid/rise husk composites: the influence of the natural fibers on the mechanical, thermal and biodegradability properties. J Polym Environ2010; 18: 422–429.
18.
ManoJFKoniarovaDReisRL. Thermal properties of thermoplastic starch/synthetic polymer blends with potential biomedical applicability. J Mater Sci Mater Med2003; 14: 127–135.
19.
ToméLCFernandesSCMSadoccoP. Antibacterial thermoplastic starch chitosan based materials prepared by melt mixing. BioResources2012; 7: 3398–3409.
20.
BryceDJGreenwoodCT. The thermal degradation of starch Part III. The formation of decomposition products from starch and related materials at temperatures between 175℃ and 400℃. Starch - Stärke1963; 15: 359–363.
21.
BryceDJGreenwoodCT. The thermal degradation of starch. Part II. The identification by gas chromatography of the minor volatile products produced at 300℃. Starch - Stärke1963; 15: 285–290.
22.
BockhornHHornungAHornungU. Kinetic study on the thermal degradation of polypropylene and polyethylene. J Anal Appl Pyrolysis1999; 48: 93–109.
23.
RoySBRamarajBShitSC. Polypropylene and potato starch biocomposites: physicomechanical and thermal properties. J Appl Polym Sci2011; 120: 3078–3086.
AmashAZugenmaierP. Morphology and properties of isotropic and oriented samples of cellulose fibre–polypropylene composites. Polymer2000; 41: 1589–1596.
27.
Wulin QiuFZTakashiEndoTakahiroHirotsu. Preparation and characteristics of composites of high-crystalline cellulose with polypropylene: effects of maleated polypropylene and cellulose content. J Appl Polym Sci2003; 87: 337–345.
28.
CaraschiJCLopes LeãoA. Woodflour as reinforcement of polypropylene. Mater Res2002; 5: 405–409.
29.
ViksneABerzinaRAndersoneI. Study of plastic compounds containing polypropylene and wood derived fillers from waste of different origin. J Appl Polym Sci2010; 117: 368–377.
30.
La MantiaFPMorrealeMMohd IshakZA. Processing and mechanical properties of organic filler-polypropylene composites. J Appl Polym Sci2005; 96: 1906–1913.
31.
KumariRItoHTakataniM. Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite. J Wood Sci2007; 53: 470–80.
32.
PardoSGBernalCAresA. Rheological, thermal, and mechanical characterization of fly ash-thermoplastic composites with different coupling agents. Polym Compos2010; 31: 1722–1730.
33.
KráčalíkMPospíšilLŠloufM. Effect of glass fibers on rheology, thermal and mechanical properties of recycled PET. Polym Compos2008; 29: 915–921.
34.
AresABouzaRPardoSG. Rheological, mechanical and thermal behaviour of wood polymer composites based on recycled polypropylene. J Polym Environ2010; 18: 318–325.
35.
LuanLWuWWagnerMH. Rheological behavior of lubricating systems in polypropylene/seaweed composites. J Appl Polym Sci2011; 121: 2143–2148.
