This paper focuses on the numerical analysis of the ballistic performance of Kevlar®-29 under impact of different double-nosed stepped cylindrical projectiles. Numerical modelling based on finite element method was carried out in order to predict the failure mode of the target as well as the ballistic limit. A detailed analysis of the ballistic limit, failure mode and deformation of the targets due to impact of double-nosed projectiles was developed, discussed and compared with those involved in penetration of single-nosed flat and conical projectiles. Significant influence of the projectile geometry was demonstrated: the lowest ballistic limit was obtained with the conical–conical nose shape projectiles.
PregorettiATrainaM In: BunsellAR (ed). Handbook of tensile properties of textile and technical fibres, Cambridge: Woodhead Publishing Limited, 2009, pp. 354–436.
2.
ZhuGGoldsmithWDharanCKH. Penetration of laminated Kevlar® by projectiles – I. Experimental investigation. Int J Solids Struct1992; 29: 399–420.
3.
SikarwarRVelmuruganRMadhuV. Experimental and analytical study of high velocity impact on Kevlar® Epoxy composite plates. Cent Eur J Eng2012; 2: 638–649.
WangYWangXHuX. Experimental study on penetration and perforation of laminated Kevlar®. J Beijing Inst Tech2004; 13: 317–323.
17.
IqbalMAKhanSHAnsariR. Experimental and numerical studies of double-nosed projectile impact on aluminium plates. Int J Impact Eng2013; 54: 232–245.
18.
BørvikTLangsethMHopperstadOSS. Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses Part II: numerical simulations. Int J Impact Eng2002; 27: 37–64.
19.
KpenyigbaKMJankowiakTRusinekA. Influence of projectile shape on dynamic behavior of steel sheet subjected to impact and perforation. Thin-Walled Struct2013; 65: 93–104.
20.
Rodríguez-MillánMVaz-RomeroARusinekA. Experimental study on the perforation process of 5754-H111 and 6082-T6 aluminium plates subjected to normal impact by conical, hemispherical and blunt projectiles. Exp Mech2014; 54: 729–742.
21.
NilakantanGWetzelEDBogettiTA. Finite element analysis of projectile size and shape effects on the probabilistic penetration response of high strength fabrics. Comp Struct2012; 94: 1846–1854.
22.
NilakantanGWetzelEDBogettiTA. Deterministic finite element analysis of the effects of projectile characteristics on the impact response of fully clamped flexible woven fabrics. Comp Struct2013; 95: 191–201.
23.
CheesemanBABogettiBA. Ballistic impact into fabric and compliant composite laminates. Comp Struct2003; 61: 161–173.
24.
HashinZ. Failure criteria for unidirectional fiber composites. Trans ASME J Appl Mech1980; 47: 329–334.
25.
SantiusteCSánchez-SáezSBarberoEA. Comparison of progressive-failure criteria in the prediction of the dynamic bending failure of composite laminated beams. Comp Struct2010; 92: 2406–2414.
26.
López-PuenteJZaeraRNavarroC. Experimental and numerical analysis of normal and oblique ballistic impacts on thin carbon/epoxy woven laminates. Compos Part A – Appl Sci2005; 39: 374–387.
27.
SantiusteCBarberoEMiguélezMH. Computational analysis of temperature effect in composite bolted joints for aeronautical applications. J Reinf Plast Comp2011; 30: 3–11.
28.
SantiusteCDíaz-ÁlvarezJSoldaniX. Modelling thermal effects in machining of CFRP composites. J Reinf Plast Comp2014; 33: 758–766.
29.
IvañezISantiusteCBarberoE. Numerical modelling of foam-cored sandwich plates under high-velocity impact. Comp Struct2011; 93: 2392–2399.
30.
GowerHLCroninDSPlumtreeA. Ballistic impact response of laminated composite panels. Int J Impact Eng2008; 35: 1000–1008.
31.
Cunniff PM. Dimensionless Parameters for optimization of textile-based body armor systems. In: Proceedings of the 18th international and symposium on ballistics, San Antonio, TX, 1999; 1303–1310.
32.
TanVBCKhooKJL. Perforation of Flexible Laminates by Projectile of Different Geometry. Int J Impact Eng2005; 31: 793–810.
33.
SantiusteCOlmedoASoldaniX. Delamination prediction in orthogonal machining of carbon LFRP composites. J Reinf Plast Comp2012; 31: 875–885.
