We present in this paper a numerical simulation of the filling stage of injection molding process of thermoplastic composite reinforced with short fibers. We focused on analyzing the distribution of fiber’s orientation given by the variation of values of second-order orientation’s tensor in a rectangular geometry. The originality of our work is the introduction of a thermo-dependent law describing the behavior of material. This law is obtained experimentally using rheological measurements on online rheometer.
JefferyGB. The motion of ellipsoidal particles immersed in a viscous fluid. Proc Roy Soc London1922; A102: 161–179.
2.
FolgarFTuckerCL. Orientation behavior of fibers in concentrated suspensions. J Reinf Plast Compos1984; 3: 98–119.
3.
AdvaniSGTuckerCLIII. The use of tensors to describe and predict fiber orientation in short fiber composites. J Rheol1987; 31: 751–784.
4.
VincentMGermainYAgassantJFNumerical and experimental study of the fiber motion in reinforced thermoplastic flows. In: GiesekusHHibberdMF (eds). Progress and Trends in Rheology II: Proceedings of the Second Conference of European Rheologists, Prague, 17–20 June, 1986, pp. 144–146.
5.
VincentMAgassantJF. Initiation à la chimie et à la physico-chimie macromoléculaires, Volume 7: Matériaux composites à base de polymères, GFP,, Strasbourg, 1989, pp. 285–314.
6.
HanK-HImY-T. Numerical simulation of three-dimensional fiber orientation in short-fiber reinforced injection-molded parts. J Mater Process Technol2002; 124: 366–371.
7.
LiuWMohantyAKDrzalLT. Injection molded glass fiber reinforced poly(trimethylene terephthalate) composites: Fabrication and properties evaluation. Ind Eng Chem Res2005; 44: 857–862.
8.
Haddout A and Villoutreix G. Rheometer for injection molding machine. Patent N/REF 233489D.14028DL, France, 28 January 1992.
9.
AusiasGAgassantJEVincentM. Rheology of short glass fiber reinforced polypropylene. J Rheol1992; 36: 525–542.
10.
ThomassetJCarreauPJSanschagrinB. Rheological properties of long glass fiber filled polypropylene. J Non-Newtonian Fluid Mech2005; 125: 25–34.
11.
AzaiezJChibaKChinestaF. State-of-the-art on numerical simulation of fiber-reinforced thermoplastic forming processes. Arch Comput Meth Eng2002; 9: 141–198.
12.
BenhadouMHaddoutAVilloutreixG. Rheological behaviour of polymer composites PP/FG at high shear rate. J Reinf Plast Compos2007; 26: 1357–1366.
13.
LeblancJL. Rhéologie expérimentale des polymères à l'état fondu, Liège: Cebedoc, 1974.
14.
HandGL. A theory of anisotropic fluids. J Fluid Mech1962; 13: 33–46.
15.
Coupez T. Stable-stabilized finite element for 3d forming calculation. Cemef, Internal Report, CEMEF, Sophia, Antipolis, 1996.
16.
BatkamSBruchonJCoupezT. A space time discontinuous galerkin method for convection and diffusion in injection moulding. Int J Forming Process2003; 7(1–2): 11–33.
17.
ShenY-KWuC-WYuY-F. Analysis for optimal gate design of thin-walled injection molding. Int Commun Heat Mass Trans2008; 35: 728–734.
18.
BayRSTuckerCLIII. Fiber orientation in simple injection molding. Part II: Experimental results. Polym Compos1992; 13: 332–332.
19.
DarlingtonMWSmithAC. Some features of the injection molding of short fiber reinforced thermoplastics in centre sprue-gated cavities. Polym Compos1987; 8: 16–16.
20.
GuptaMWangKK. Fiber orientation and mechanical properties of short fiber reinforced injection molding composites: simulated and experimental results. Polym Compos1993; 14: 367–367.
21.
Megally A. Study and modeling of fiber orientation in reinforced thermoplastics. PhD Thesis, Ecole des Mines de Paris, 2005.
22.
BritghPFCrowsonFFlokesMJ. A study of the effect or injection speed on fiber orientation in simple molding of short glass fiber-filled polypropylene. J Mater Sci1978; 13: 2497–2497.
23.
VincentMGiroudaTClarkeA. Description and modeling of fiber orientation in injection molding of fiber reinforced thermoplastics. Polymer2005; 46: 6719–6725.
24.
Vincent M. Study of short glass fibers orientation during implementation of the thermoplastic composites. PhD Thesis, Ecole Nationale Supérieure des Mines de Paris, March 1984.
25.
PantaniRCoccorulloISperanzaV. Modeling of morphology evolution in the injection molding process of thermoplastic polymers. Prog Polym Sci2005; 30: 1185–1222.
26.
DrayDGilorminiPRegnierG. Comparison of several closure approximations for evaluating the thermoelastic properties of an injection molded short-fiber composite. Compos Sci Technol2007; 67: 1601–1610.
27.
LeeDJKimMWKimSY. Three dimensional flow simulation and structural analysis on stiffness of fiber reinforced anisotropic parts. Korea-Aust Rheol J2010; 22: 95–103.
28.
ShaharuddinSISSalitMSZainudinES. A review of the effect of moulding parameters on the performance of polymeric composite injection moulding. Turkish J Eng Env Sci2006; 30: 23–34.
