We present a detailed methodology for experimental measurement of fiber orientation distribution in injection-molded discontinuous fiber composites using the method of ellipses on two-dimensional cross sections. Best practices to avoid biases occurring during surface preparation and optical imaging of carbon-fiber-reinforced thermoplastics are discussed. A marker-based watershed transform routine for efficient image segmentation and the separation of touching fiber ellipses is developed. The sensitivity of the averaged orientation tensor to the image sample size is studied for the case of long-fiber thermoplastics. A Mori–Tanaka implementation of the Eshelby model is then employed to quantify the sensitivity of elastic stiffness predictions to biases in the fiber orientation distribution measurements.
HenningFErnstHBrüsselR. LFTs for automotive applications. Reinf Plast2005; 49: 24–33.
2.
MarkarianJ. Long fibre reinforced thermoplastics continue growth in automotive. Plast Addit Compound2007; 9: 20–24.
3.
DenaultJVu-KhanhTFosterB. Tensile properties of injection molded long fiber thermoplastic composites. Polym Compos1989; 10: 313–321.
4.
HassanAYahyaRYahayaAet al.Tensile, impact and fiber length properties of injection-molded short and long glass fiber-reinforced polyamide 6, 6 composites. J Reinf Plast Compos2004; 23: 969–986.
5.
Karger-KocsisJFriedrichK. Fracture behavior of injection-molded short and long glass fiber – polyamide 6.6 composites. Compos Sci Technol1988; 32: 293–325.
6.
ThomasonJ. The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6, 6. Compos Part A Appl Sci Manuf2009; 40: 114–124.
7.
FuS-YLaukeB. Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers. Compos Sci Technol1996; 56: 1179–1190.
8.
VerWeystBETuckerCL IIIFossPHet al.Fiber orientation in 3-D injection molded features: prediction and experiment. Int Polym Process1999; 14: 409–420.
9.
BaileyRRzepkaB. Fibre orientation mechanisms for injection molding of long fibre composites. Int Polym Process1991; 6: 35–41.
LafrancheEKrawczakPCiolczykJPet al.Injection moulding of long glass fiber reinforced polyamide 66: processing conditions/microstructure/flexural properties relationship. Adv Polym Technol2005; 24: 114–131.
12.
HinePDavidsonNDuckettRet al.Hydrostatically extruded glass-fiber-reinforced polyoxymethylene. I: the development of fiber and matrix orientation. Polym Compos1996; 17: 720–729.
13.
PhelpsJHTuckerCL. An anisotropic rotary diffusion model for fiber orientation in short-and long-fiber thermoplastics. J Non-Newton Fluid Mech2009; 156: 165–176.
14.
OrtmanKBairdDWapperomPet al.Prediction of fiber orientation in the injection molding of long fiber suspensions. Polym Compos2012; 33: 1360–1367.
15.
FossPHTsengHCSnawerdtJet al.Prediction of fiber orientation distribution in injection molded parts using Moldex3D simulation. Polym Compos2014; 35: 671–680.
16.
Wang J, Nguyen BN, Mathur R, etal.. Fiber orientation in injection molded long carbon fiber thermoplastic composites. In: Proceedings of the Annual Technical Conference of SPE (SPE-ANTEC), The Society of Plastic Engineers, Paper # 2139172, Orlando, 23–25 March 2015.
17.
Nguyen BN, Fifield LS, Kijewski SA, et al. Predictive engineering tools for injection-molded long-carbon-fiber thermoplastic composites-FY 2015 first quarterly report. Richland, WA: Pacific Northwest National Laboratory (PNNL), 2015.
18.
KawamuraMIkedaSMoritaSet al.Unambiguous determination of 3D fiber orientation distribution in thermoplastic composites using SAM image of elliptical mark and interference fringe. J Compos Mater2005; 39: 287–299.
19.
BrightPCrowsonRFolkesM. A study of the effect of injection speed on fibre orientation in simple mouldings of short glass fibre-filled polypropylene. J Mater Sci1978; 13: 2497–2506.
20.
DarlingtonMSmithA. Some features of the injection molding of short fiber reinforced thermoplastics in center sprue-gated cavities. Polym Compos1987; 8: 16–21.
21.
ShenHNuttSHullD. Direct observation and measurement of fiber architecture in short fiber-polymer composite foam through micro-CT imaging. Compos Sci Technol2004; 64: 2113–2120.
22.
BernasconiACosmiFHineP. Analysis of fibre orientation distribution in short fibre reinforced polymers: a comparison between optical and tomographic methods. Compos Sci Technol2012; 72: 2002–2008.
23.
ThiTBNMoriokaMYokoyamaAet al.Measurement of fiber orientation distribution in injection-molded short-glass-fiber composites using X-ray computed tomography. J Mater Process Technol2015; 219: 1–9.
24.
BayRSTuckerCL. Stereological measurement and error estimates for three-dimensional fiber orientation. Polym Eng Sci1992; 32: 240–253.
25.
EberhardtCClarkeA. Fibre-orientation measurements in short-glass-fibre composites. Part I: automated, high-angular-resolution measurement by confocal microscopy. Compos Sci Technol2001; 61: 1389–1400.
26.
EberhardtCClarkeAVincentMet al.Fibre-orientation measurements in short-glass-fibre composites – II: a quantitative error estimate of the 2D image analysis technique. Compos Sci Technol2001; 61: 1961–1974.
27.
Vélez-GarcíaGMWapperomPBairdDGet al.Unambiguous orientation in short fiber composites over small sampling area in a center-gated disk. Compos Part A Appl Sci Manuf2012; 43: 104–113.
28.
BlancRGermainCBaylouPet al.Fiber orientation measurements in composite materials. Compos Part A Appl Sci Manuf2006; 37: 197–206.
29.
AverousLQuantinJLafonDet al.Determination of 3D fiber orientations in reinforced thermoplastics, using scanning electron microscopy. Acta Stereol1995; 14: 69–74.
30.
LeeKSLeeSWChungKet al.Measurement and numerical simulation of three-dimensional fiber orientation states in injection‐molded short-fiber-reinforced plastics. J Appl Polym Sci2003; 88: 500–509.
31.
AdvaniSGTuckerIII CL. The use of tensors to describe and predict fiber orientation in short fiber composites. J Rheol1987; 31: 751–784.
32.
BayRSTuckerCL III. Stereological measurement and error estimates for three-dimensional fiber orientation. Polym Eng Sci1992; 32: 240–253.
33.
HayesBSGammonLM. Optical microscopy of fiber-reinforced composites, Materials Park, OH, USA: ASM international, 2010.
34.
ReinhardEHeidrichWDebevecPet al.High Dynamic Range Imaging: acquisition, display, and image-based lighting, Burlington, MA, USA: Morgan Kaufmann, 2010.
35.
ZalevskyZ. Extended depth of focus imaging: a review. J Photon Energy2010; 1: 018001–018001.
36.
SoilleP. Morphological Image Analysis: principles and applications, Secaucus, NJ, USA: Springer Science & Business Media, 2013.
37.
Mori Y, Takahashi H and Oka R. Image-to-word transformation based on dividing and vector quantizing images with words. In: First international workshop on multimedia intelligent storage and retrieval management, (MISRM), Orlando, Florida, 30 October 1999, pp.1–9.
38.
Maree R, Geurts P, Piater J, et al. Random subwindows for robust image classification. In: IEEE Computer Society Conference on Computer Vision and Pattern Recognition, 2005 CVPR 2005, San Diego, CA, USA, 20–25 June 2005, pp.34–40. Piscataway, NJ, USA: IEEE.
39.
WangJZLiJWiederholdG. SIMPLIcity: semantics-sensitive integrated matching for picture libraries. IEEE Trans Pattern Anal Mach Intell2001; 23: 947–963.
40.
Mezaris V, Kompatsiaris I and Strintzis MG. An ontology approach to object-based image retrieval. In: 2003 International Conference on Image Processing, 2003 ICIP 2003 proceedings, Barcelona, Spain, 14–17 September 2003, pp.II-511–514, vol. 513. Piscataway, NJ, USA: IEEE.
41.
ChanTFVeseLA. Active contours without edges. IEEE Trans Image Process2001; 10: 266–277.
42.
TremeauABorelN. A region growing and merging algorithm to color segmentation. Pattern Recognit1997; 30: 1191–1203.
43.
Carson C, Belongie S, Greenspan H, et al. Blobworld: image segmentation using expectation-maximization and its application to image querying. In: IEEE Trans Pattern Anal Mach Intell 2002; 24: 1026–1038.
44.
ShiJMalikJ. Normalized cuts and image segmentation. IEEE Trans Pattern Anal Mach Intell2000; 22: 888–905.
45.
Clarke A and Eberhardt C. Microscopy Techniques for Materials, Boca Raton, Fl, USA: Science Woodhead Publishing, CRC Press, 2002.
46.
OtsuN. A threshold selection method from gray-level histograms. Automatica1975; 11: 23–27.
47.
RoerdinkJBMeijsterA. The watershed transform: definitions, algorithms and parallelization strategies. Fund Informat2000; 41: 187–228.
48.
BeucherSMeyerF. The morphological approach to segmentation: the watershed transformation. Opt Eng1992; 34: 433–433.
49.
MeyerFBeucherS. Morphological segmentation. J Vis Commun Image Represent1990; 1: 21–46.
50.
FitzgibbonAPiluMFisherRB. Direct least square fitting of ellipses. IEEE Trans Pattern Anal Mach Intell1999; 21: 476–480.
51.
ZhangZ. Parameter estimation techniques: a tutorial with application to conic fitting. Image Vis Comput1997; 15: 59–76.
52.
Jain AK. Fundamentals of digital image processing, Upper Saddle River, NJ, USA: Prentice-Hall, Inc, 1989.
53.
NguyenBNBapanapalliSKHolberyJDet al.Fiber length and orientation in long-fiber injection-molded thermoplastics – part I: modeling of microstructure and elastic properties. J Compos Mater2008; 42: 1003–1029.
54.
TuckerCL IIILiangE. Stiffness predictions for unidirectional short-fiber composites: review and evaluation. Compos Sci Technol1999; 59: 655–671.
55.
Eshelby JD. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proceedings of the Royal Society of London A: mathematical, physical and engineering sciences, 1957, pp.376–396. London, UK: The Royal Society.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
